Einböck GmbH & CoKG Schatzdorf 7 A-4751 Dorf ... - Euro Globtrade

More documents

Recommendations

Info

PNEUMATICSTAR When the GRASS-MANAGER is equipped with apneumatic seeder it turns into aPNEUMATICSTAR. This PNEUMATICSTAR airseeder, to which re-consolidation rollers can be added, is the perfect tool for oversowing, aftersowing, undersowing, intercrop sowing or new sowing. It lets you sow all the standard seeds and their mixtures up to asize of 5mm. Depending on the amount of seed and the sowing speed you can set it to anywhere from 1kg to 300kg per hectare in asimple adjustment step. The seed container comes in versions of 227 litre or300 litre capacity. Astirring shaft will keep the seed mix from de-mixing and from forming bridges in the container. The flexible drive shaft flanged to the rubber support wheel transfers the power to an infinitely variable oil-immersed gearbox, which inturn powers the sowing and the stirring shafts by means of achain drive. The seed roller conveys the seed to the eight divided and separated outlets via PVC seed hoses to the baffle plates from where itisexactly distributed to the entire sowing width. Since the seeds are expelled pneumatically the wind factor plays amuch less important role than with mechanical seeders. The air pressure conveying the seeds to the baffle plates is produced either by an electrical, hydraulic, shaft-driven fan oraseparate fan attachment. The technical data listed here refer to grass seed that istobe sown at avolume of 40kg/ha ataspeed of 10km/h. If alarger amount is required, if the speed should be increased or if larger, heavier seed (grain) is to be used we ask you to contact ussowecan arrange the best possible combination of seeding wheel and fan type. The electrical fan package comes with aseparate set of cables and acontrol unit that can easily be mounted inside the tractor cabin. This will allow you to switch the fan unit on or off as required.
Additional standard equipment PNEUMATICSTAR Stirring shaft Own seeding wheel per hose Turning plate +turning pan Cable with abig cross-section for the tractor side for machines with electronic fan Variable quantity setting through bottom drive and continuously adjustable oil bath gearing Distributions plates with stray cover Flexible drive shaft Metering roller with large cogging Metering roller with fine cogging Monitor Window +Emptying opening •3.00 mmachine equipped with 1electric fan, 12volt 13 ampere necessary •6.00 mmachine equipped with 2electric fans, 12volt 26 ampere necessary •9.00 +12.00 mmachines with mechanical fan and cardan shaft The machines are completely mounted (a few mounting steps may be necessary due to transport modifications based on size of implement) Operating Instructions Additional optional equipment PNEUMATICSTAR Stronger frame in order to mount rolls afterwardsorfor contractors and communities Cable with abig cross-section for the tractor side (for further tractors) Hectare counter (mechanical) Larger tank volume Mechanical fan onmotor instead of electronic fans Mechanical fan with cardan shaft instead of2 electrical fans Mechanical fan without cardan shaft instead of2electrical fans Hydraulic fan (requirement: load sensing system) instead ofstandard fan Second electronic fan for 3.00 mmachine Retaining plate for heavy seed types Mechanical shaker for cohering seeds Steps to access filling opening Electronic control module “ETRONIC“ (control of the electricalseed distribution,fan, sowing shaft, air stream, tank-level and more)
Page 1 and 2: EinböckGmbH & CoKG Schatzdorf 7 A-
Page 3 and 4: Standard equipment GRASS MANAGER /
Page 5 and 6: INCREASING FODDER QUALITY STOPPING
Page 7 and 8: Warning signs with lights are avail
Page 9: Technical Data GRASS-MANAGER: Type/
Page 13 and 14: The control unit is easily mounted
Page 15 and 16: GRASSLAND IMPROVEMENT SOWING, WORKI

Einböck GmbH & CoKG Schatzdorf 7 A-4751 Dorf ... - Euro Globtrade

Create successful ePaper yourself

Delete template?

Save as template?