solvoprint PVC sand CA

printdifferent
� General Information
solvoprint PVC sand CA
Technical Information
� approx. 220 µm clear PVC film
� transparent, embossed surface (hardcoat)
� “backprint” film; mirrored printing
� Color Alliance certified CA coating for standardised printing
� good scratch resistance
� dimensionally stable
� Areas of Application
� suitable for solvent and eco solvent inks
� for "display panel" production for using in Pop-Up display systems, exhibition construction etc.
� specially designed for laminating with strengthening film filmolux easy panel
� suitable for indoor applications
� Processing & Handling
� please notice Handling- and Storage Conditions in our catalog or visit our homepage www.neschen.de
� to avoid fingerprints, usage of cotton gloves is recommended
� for protective purpose usage of Neschen Protective Laminates is recommended (ensure adequate drying
before lamination) – min. drying time of 24 hours is recommended.
� storage is best to be done in the original case
� smooth side is print side
� PVC is heat sensitive; we recommend a maximum printing heat of 35° C and to turn off the pre-heater
(depending on the printer)
� Advantages / Special Features
� bright colours with high brilliance and photorealistic print quality
� very good roll attributes and flatness
� trouble free material feed through the printer (unlike direct printable panel media)
� “print media and protection film in one product”
� due to CA coating nearly no color differences between the CA media for display applications
� possibility of using the same ICC profiles within a family of CA Media
� B1 fire certificate only in combination with filmolux easy panel
� part of Neschen´s Display Graphics Solutions (DGS)
� for more information see the latest Neschen compatibility list (at www.neschen.de)
Version: 03/2011 Copyright Neschen AG, 2011 1 of 2
www.neschen.de
Published information concerning our products is based upon practical knowledge and experience. Purchasers should independently
determine, prior to use, the suitability of each material for their specific purpose. The purchaser must assume all risks for any use,
operation and application of the material. We are liable for damage only upon the amount of the purchase price under exclusion of
indirect and accidental damage. All information given serves only to describe the product and is not to be regarded as assured
properties in the legal sense. Specifications subject to change without notice, errors and omissions excepted.

� Technical Data
� Carrier:
solvoprint PVC sand CA
Technical Information
Carrier material: PVC- Film, transparent, sandstructured
Thickness [µm]: 220 ± 25 approx. 8.7 mil
Weight [g/m2]: 290 ± 20
Breaking force [N/15mm]: lengthwise: crosswise: > DIN EN ISO 527,
> 150 140
50 mm/min
Elongation at tear [%]: lengthwise: crosswise > DIN EN ISO 527,
> 200
Tear resistance [N/mm2]: lengthwise:
> 40
� Coating:
Base:
� More informations:
storage conditions:
material durability [months]:
temperature resistance:
Version: 03/2011 Copyright Neschen AG, 2011 2 of 2
www.neschen.de
Published information concerning our products is based upon practical knowledge and experience. Purchasers should independently
determine, prior to use, the suitability of each material for their specific purpose. The purchaser must assume all risks for any use,
operation and application of the material. We are liable for damage only upon the amount of the purchase price under exclusion of
indirect and accidental damage. All information given serves only to describe the product and is not to be regarded as assured
properties in the legal sense. Specifications subject to change without notice, errors and omissions excepted.
210
50 mm/min
crosswise: > 35 DIN EN ISO 527,
50 mm/min
glossy, transparent Special- Coating
All tests were performed in accordance with 23/50-2, DIN 50014.
18° to 25°C / 60° to 80° F; 40 to 65% relative humidity
18 months
-30 to +50°C / -20 to 120°F affixed to aluminium