REACT 350® II - Energy Absorption Systems

AssemblyRecommended ToolsDocumentationManufacturer’s Instructional ManualManufacturer’s Drawing PackageCutting equipmentGrinder/Hacksaw or TorchRebar cutting bitRotary Hammer Drill22 mm (7/8”) x 178 mm (7”) Concrete Drill Bit (Double Fluted)19 mm (3/4”) x 178 mm (7”) Concrete Drill Bit (Double Fluted)Note: Energy Absorption Systems recommends using double fluted drill bits to achieveoptimum tensile strength when applying the MP-3 ® anchoring system. That decision must beconfirmed with the highway authority authorizing the assembly so it is anchored to theirspecification.HammersSledgehammerWrenchesHeavy duty impact wrench1/4”, 5/16”, 3/8”, 3/4”, 1 7/8" sockets3/4”, 1 1/16”, 1 1/8”, 1 1/4” Deep Hex-head SocketsRatchet and extensions for above socketsStandard adjustable wrench1 1/16”, 1 1/8”, 1 1/4”, 9/16”, 5/8” combination wrenchesLarge Pipe WrenchScrewdriversScrew gun or standard drill with adapter chuck for small screws/boltsFlat ScrewdriverPhillips ScrewdriverPersonal protective equipmentSafety GlassesGlovesApron for MP-3 ® applicationSafety-Toe Shoeswww.energyabsorption.com Revision A July 2013www.highwayguardrail.com 8 All rights in copyright reserved