Fastrax Leaflet - Glyn Store

www.fastraxgps.com9/2010Receivers & Tracking productsUP501NEW!IT520NEW!IT430NEW!Choose from the widest range of GPS receiver solutions in the world!

FASTRAX PRODUCT MATRIXProduct Description TTFFSensivityacq./navig.PowerconsumptionDimensions(mm)FASTRAX 500-SERIES FOR ULTIMATE SENSITIVITYIT500Ultra-sensitive, pin-compatiblewith MP family GPS receivers

Protocols Programmable Chipset Channels Photo NoteNMEA No MTK3329 66+22 IT MP compatible, 10 Hz fixrate, extended power supplyrange , predicted 14 daysA-GPSNMEA No MTK3329 66+22 Up to 10 Hz fix rate,predicted 14 days A-GPSNMEA(default)OSP(binary)NoSiRFstar IVGSD4e48 Client Generated ExtendedEphemeris andSiRFAware for always hotstart feature, advancedpower saving modesNMEA &SiRFLimited with SirfSDKSiRFstarIIIGSC3f/LPx20 Adaptive Trickle-Power.Push-to-Fix.NMEA &SiRFLimited with SirfSDKSiRFstarIIIGSC3e/LPx20 Fastrax IT MP compatibleAdaptive Trickle-PowerPush-to-Fix.NMEA &iTalkYes, iSuite SDKuNav(uN8021RF, uN8130BB)12 Programmable with iSuite3.For embedded applications,Custom protocols. On-boarddata logger.NMEA No MTK3329 66+22 Up to 10 Hz fix rate,predicted 14 days A-GPSNMEA &SiRFNoSiRFstar IIIGSC3e/LPx20 Adaptive Trickle-Power.Push-to-Fix. Connector foroptional external antenna.9/20103

Fastrax in a NutshellFastrax is a leading provider of high performingGPS modules, Software GPSsolutions and Asset Tracking platformsfor device designers and device manufacturers.The product portfolio consistsof multiple GPS receiver modules andGPS antenna modules, novel pure SoftwareGPS solutions for minimized costand optimized GPS functionality in highvolumeconsumer devices, along with aneasy-to-deploy Track & Trace asset trackingplatform. Fastrax Extended SupportServices provide expert advice and consultingin GPS application design, testingand production.GPS / GNSS ReceiversThe company has created a strong brand as a worldleader in developing and manufacturing OEM GPSreceiver modules that meet the most demanding marketrequirements concerning performance, receiversize, power consumption and programmability. Withthe broadest portfolio of GPS receivers, Fastraxensures that any preference and requirement can bemet. The receivers are ideally suited for both industriallocation applications like various asset tracking platformsand high-volume, consumer products such asbattery operated mobile phones, PDA’s, PND’s (PersonalNavigation Devices) and recreational devices.Software GPSLowest cost GPS receiver solutionwith ultimate performanceFastrax Software GPS addresses the requirementsfor extremely low cost, yet high performance GPSand GNSS solution for consumer devices. FastraxSoftware GPS is designed to perform all GPS/GNSScalculations on the main processor, using only a smallportion of the available resources. This allows largesavings in GPS/GNSS hardware cost in consumerelectronics devices.Fastrax iSuite SDKFastrax iSuite Development Environment is the onlyavailable embedded SDK for GPS receiver modules.It offers the programmer a lot of free resources in processingpower, I/O’s and memory size and full controlof the GPS core. Thus cost and space can be reducedin many devices as no external microcontroller ormemory is needed.Fastrax Track & Trace PlatformThe new Fastrax Track&Trace Platform is designedfor telematics device manufacturers and asset trackingservice providers. Fastrax Track&Trace platformoffers hardware and software for asset tracking applicationsallowing companies to focus on providing thetracking service and not using time and resources ondevice development. It is suited for both professionalfleet management applications and a wide range ofGPS-enabled consumer devices and services. FastraxTrack&Trace Platform provides an ideal basis for developmentof applications to track and trace for examplecars, trucks, trailers, motor bikes, boats and rentalequipment.4 www.fastraxgps.comFastrax is privately owned and founded in Finland in 1999.

INDEXFastrax Product Matrix ................................................................................................2Fastrax in a Nutshell ....................................................................................................4Fastrax Products and Services – Overview...................................................................6Fastrax Technology Platforms ......................................................................................7GPS ModulesFastrax 500-Series• Fastrax IT520 and IT500...........................................................8Fastrax 400-Series• Fastrax IT430..........................................................................10Fastrax 300-Series• Fastrax IT310 and IT300.........................................................11Fastrax 03-Series• Fastrax IT03............................................................................12GPS Modules with Integrated Antennas• Fastrax UP501........................................................................14• Fastrax UP300........................................................................15Antenna Modules comparison...............................................................................16Fastrax IT MP concept ..........................................................................................17How to choose • GPS Receiver module.............................................................18• GPS Antenna module.............................................................19Fastrax Software GPS................................................................................................20Software Development Kit iSuiteTM 3 SDK ...............................................................22Evaluation Tools• Fastrax Mini Evaluation Kit.......................................................24• Fastrax Application Boards ....................................................25Fastrax Track & Trace platform...................................................................................26Accessories, connectors, cables and mounting clips .................................................28Order Codes .............................................................................................................29Technical Specifications for Fastrax receiver and antenna modules............................30Fastrax IT, iSuiteTM, iSysTM, iTalkTM are trademarks of Fastrax Ltd. Microsoftand Visual Studio are registered trademarks of Microsoft Corporation. ARM®and RealView® are registered Trademarks of ARM Limited. SiRF, SiRFstar,SiRFAware, Adaptive Trickle-Power, Push-to-Fix, Extended ephemeris, Staticfilter, Track smoothing are registered trademarks of SiRF Technology, Inc /CSR plc. All other products mentioned are registered trademarks or trademarksof their respective owners. Copyright © 2010, Fastrax Ltd.9/20105

Fastrax products and services – overviewBest available GPS chipsets combined with Fastrax extensive hardware, RF design and software knowledgeenable Fastrax to manufacture state of the art OEM GPS receivers for varying needs and requirements atvery low cost. The receivers combined with Fastrax strong support and application design knowledge allowcustomer to integrated GPS functionality in devices with less effort and cost than ever before.GPS Receiver Module Series• Fastrax IT500• Fastrax IT400• Fastrax IT300• Fastrax IT03GPS Receiver Modules with Antenna• Fastrax UP501• Fastrax UP300Highly sensitive, very small,low power consumingand cost-efficient GPSmodules.GPS modules with integrated andoptimized patch antennas.Fastrax solutionsFastrax solutions include, in addition to world-classOEM GPS receiver modules, also the best-of-breedtools for product development and application integration,as well as for testing purposes.Fastrax Engineering Services TeamFastrax Engineering Services Team offers its outstandingexpertise to help integrate Fastrax modules intospecific designs and to optimize GPS performancein any application in order to ensure highest possiblequality in the end products and to allow system developersto concentrate on their core tasks and competencies.These services include, but are notlimited to:IT03 Software Development toolComplete software development environmentiSuite 3 SDK for developing embeddedapplications in GPS modules and for customizingGPS according to varying needs.Antenna design service - to find the best possiblesignal reception in your application, even whenspace is very limited.Solving EMI issues - to identify, avoid or minimizethe harmful impact of Electro Magnetic Interference.System integration issues – to solve any difficultiesin integrating a GPS functionality in customer’sapplication.Evaluation KitsEvaluation tools for all GPS receiversin the lab or on the field.GPS testing – for testing the application in earlystages of development, in order to ensure bestavailable functionality and quality.GPS Design Verification – for verifying design filesalready prior to ordering proto types in order tosave time and development cost.6 www.fastraxgps.com

OverviewTechnology PlatformsFastrax Technology PlatformsFastrax GPS receivers are based on chipsets from a few selected suppliers inorder to guarantee best possible features and functionalities at competitiveprices for its customers.Fastrax IT500 seriesFastrax IT500-series receivers are based on the MT3329 chip from Mediatek Inc.The IT500-series is very high performing with outstanding acquisition sensitivity andnavigation sensitivity as well as 10 Hz update rate and low power consumption. Inaddition to extreme sensitivity the receivers offers excellent navigation results evenin very demanding environments.Fastrax IT400 seriesFastrax IT400-series is the latest series of GPS modules added to Fastrax extensiveproduct range. The receivers are based on SiRFstar IV, GSD4e chips from CSR/SiRF. With extremely advanced power management and fast startup time combinedwith excellent performance, IT400-series is a ground-breaking solution forany portable application.Fastrax IT300 seriesAll receivers in the Fastrax IT300-series are based on the SiRFstarIII chipset, eitherGSC3e/LPx or GSC3f/LPx. The protocols and commands are available as NMEAand/or Sirf binary. The complete Fastrax 300-series has very high performance andlow power consumption which is proven to be a successful combination all overthe world.Fastrax IT03 seriesFastrax IT03-series of GPS receivers are based on the RF chip uN8021 and thebase band chips uN8130 from Atheros Communications. The receivers offer minimalpower consumption with on-board data logger, power saving interval mode andversatile programmability with a lot of free I/O’s and processing resources. It providesaccurate and configurable timing (1PPS), access to raw data such as code and carrierphase measurements and is thus suitable for varying expert needs.smartpositioning9/20107

Fastrax IT520and IT500Ultra sensitive!Simply the most sensitiveGPS receiver modulesThe most sensitive GPS receivers forultimate performanceFastrax IT520 and IT500 GPS receiver modules offerthe best performance and sensitivity among any GPSmodules. Both modules have same features andspecifications, like 14 days predicted A-GPS, up to10Hz update rate, amazing signal acquisition andrecord breaking navigation sensitivity. The only differenceis size. IT520 is the smallest module in theFastrax IT500 series of GPS receivers with a footprintof only 10.4 x 14.0 x 2.3mm while the IT500 hasFastrax Multiplatform footprint, which means that thatthe same hardware design can be used for FastraxIT300 modules as well.SensitivitySensitivity = “Minimum received signal strength that areceiver can work with”Fastrax IT520 and IT500 are built with the market-leadingGPS chip from Mediatek, MT3329. With cold startsensitivity of -148dBm it is possible to acquire satellitesignals and start navigating in places where competingmodules do not get even the first fix. Once the receivershave a fix, the ultimate navigation sensitivity of -165dBm ensures the satellite signals will be received evenin most dense and difficult urban areas.Very high sensitivity also compensates the possiblenegative effect of host system EMI, enabling postinstallationsin several additional applications.Assisted GPS (A-GPS) with two weeks ephemerisinformation makes the startup time to acquire a positioneven faster.IT520ActualsizeKey Features:IT500, compatible with Fastrax ITMultiplatform footprintIT520, size only 10.4 x 14.0 x 2.3mmLow power consumption:75mW@3.0VUltimate sensitivity:-148 dBm (acquisition)-165 dBm (navigation)10 Hz fix update rateA-GPS (14 days predicted ephemeris)Optional USB 2.0 connection (IT520U)Mediatek MTK3329Jammer detection and removalFlexible and low powerFastrax IT500 series receiver modules have internalhigh-efficiency switch mode regulators which enablea wide power range (+3.0…+4.2V) and power supplydirectly from Lithium Ion or Lithium Polymer batteries,without adding the cost of expensive external regulators.At +3.0 volt the power consumption is as low as75mW in full operation, 3mW in stand-by mode andonly 15uW in back-up mode.8 www.fastraxgps.comThe specifications in this document are subject to change without prior notice. Fastrax makes no warranties, either expressed or impliedwith respect to the information and specifications contained in this document. Performance characteristics listed in this document areestimates based on currently available firmware and do not constitute a warranty or guarantee of product performance.

GPS MODULESFastrax IT520and IT500Fastrax 500-series modules withintegrated antennaFastrax UP501 - more on page 14.Perfect trace with IT500 and 10Hz updaterate in roundaboutAcquisition and navigation sensitivity comparison ofIT500, Fastrax SW GPS and Fastrax main modulecompetitor.NMEA Manual for IT500-series of receivers can be requested from support@fastraxgps.com whilebrochure and technical interface description are found from:http://www.fastraxgps.com/products/gpsmodules/500seriessmartpositioning9/20109

Fastrax IT430Smallest availablecomplete GPS module withlow power consumptionUltra small!Next generation GPS nowFastrax IT430, based on new generation SiRFstarIV architecture and SiRFaware technology, offersa range of new benefits that speed the inclusion oflocation-aware features in battery operated consumerdevices. The complete Fastrax IT430 GPS module ispacked into a tiny casing for easy fitting into varioushandheld or other battery powered devices. FastraxIT430 features a miniature form factor of only 9.6 x9.6 x 1.85 mm, which makes it one of the smallestcomplete GPS modules available on the market. Withthe included TCXO, RTC and SAW filter, the amountof required external components is reduced to a minimum.Battery life is criticalFastrax IT430 is especially well suitable for batteryoperated devices using 1.8 V internal power regulation.The low-power GPS module consumes only 56mW at 1.8 V in full operation mode. With SiRFAwareit consumes only 500uA in average. The small sizeand low power consumption combined with ultra-highsensitivity, allows easy utilization in a variety of applications,including the smallest battery-operated consumerdevices.Key Features:Miniature size: 9.6 x 9.6 x 1.85 mmUltra high sensitivity:-147dBm (cold start)-163dBm (tracking)Low Power Consumption:56mW@1.8V500uA average power consumtionwith SiRF Aware48 channelsHost port configurable to UART,SPI or I2CAdvanced power modesActualsizeJammer detection and removal,up to 8 CW EMI sourcesSiRFstarIV, GSD4e GPS chipWith its new innovative standby mode, Fastrax IT430activates itself autonomously from time to time in orderto maintain awareness of its location at all times. As aresult, updated location information is available almostimmediately when activated, without compromisingbattery life.10 www.fastraxgps.comThe specifications in this document are subject to change without prior notice. Fastrax makes no warranties, either expressed or impliedwith respect to the information and specifications contained in this document. Performance characteristics listed in this document areestimates based on currently available firmware and do not constitute a warranty or guarantee of product performance.

Fastrax 300-SeriesGPS Receiver ModulesGPS MODULESFastrax IT430IT310IT300Fastrax IT310Fastrax IT300Key Features:• Very low power consumption:75mW @ 3.0V• Small form factor: 13.1 x 15.9 x 2.3 mm• Ultra High Sensitivity:-146dBm (cold start)-159 dBm (tracking)• Extremely Fast TTFFActualsizeKey Features:• Compatible with IT Multiplatform footprint• Ultra-High Sensitivity with SiRFstarIII-146dBm (cold start)-159 dBm (Tracking)• Very low power consumption:75mW @ 3.0V• Size 16.2 x 18.8 x 2.3 mm• Extremely Fast TTFFActualsizeWhy IT310?The advantage of Fastrax IT310 is the small size combinedwith very low power consumption. IT310 isbased on the proven and tested GSC3fLPx GPS chipfrom CSR/SiRF, enabling the low power consumptionduring acquisition and navigation: 75mWWhy IT300?The main benefit of Fastrax IT300 is the IT Multiplatformcompatible footprint. This allows customers to selecttwo different modules ( IT300 and IT500 ), with two differentfunctionalities in one form factor. This translatesto flexibility and cost-saving in any design.Fastrax 300-Series receivers with integrated antennaFastrax UP300(More on page 15)smartpositioning9/201011

Fastrax IT03Programmable, HighSensitive and Low PowerGPS Receiver ModulePerformance for savingsThe Fastrax IT03 features a 16Mbit Flash memory,which allows remote firmware updates, permanentoperation parameter changes via NMEA or iTalk 3and data logging as a standard feature. Fastrax IT03supports versatile programmability with iSuite 3 SDK,which results to reduced application costs when noexternal processor is required as the Fastrax IT03 isused as a host controller. See more of iSuite SDK onpage 22.Module for advanced useUltra-low, user configurable power managementmakes Fastrax IT03 one of the lowest power consuming,complete GPS receiver modules on themarket. Furthermore, the expert features like accurateand configurable timing, different coordinatesystems, availability of raw measurement data andmany other advantages make this module the mostintelligent GPS receiver on the market. See expertfeatures on next page.World of applicationsOffering industry-leading benefits in performance, size,power consumption, programmability and total cost ofproduct, the Fastrax IT03 receivers are ideally suitedfor both industrial tracking and navigation systems andbattery operated consumer products like sports accessories,handheld computers, asset tracking devices,vehicle navigation devices and mobile phones.Key Features:Programmable with iSuite SDKVery accurate time 20ns RMS(configurable pulse)Low power consumption– only 95 mW @ 2.7VSmall form factor:22 x 23 x 2.9 mmHigh sensitivity:-156 dBm (navigation)Built-in data loggerAtheros chipsetExtensive interface ports12 www.fastraxgps.comThe specifications in this document are subject to change without prior notice. Fastrax makes no warranties, either expressed or impliedwith respect to the information and specifications contained in this document. Performance characteristics listed in this document areestimates based on currently available firmware and do not constitute a warranty or guarantee of product performance.

GPS MODULESFastrax IT03ActualsizeIT03-SERIES EXPERT FEATURESVery accurate timing, 20ns accuracyConfigurable cable delayChangeable polarity of time pulseConfigurable length of time pulseEnables different coordinate systemsFor example MGRSOn-board data loggerEnables easy logging of position,speed, velocityAccess to Raw measurement dataCarrier phaseCode phasePseudorangeExtensive configurabilityProgrammabilityFunctions as host CPUManagement of radio modems,displays, LED’s, buttons, I/O’sCustom protocolssmartpositioning9/201013

Fastrax UP501The most sensitiveantenna moduleCan the best be improved?Fastrax UP501 is the successor of extremely popularUP500, with further improved sensitivity and powerconsumption, thanks to the latest generation MediatekMT3329 chip. Extremely sensitive UP501 can have afix even indoors when necessary, due to its extremelyhigh cold start sensitivity of -148 dBm. Performanceand ease of use make UP501 a reliable and simpleGPS solution for any device.Solid and simpleFastrax UP501 is specially designed to make applicationdesign easy. It eliminates the need for antennaselection and tuning, speeding up the time-to-marketfor the device. The integrated patch antenna of 18x 18mm provides very good performance, and it isalready tuned for a plastic enclosure. In order to supportstable mounting, there are built-in PCB-mountingflanges on the shield for firm soldering, to survive eventougher environments.Ultimate performanceFastrax UP501 enables extremely high navigation performancedue to the navigation sensitivity of -165dBm.This sensitivity can also be utilized on 10 Hz updaterate, making UP501 ideal also for motor sports applications.When a very fast fix is needed, Assisted-GPSwith 14-days predicted assistance can be used to furtherspeed up the fix time, without having to connectthe server for download every time.Very high sensitivity and internal jammer detectioncompensates the possible negative effect to host systemEMI, enabling post-installations in multiple applications.ActualsizeKey Features:Ultra high sensitivity:-148 dBm (Cold start acquisition)-165 dBm (Navigation)Low Power consumption:75 mW @ 3.0VUp to 10 Hz fix rateTiny form factor: 22 x 22 x 8mmEmbedded, pre-tuned 18 x 18 mmpatch antennaMediatek MT3329, 66 channel receiverPredicted A-GPS for 14 daysWAAS/EGNOS supportOptional internal back-upbattery (UP501B)Optional RS232 level serial port(UP501R)Jammer detection and removalOn-board high efficiency switch mode regulator andextensive supply range allow direct power supply fromLi-Ion or Li-Polymer batteries.Different variantsFastrax UP501 comes in few different variants: UP501Bwith an on-board backup battery, as well as UP501Rwith RS232 level serial port and back-up battery.14 www.fastraxgps.comThe specifications in this document are subject to change without prior notice. Fastrax makes no warranties, either expressed or impliedwith respect to the information and specifications contained in this document. Performance characteristics listed in this document areestimates based on currently available firmware and do not constitute a warranty or guarantee of product performance.

Fastrax GPS Modules withIntegrated Patch AntennasGPS ANTENNA MODULESFastrax UP501UP300Fastrax UP300GPS Antenna Module• Embedded GPS patch antenna• Connector and switch for optionalexternal antenna• Low power consumption:84 mW @ 3.3V• Ultra High Sensitivity with SiRFstarIIIGSC3e/LPx single chip receiver• External system connectorKey features:Size 19 x 27 x 7.2mmSensitivity-146 dBm (acquisition)-159 dBm (tracking)ActualsizeCable + connector available for Fastrax UP300 – see accessories on page 28.smartpositioning9/201015

Fastrax Antenna ModulesComparisonFastrax UP300Fastrax UP501TTFFCold start 32 s 33 sHot start 1 s 1 sSensitivity (dBm)Acquisition -146 -148Navigation -159 -165Power consumptionNavigating 85mW 75 mWBack-up state 45 uW

FastraxMultiplatformReceiversGPS receivers for several applicationsFastrax MP (Multiplatform) receivers are pin compatiblewith each other offering common form factor andmain functionality. The receivers offer very high sensitivity,low power consumption and excellent navigationperformance even in most demanding environments.Fastrax IT MP (Multiplatform) modules• Fastrax IT500• Fastrax IT300Benefits:Common footprintGPS MODULESAntenna Modules ComparisonFastrax Multiplatform ConceptOnly one hardware designOptimal receiver for each applicationFast Time To Market with LowDevelopment Cost (Development,testing and documentation costscan be shared among severaldesigns)2 UARTS, 1PPSHigh sensitivityLow power consumptionAll the MP modules work with NMEA protocol, whilebinary protocols are not compatible.In order to verify seamless change between modulesit is important that any Fastrax IT MP design is madeaccording to the Fastrax IT MP Application Note. TheFastrax IT MP Application Note can be downloadedfrom www.fastraxgps.com.Fastrax IT MPKey Features:• Two Pin Compatiblereceivers• Footprint:16.2 x 18.8 x 2.3mmActualsizesmartpositioning9/201017

How to choose the rightGPS receiver moduleFastrax IT500 seriesIT500CHOOSE IT500 SERIES FOR:Highest possible sensitivityLow power consumption10Hz fix rateA-GPS supportUSB 2.0 support (IT520U)Multiplatform footprint (IT500)Fastrax IT400 seriesFastrax IT300 seriesIT310ActualsizeIT300CHOOSE IT400 SERIES FOR:Smallest size (IT430)Lowest power consumption1.8V power supplyHigh sensitivityAlways hot startAdvanced power saving modesEmbedded extended ephemerisSiRFstar IV8 CW jammer removerSiRFAware for 500 µA avg. power consumptionCHOOSE IT300 SERIES FOR:Low power consumptionHigh sensitivityAdvanced power saving featuresMultiplatform footprint (IT300)Fastrax IT03 seriesIT03CHOOSE IT03 SERIES FOR:Embedded applicationsExpert requirements1PPS accuracy and pulse configurabilityDifferent coordinate systems, custom protocols etcData logging18 www.fastraxgps.comThe specifications in this document are subject to change without prior notice. Fastrax makes no warranties, either expressed or impliedwith respect to the information and specifications contained in this document. Performance characteristics listed in this document areestimates based on currently available firmware and do not constitute a warranty or guarantee of product performance.

HOW TO CHOOSEGPS receiver/antennamoduleHow to choose the rightGPS antenna moduleFastrax IT500 seriesUP501CHOOSE UP500 SERIES FOR:Highest sensitivityLowest cost10 Hz update rateA-GPSBack-up battery (UP500B)RS232 (UP500R)Stable mounting possibilitiesFastrax IT300 seriesUP300CHOOSE UP300 SERIES FOR:Switch for optional external antennaSystem connector and cableAdvanced power saving featuressmartpositioning9/201019

Fastrax Software GPSWhat is Fastrax Software GPS?A traditional GPS receiver consists of an antenna, an RFfront-end and a baseband IC. The baseband IC consistsof an application processor, some memory, anddedicated hardware for communication (UART, SPI) andsignal processing (correlators, acquisition engine).In addition to the traditional GPS receiver describedabove, there are also solutions on the market thatreduce the size and price of the receiver hardware bymoving parts of the software onto the host CPU. In suchapproaches, typically only the acquisition and trackingtasks are running on the GPS baseband IC, and thenavigation algorithms are run on the host CPU. Theseapproaches are usually referred to as measurementfront end receivers.Contrary to a traditional GPS receiver or a measurementfront end, Fastrax Software GPS performs all GPS functionalitiesin software on an already existing CPU withoutthe need of any GPS specific IC. This includes signalcorrelation, - acquisition and – tracking as well as pseudorangecalculations, navigation and final PVT output.FFT Acq Correlator API iCore TM SW Corr20 www.fastraxgps.com

Software GPSBenefits with Fastrax Software GPSCost & FlexibilityCost is significantly reduced as required silicon area isminimized in comparison to any other available GPSsolution.Flexibility is unique with Fastrax Software GPS. By usinglatest available radios with Fastrax Software GPS makesthings really interesting. The receiver supports GPStoday but can be configured to receiver other GNSSsignals in the future as well. A multiband GNSS receivercan thus be implemented with a fraction of the cost ofexisting conventional multiband receivers.Key Features:Lowest cost GPS solutionLowest possible energy/fix required.Easy to optimize and adjust to availableresources and signal availabilitySupport for GPS, Software upgradeableto new GNSS systemsNon real time requirement for signalprocessingLow power consumptionAnother truly unique feature with Fastrax SoftwareGPS is that the power consumption is typically 30mJ/fix, which is equivalent of more than 60.000 fixes froma single coin cell battery. This is achievable as FastraxSoftware GPS receiver needs only to be on as long asthe GNSS signal is received. In urban canyons 100ms istypically enough for good performance and in areas withgood visibility it can be even shorter.Record Breaking SensitivityFastrax Software GPS enables also integration timesfar longer than conventional receivers and thus recordbreaking acquisition sensitivities can be achieved. Thesoftware architecture is also very flexible in terms ofnumber of channels and number of correlator fingersused, which can be adjusted and optimized accordingto application specific requirements. With Fastrax SoftwareGPS it is additionally straightforward to implementmultipath mitigation and to detect and eliminate interferenceof CW (continuous wave) type of signals.Software GPS applicationsSince Fastrax Software GPS receiver is very flexibleand fundamentally different from a conventionalreceiver, some new and exciting applications can beimplemented. A traditional receiver needs to be on continuouslyduring normal operation albeit some receivershave implemented power saving schemes wherethe radio is turned on and off. However, fundamentallya traditional receiver needs continuous operation forreal-time code correlation. This means that a traditionalreceiver must be on for 8s for a warm start and 40s fora cold start, depending on the availability of ephemerisbefore a fix can be calculated. In terms of power consumptionit means anything between 600mJ to 3000mJto get one fix.Fastrax Software GPS on the other hand can easily beused for a Push-to-Fix (P2F) type of solution where theGNSS signal is recorded with a time stamp and storedfor post processing. The radio can be turned off immediatelyafter the signal is captured. A cold start with atraditional low power receiver consumes thus 100 timesmore power than a Cold start using a software P2Fsolution.A P2F type of solution can be used in many applicationswhere real-time navigation is not required. Sometypical examples are low power data loggers and digitalcameras.Available evaluation platformAt the moment Fastrax Software GPS can be demonstratedby using Fastrax IT910 USB stick containingan RF chip, CPU and a 1Gbit NAND Flash memory fordata storage. It includes also a rechargeable Li-Ion batteryand a RTCC for maintaining clock and calendar.The IT910 USB stick can be configured for autonomouslogging at desired logging rates with an easyto use GUI or it can be operated manually by simplypushing a button. The actual positions are finally calculatedautomatically by the PC software once the USBstick is connected to the PC or server.smartpositioning9/201021

iSuite TM 3 SDKSoftware Development Kit forEmbedded GPS Applications inIT03-Series of receiversiSuite 3 SDK is a complete software developmentenvironment for application specific customization andprogramming of Fastrax IT03-Series GPS receivers.The main advantages are flexibility and full control ofthe application as well as miniature size, fast time tomarket, very low power consumption and low cost ofownership as no additional microcontroller is neededin the end applications. Suitable target segmentsare applications with special requirements like customprotocols and coordinate systems or access topseudoranges and carrier phase data. Other suitableapplications are asset tracking, person tracking andrecreation applications where miniature size, lowestpossible power consumption and excellent sensitivityare key requirements.Typical iSuite TM 3 SDK ApplicationsiSuite 3 SDK is used in a variety of different applications.The applications are often small size, high volumesconsumer application like speed camera devices,Bluetooth positioning devices, sports devices or antitheftasset tracking devices. In such applications theinternal microcontroller is used to manage GSM/GPRSmodems, Bluetooth modules, LED’s, displays, buttons,microphones, POI storage etc. The iSuite 3 SDKis also often used for more special requirements suchas geo-fencing, integrating proprietary communicationprotocols, changing coordinate systems, accessingcarrier phase data and pseudoranges or 100Hz postprocessed position updates.Develop your own applicationiSuite 3 SDK is used to develop customer specificapplications that are executed on the Fastrax IT03-series of GPS receivers. The customer applicationsoftware can process both raw and calculated positiondata generated by the iSuite 3 GPS Navigation software.The application software can also communicatewith other devices with standard and customer specificcommunication protocols. The Fastrax IT03 receiverscan also be used to do other programmed tasks triggeredeither internally or externally. These applicationscan utilize the on chip memory, flash memory file systemfor data and software code storage in addition toaccess the various I/O lines on the Fastrax IT03-seriesof GPS receiver. The receivers provide enough memoryand bandwidth for even complex user tasks.iSuite TM 3 SDK is now more powerfulthan everiSuite 3 SDK is the only true embedded, real time GPSSoftware Development Environment! Spare CPU processingcapacity and extensive I/O’s of Fastrax IT03and Fastrax IT03-02 OEM GPS receivers can be usedfor custom purposes.CPU available foruser applicationCode executedfrom RAM 1)Code executedfrom Flash 1)Free RAM memoryIT03/16Free program codeand constant datamemory on Flash 2) 1082kBytesIT03-0241% of total CPU cycles free4.8 Dhrystone MIPS0.8 Dhrystone MIPS37.4 kBytes + 10.7 kBytes(Divided into X and Y memory spaces)1082kBytesNote 1): 100% of the CPU can be allocated to user application by temporarily suspending the GPS functionality. Note 2): These are minimumvalues. Available program code space can be increased by leaving out unused system features while compiling user application. Systemresources are based on currently available iSuite firmware version. Available resources are subject to change without prior notice.22 www.fastraxgps.com

iSuite 3 SDKHardware Platforms for applicationdevelopment with iSuite TM 3 SDKEvaluation Kit with appropriate IT03-Series applicationboard. The hardware enables easier debugging andtesting of receiver software and access to all interfacesignals as well as seamless platform to platform transitionof the application code and thus your valuableinvestment in software development is protected.IT Application BoardATHEROS COMMUNICATIONSiSuite TM 3 SDK Includes:iSys Real Time Operating SystemiSys Real Time Operating System offers true multitaskingand a 100% control of the application whileiTalk protocol offers effective synchronized messagequeues. Thus programming challenges of multitaskingand data sharing environment are already solved bythe operating system.Toolkits for controlling your deviceiSuite 3 SDK Toolkits for controlling your device canbe used to enhance the capabilities further. Optionaltoolkits are available for controlling wireless modems,simple keyboards, LCD displays and other externalsensors and peripheral devices. Toolkits are deliveredwith complete source code and function either as suchor as reference implementations.• iSuite 3 Software development environment• New iSuite Builder IDE• iSysTM Portable Real Time Operating System• GPS core software, navigation libraries withcontrol and support API’s• System libraries and device drivers withsource code• Protocol libraries with source code includingiTalk 3 and NMEA.• Full on-line documentation• Support for Windows based development,debugging and testing using Microsoft ® VisualStudio ® .NET 2003•Documentation and Training• 2 days optional training and hands-on programmingsessions are available.• Full On-line documentation with search facilitiesmakes using the SDK easy.For more information, please visit iSuite SDKDevelopers site: http://support.fastraxgps.com/smartpositioning9/201023

Fastrax MiniEvaluation KitEasy evaluation of Fastrax receiversThe Fastrax Mini Evaluation Kit is equipped with a 40pin socket for Fastrax IT(nn) and UP501 ApplicationBoards and a JST system connector for FastraxUP300 antenna modules. Easy module evaluation ofthe different GPS receivers can be done by simplychanging the application boards or by connecting theUP300 and cable to the system connector.The Fastrax Mini Evaluation kit is furthermoreequipped with two (mini-B) USB connectors, areset switch and a programming switch for firmwareupgrades. PPS signal is available from a pin headerand the general I/O lines can be probed from a 40-pinsocket connector if needed. The GPS antenna signalis obtained by connecting an active antenna to theMCX rf connector of the Application Board. TheFastrax UP300 and UP501 receivers do not need anexternal antenna as they are already equipped with aninternal patch antenna.For all Fastrax IT GPSreceiver modulesFor Fastrax UP300 and UP501 OEMGPS antenna modulesFastrax provides one USB cable in the sales package.The USB needs drivers to be installed on the PC. Thisdriver is included in the sales package on a CD and itcan also be downloaded from Fastrax support pages.Evaluation softwareSuitable PC software are Fastrax GPS WorkBenchor SirfDemo for Sirf binary. The SirfDemo can berequested from support@fastraxgps.com while theFastrax GPS WorkBench can be downloaded from:http://www.fastraxgps.com/support/Mini-B USBconnectorJST system connectorfor Fastrax UP30024 www.fastraxgps.comThe specifications in this document are subject to change without prior notice. Fastrax makes no warranties, either expressed or impliedwith respect to the information and specifications contained in this document. Performance characteristics listed in this document areestimates based on currently available firmware and do not constitute a warranty or guarantee of product performance.

EVALUATION TOOLSFastrax MiniFastraxApplication BoardsApplication andEvaluation boardsFastrax IT(nn) Application BoardsFastrax has developed Application Boards for allFastrax IT(nn) modules and for the UP501 GPS antennamodule in order to make evaluation easier. The ApplicationBoards are connected to the Fastrax Evaluationkit or the Fastrax Mini Evaluation kit with the on-board40 pin system connector. The application boards arealso equipped with a MCX antenna connector for theexternal active antenna.For Fastrax Evaluation kitFor Fastrax Mini Evaluation kitEach Application Board is also a reference design forits appropriate Fastrax IT(nn) module and thereforeeach BoM and design layouts are described in detail inthe Technical Interface Description of each module.smartpositioning9/201025

FastraxTrack & TracePlatformThe Fastrax Track&Trace platform offers hardwareand technology for asset tracking applications allowingcompanies to focus on providing the tracking serviceand not spending time and resources on devicedevelopment. The uTrace03e can be used either as astand-alone tracking device in a plastic enclosure withbattery or connected to a motherboard as a part ofmore complex application. The software is customizableand Fastrax Track&Trace Server can be used forevaluation and development purposes.BenefitsAn easily customizable tracking device enables fasttime to market without need for extensive engineeringwork.The integrated GPS and GSM antennas provide highquality global coverage for GPS and GSM.Ability to easily and extensively modify the trackingdevice software allows application specific know-howto be implemented in the tracking device itself.ApplicationsThe uTrace03e module can be used as a componentconnected to a motherboard as a part of more complexsystem or as a stand-alone tracking unit in an enclosurewith customizable membrane. Due to its costeffective,integrated design uTrace03e is ideal even forapplications where long battery life is required.Track&Trace Hardware SolutionsuTrace03e Circuit BoardCircuit board dimensions: 55 x 90 x 10 mmLow power sleep mode: 22 uA @ 3.8VDCIntegrated GPS and quad band GSMincluding antennasShock sensor3D accelerometerLi-ion battery managementOn-board connectors:• USB, audio, IO, external GPS antenna• 80-pin extension connectoruTrace03eEnclosed UnitKey featuresEnclosure dimensions:62 x 100 x 25 mm1050 mAh li-ion battery in enclosed unitThe uTrace03e module inside.Customizable membrane user interface withthree LED’s and three buttons.Accessories• External 12V to mini-USB power converter forfixed installations.• Internal 12V power adaptor with optional 350mAhbackup battery.26 www.fastraxgps.com

TRACK & TRACEHardware andSoftware solutionsTrack&Trace Software SolutionsSoftware for trackingThe standard SW in the uTrace03e includes severalfunctions required in normal tracking applications.It is stable and can be remotely troubleshooted. Thesoftware is easy to customize according to the userapplication.Smart event based reporting logic can be used to drivedown communication cost and excess amounts ofdata to the server:• Start / stop of movement• Traveled distance• Heading change• Geofence or route adherence breach using theadvanced geofencing library• Detection of G-forcesThe event settings can be changed over the air andusing the optional SW development tools new eventscan be created.Advanced featuresThe uTrace03e SW provides advanced geofencingpossibilities: geofences can be circular around a singlepoint, polygons built from multiple points or multiplepoints connected to form a route to provide routeadherence. The system can be updated over-the-airand also troubleshooting can be done remotely. Thetroubleshooting commands are usable through SMSand TCP/HTTP, and with a single command the uTracesoftware will download a new firmware image and verifythe image integrity.Advanced logging systemDifferent events can be logged into an internal event logand later uploaded to an FTP server or extracted witha USB connection. The log is able to store over 20000events. Depending on the amount of logged events,the storage space can hold events for several weeks.The oldest events are automatically erased when thestorage space runs out. Configuring the length of thelog and adding new events can be done by simplemodifications to the source code.Flexible communicationThe most cost effective protocol: SMS, UDP, TCP, canbe easily selected depending on the application type.FTP and HTTP protocols are available for data communicationwith a server.Customisable local user interfaceThe membrane appearance is easily customizable andthe behaviour of the buttons and LED’s can be modifiedfor the particular application.Coming up in 2011…Assisted GPS (A-GPS) and Cell ID location.smartpositioning9/201027

AccessoriesIn order to make design, sourcing and manufacturing easier Fastrax offers some accessoriesthat can be used together with the GPS receiver modules. The accessories are sold onlytogether with modules.Fastrax UP300 system cable and mother board connectorThe 10cm system cable including system connectorson both ends is designed to be used with the FastraxUP300 GPS antenna receivers. Fastrax offers also themother board system connector separately in order tomake sourcing even easier. Detailed information aboutthe system cable and the mother board connector canbe downloaded from www.fastraxgps.com or by contactingany Fastrax distributors, sales persons or bye-mailing support@fastraxgps.comFastrax IT03-02 AMP 4-353512-0 mating connectorThe AMP mating connector is used for the systemconnector on the Fastrax IT03-02 GPS receiver.28 www.fastraxgps.comThe specifications in this document are subject to change without prior notice. Fastrax makes no warranties, either expressed or impliedwith respect to the information and specifications contained in this document. Performance characteristics listed in this document areestimates based on currently available firmware and do not constitute a warranty or guarantee of product performance.

AccessoriesFastrax Order CodeFastraxOrder CodesFastrax order codes define GPS receivers,evaluation tools and accessories as well ashardware and software versions.General naming conventionFastrax GPS receivers are named: xxxxxx-sssr-yyy-bbbb:Where xxxxxx = Module name (e.g. IT430, IT520,IT300, IT0316, UP501)sss = Firmware version (e.g. 325, 350(Sirf), 331, 341 (iTalk))r = Build variantyyy = Firmware specific custom code(e.g. STD = standard)bbbb = Material codeExample codes:IT0316-331E-STD-3278IT03S = Fastrax IT03, firmware3.31.E (6151) - standard conf., BoM 3278.IT300-324S-STD-1892 = Fastrax IT300, firmware3.5.0 (Sirf), standard conf., BoM 2861.Fastrax order codesGPS ModulesFastrax 500-series:Fastrax 400-series:Fastrax 300-series:Fastrax 03-series:IT520-130S-ITX-XXXXIT500-130S-ITX-XXXXIT430-401S-SGT-XXXXIT300-350S-STD-XXXXIT310-350S-CAR-XXXXIT0316-331E-STD-XXXXIT3216-331E-STD-XXXXGPS Modules with integrated AntennasFastrax 500-Series:Fastrax 300-Series:Evaluation ToolsFastrax Mini Evaluation kit: MVKUP501-130S-ITX-XXXXUP501B-130S-ITX-XXXXUP501R-130S-ITX- XXXXUP300-350S-CAR-XXXXApplication Boards = AP + module code:APU + antenna module codeAP430, AP430UAP300, AP310AP03/16AP520, AP500, APU501, APU501B, APU501RAll Evaluation kits and Application Boards are supplied withthe latest available firmware versions by default unless otherwiserequested.AccessoriesCable for UP300:CBL-JST-2351Connector for UP300 cable:CON-JST-1852Mounting Clip for UP102:CLIP-UP102AMP system connector for IT0302: AMP 4-5353512-0smartpositioning9/201029

GPS RECEIVER MODULESModule IT500 IT520 IT430 IT300GeneralL1 frequency, C/A code (SPS)Channels 22 track + 66 acq. 22 track + 66 acq. 48 20Update rate up to 10 Hz up to 10 Hz 1 Hz 1 HzAccuracyPosition 2.7 m (CEP 95) 2.7 m (CEP 95) 2.5 m (CEP 50) 2.7 m (CEP 95)Velocity 0.1m/s 0.1m/s 0.01 m/s 0.1m/sTime 50ns RMS 50ns RMS 1µs 1µsTime-to-first-fix (TTFF), typicallyCold start 33s 33s 35s 32sWarm start 33s 33s 35s 32sHot start 1s 1s 1s 1sSensitivityAcquisition (cold start) -148 dBm -148 dBm -147 dBm -146 dBmRe-acquisition -160 dBm -160 dBm -160 dBm -157 dBmNavigating -165 dBm -165 dBm -160 dBm -159 dBmPower drainNavigating 75mW typ. 75mW typ. 56/68mW 75mW typ.Backup state 15uW 15uW 36uW 18uW typ.Operating voltageMain supply +3.0V...4.2V +3.0V...4.2V +1.8V +3.0V..3.3VBackup supply +2.0V...4.2V +2.0V...4.2V -- +1.5V..3.3VProtocol NMEA 0183 NMEA 0183 NMEA 0183, OSP binary NMEA, Sirf binaryBaud rate 9600 (configurable) 9600 (configurable) 4800 (configurable) 4800/9600 (configurable)Chipset Mediatek MTK3329 Mediatek MTK3329 SiRFstar IV (GSD4e) SiRFstar III (GSC3e/LPx)Dimensions 16.2 x 18.8 x 2.3 mm 10.4 x 14.0 x 2.3 mm 9.6 x 9.6 x 1.85 mm 16.2 x 18.8 x 2.3 mmWeight 1.5 g 0.7 g TBD 1.4 gOperating temperature -40C...+85C -40C...+85C (1) -40C...+85C (1) -40C...+85C (1)Storage temperature -40C...+85C -40C...+85C -40C...+85C -40C...+85CHW options IT520U (USB 2.0) Signature (default) or Basic firmwareoptionsMemory size 4 MBit 4 MBit 8 MBitAntenna External, passive or active External, passive or active External, passive or active External, passive or activeAntenna input LGA pad, 50 ohm LGA pad, 50 ohm LGA pad, 50 ohm LGA pad, 50 ohmAntenna bias Same as VDD Same as VDD Antenna bias supply input Same as VDDI/O ports30 contact LGATwo asyncronous serial ports1PPS outputAntenna detector status pins24 contact LGATwo asyncronous serial ports1PPS outputAntenna detector status pins28 contact LGAone host port: UART, SPI or I2COn/OFF control input1PPS outputantenna bias supply inputdedicated I2C port for externalsensors30 contact LGATwo asynchronous serial ports1PPS output8xGPIO(one interrupt capable)(1) Operates down to -40degC, all specifications are not guaranteed below -30degC30 www.fastraxgps.comThe specifications in this document are subject to change without prior notice. Fastrax makes no warranties, either expressed or impliedwith respect to the information and specifications contained in this document. Performance characteristics listed in this document areestimates based on currently available firmware and do not constitute a warranty or guarantee of product performance.

SPECIFICATIONSOEM GPS ReceiversGPS ANTENNA MODULESIT310 IT03 UP501 UP30020 12 22 track + 66 acq. 201 Hz up to 3 Hz up to 10 Hz 1 Hz2.7 m (CEP 95) 2.7 m (CEP 95) 2.7 m (CEP 95) 2.7 m (CEP 95)0.1m/s 0.1m/s 0.1m/s 0.1m/s1µs 20ns RMS 50ns RMS 1µs32s 35s 33s 32s32s 34s 33s 32s1s 4s 1s 1s-146 dBm -142 dBm -148 dBm -146 dBm-157 dBm -149 dBm -160 dBm -157 dBm-159 dBm -156 dBm -165 dBm -159 dBm75mW typ. 95mW typ. 75mW typ. 84mW typ.18uW typ. 20uW (sleep mode) 15uW 18 uW typ.+3.0V..3.6V +2.7V..3.3V +3.0V...4.2V +3.0V..3.6V+1.5V..3.6V - +2.0V...4.2V +1.5V..3.6VNMEA, Sirf binary NMEA, iTalk NMEA 0183 NMEA, Sirf binary4800/9600 (configurable) 4800 (configurable) 9600 (configurable) 9600 (configurable)SiRFstar III (GSC3f/LPx) uN2110 + uN8021 Mediatek MTK3329 SiRFstar III (GSC3f/LPx)13.1 x 15.9 x 2.3 mm 21.6 x 23.3 x 2.6 mm 22.0 x22.0 x 8.0 mm 19.0 x 27.0 x 7.2 mm0.9 g 2.7 g 9.0 g 9.1 g-40C...+85C (1) -40C...+85C -40C...+85C (1) -40C...+85C (1)-40C...+85C -40C...+85C -40C...+85C -40C...+85CIT0302 (replacement for IT02)UP501. UP501B (internal backupbattery)UP501R (RS232 level serial port+ battery)4 MBit 16MBit 4 MBit 4 MBitExternal, passive or active External, passive or active Integrated patch 18.4 x 18.4 mm Integrated patch 18.4 x 18.4 mm,connector & switch for external ant.LGA pad, 50 ohm LGA pad, 50 ohm - Hirose U.FL-R, 50 ohmSame as main supply VCC Same as VDDRF - Same as VDD36 contact LGATwo asynchronous serial ports1PPS output2 x GPIOExternal clock inputTimesync inputWakeup interrupt input37 contact LGATwo asynchronous serial ports22-pin GPIO (Shared functionality)2 x SPI-interfaceDual pulse measurement inputs1PPS output2 x Pulse measurement timers2 x Capture timers2 x Clock inputsMMC (Master) connection6 contact pin solderingTwo asynchronous serial portsMain & Back-up supply1PPS output8-pin cable connectorOne asynchronous serial portMain & Back-up supply1PPS outputRESET inputUPDATE input (re-programming)smartpositioning9/201031

Fastrax GPS Receiver ModulesFastraxIT400-seriesFastraxIT500-seriesFastraxIT300-seriesFastraxIT03-seriesFastrax IT MPMultiplatform compatible modules)FastraxIT430FastraxIT500FastraxIT300FastraxIT03Programmablewith iSuite SDKFastraxIT520FastraxIT310FastraxUP501FastraxUP300Valimotie 7, FI-01510 Vantaa, FINLANDwww.fastraxgps.com