User's Manual - AirLive

More documents

Recommendations

Info

IEEE 802.1xAccess Client1RADIUSClient3RADIUSServer(1) Client requests to login thenetwork.(2) Login with username,password.3.2.1.3 802.1x Setting-CertificationParameterDescriptionAuthentication Type2Access Point4Windows 2000 IAS(Internet AuthenticationService)(3) Send username, password toRADIUS server.(4) Approve or deny userlogin to the LAN.The EAP authentication protocols this card has supported areincluded as follows. This setting has to be consistent with thewireless APs or Routers that the card intends to connect.PEAP &TTLS – PEAP and TTLS are similar and easier than TLSin that they specify a stand-alone authentication protocol be usedwithin an encrypted tunnel. TTLS supports any protocol within itstunnel, including CHAP, MS-CHAP, MS-CHAPv2, PAP andEAP-MD5. PEAP specifies that an EAP-compliant authenticationprotocol must be used; this card supports EAP-MSCHAP v2,EAP-TLS/Smart card and Generic Token Card. The clientcertificate is optional required for the authentication.TLS/Smart Card –TLS is the most secure of the EAP protocolsbut not easy to use. It requires that digital certificates beexchanged in the authentication phase. The server presents acertificate to the client. After validating the server’s certificate, theclient presents a client certificate to the server for validation.MD5-Challenge – MD5-Challenge is the easiest EAP Type. Itrequires the wireless station to enter a set of user name andpassword as the identity to RADIUS Server.Session ResumptionThere are “Disabled”, “Reauthentication”, “Roaming”, “SameSsid”and “Always” selections for you to choose whether to recovery thesession in different status.IdentityEnter the name as the identity for the server.PasswordEnter the password as the identity for the server.18
Use Client CertificateA client certificate is required for TLS, and is optional for TTLS andPEAP. This forces a client certificate to be selected from theappropriate Windows Certificate Store and made available to theRADIUS server for certification.ParameterTunneled AuthenticationProtocolDescriptionWhen the authentication type is PEAP or TTLS, select a protocolto be used to build the encrypted tunnel.IdentityThis is the protected user EAP Identity used for authentication.The identity specified may contain up to 63 ASCII characters, iscase sensitive and takes the form of a Network Access Identifier,consisting of @. Theuser’s home realm is optional and indicates the routing domain.Password The password used for authentication. It may contain up to 63ASCII characters and is case sensitive.19
Page 1 and 2: WT-2000PCITurbo-G Wireless LAN Card
Page 3 and 4: during wireless modes of operation.
Page 5 and 6: 1 IntroductionThank you for purchas
Page 7 and 8: 1.3 Package ContentsBefore you begi
Page 9 and 10: B. Insert the Installation CD to yo
Page 11 and 12: F. The system will automatically de
Page 13 and 14: default, this “Windows Zero Confi
Page 15 and 16: ParameterAvailable NetworksDescript
Page 17 and 18: networks will be listed for you to
Page 19 and 20: ParameterAuthentication TypeShared
Page 21: The IEEE 802.1X specification descr
Page 25 and 26: ParameterStatusDescriptionDisplay t
Page 27 and 28: ParameterDescriptionWireless Mode 8
Page 29 and 30: RADIUS server.When you configure yo
Page 31 and 32: B. Right Click the “Wireless Netw
Page 33 and 34: 4 TroubleshootingThis chapter provi
Page 35: 13. What is Spread Spectrum?Spread

User's Manual - AirLive

Create successful ePaper yourself

Delete template?

Save as template?