Microfluidic Test Station (S-Station STS 200) - A*Star

Flow control GUIDigital image processing GUIGeneral SpecificationsMicrofluidic Test StationDimension (L × W × H)300 mm × 320 mm × 340 mmWeight8.5 kgWorking Temperature 0°C to 70°CVoltageNo. of Syringe Pump 2Syringe SizeFlow RateMaximum Linear ForceInterface to Computer100–240 V ~ 0.6A (50–60 Hz)Syringe Pump1.0 ml to 60 ml0.73 µl/hr ~1699 ml/hr18 lbs (maximum speed)35 lbs (minimum speed)RS-232 or USB to RS-232 adapterDigital MicroscopeResolution 1280 × 1024Video Frame Rate 15 f/s @ 1280 × 1024Magnification 60× or 180×IlluminationInterface to ComputerNo. of Fluidic Probes SuppliedChip Size (L × W)Chip ThicknessMaximum Flow PressureAdjustable Range of X-Y StageContact UsSIMTech Microfluidics Foundry71 Nanyang Drive, Singapore 638075Tel: +65 6793 8383 | Fax: +65 6791 6377Email: smf_enquiry@SIMTech.a-star.edu.sgWebsite: http://smf.SIMTech.a-star.edu.sgUpper and lower LEDUSB type-BChipholder and X-Y Stage3 (additional fluidic probes can be purchased)40 mm × 15 mm to 100 mm × 100 mm1.6 mm to 3.0 mm6 bar70 mm × 50 mm05/2012