PMD-1208LS User's Guide - LArTPC DocDB

PMD-1208LS User's GuideSpecificationsRange±20V 5.1±10V 6.1±5V 8.1±4V 9.1±2.5V 12.1±2V 14.1±1.25V 20.1±1V 24.1Range±10V 4.0Table 4-1. Accuracy, Differential ModeAccuracy (LSB)Table 4-2. Accuracy, Single-Ended ModeAccuracy (LSB)Table 4-3. Accuracy Components, Differential Mode - All values are (±)Range % of Reading Gain Error at FS (mV) Offset (mV) Accuracy at FS (mV)±20V 0.2 40 9.766 49.766±10V 0.2 20 9.766 29.766±5V 0.2 10 9.766 19.766±4V 0.2 8 9.766 17.766±2.5V 0.2 5 9.766 14.766±2V 0.2 4 9.766 13.766±1.25V 0.2 2.5 9.766 12.266±1V 0.2 2 9.766 11.766Table 4-4. Accuracy Components, Single-Ended Mode - All values are (±)Range % of Reading Gain Error at FS (mV) Offset (mV) Accuracy at FS (mV)±10V 0.2 20 19.531 39.531Analog output sectionParameter Conditions SpecificationD/A converter typePWMResolution 10-bits, 1 in 1024Maximum output range0 -5 VoltsNumber of channels2 voltage outputThroughput Software paced 100 S/s single channel mode50 S/s dual channel modePower on and reset voltageInitializes to 000h codeMaximum voltage (Note 3) No LoadVs1mA Load0.99*Vs5mA Load0.98*VsOutput drive Each D/A OUT 30mASlew rate0.14V/mS typNote 3:Vs is the USB bus +5V power. The maximum analog output voltage is equal to Vs at noload.V is system dependent and may be less than 5 volts.4-2