Radiation board - Libelium

More documents

Recommendations

Info

Maintenance8. MaintenanceIn this section, the term “Waspmote” encompasses both the Waspmote device itself as well as its modules and sensor <strong>board</strong>s.••Take care with the handling of Waspmote, do not drop it, bang it or move it sharply.••Avoid putting the devices in areas of high temperatures since the electronic components may be damaged.••The antennas are lightly threaded to the connector; do not force them as this could damage the connectors.••Do not use any type of paint for the device, it may harm the functioning of the connections and closing mechanisms.7.-26- v4.1
Disposal and recycling9. Disposal and recyclingIn this section, the term “Waspmote” encompasses both the Waspmote device itself as well as its modules and sensor <strong>board</strong>s.••When Waspmote reaches the end of its useful life, it must be taken to a recycling point for electronic equipment.••The equipment has to be disposed on a selective waste collection system, different to that of urban solid waste. Please,dispose it properly.••Your distributor will inform you about the most appropriate and environmentally friendly waste process for the usedproduct and its packaging.-27- v4.1
Page 1 and 2: Radiation boardTechnical Guidewaspm
Page 4: General1. General1.1. General and s
Page 7 and 8: Waspmote Plug & Sense!Figure 4: Was
Page 9 and 10: Waspmote Plug & Sense!2.6. Program
Page 11 and 12: Waspmote Plug & Sense!2.10. ModelsT
Page 13 and 14: Hardware3. Hardware3.1. General des
Page 15 and 16: Hardware3.3. Electrical characteris
Page 17 and 18: Sensors4. Sensors4.1. Radiation sen
Page 19 and 20: SensorsMoreover, the Geiger-Müller
Page 21 and 22: Board configuration and programming
Page 23 and 24: Board configuration and programming
Page 25: Documentation changelog7. Documenta

Radiation board - Libelium

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?