Product Manual - Zemic

Recommendations

Info

10.0 Loadcell DisplaySelect LC Display in the main menu then press the enter key.Display ( left or right keys to change)LC, will go to final Loadcell display screenorSetupWith Setup selected, press enter to enter the information belowConfigure ( left or right keys to change)4 Wireor6 WireExcitation Voltage ( left or right keys to change)Output, fixed 5 Vdc to LCorMeasure from external excitationorSet 00.00 to 20.000V, theoretical valuemV/VSet to sensitivity value on loadcellor datasheetDec imal Point(left or right keys to change)Display ZeroSet zero value<strong>Zemic</strong> Europe info@zemic.nl www.zemic.nl22
Display SpanSet span valueUnit ( left or right keys to change)Select unit of mass required, eg. KgIncrement (count by) (left or right keys to change)1or10or100Filter Band (left or right keys to set band value)0000 to 9999If sudden change greater than filter bandvalue display will follow actual value withoutdelay to band value.(use 0000 if you do not want this function)Filter TimeSet value for 1, 3, 5 or 10 secondsZero TrimUse to to tare off deadweightPress enter to trim zerowait 10 seconds to trimAfter Zero Trim completed goes to Span Trim<strong>Zemic</strong> Europe info@zemic.nl www.zemic.nl23
Page 1 and 2: Zemic Europe info@zemic.nl www.zemi
Page 3 and 4: Contents1.0 Introduction...32.0 Get
Page 5 and 6: 1.0 IntroductionCALOGThe - LC II is
Page 7 and 8: 2.3 SafetyYour calibrator is not su
Page 9 and 10: 4.0 Wiring SchematicsThis section s
Page 11 and 12: 4.4 Weighing System Pre-calibration
Page 13 and 14: 5.0 Test LoadcellSelect TEST LOADCE
Page 15 and 16: 7.2 Measure mVdc & Mass (and Measur
Page 17 and 18: 8.0 Weighing System Pre-calibration
Page 19 and 20: Span valueSet high value.(If 3 x 1
Page 21 and 22: Loop Power ( left or right keys to
Page 23: Dec Point ( left or right keys to c
Page 27 and 28: Item: Use Left and Right keys to se
Page 29 and 30: Language ( left or right keys to ch
Page 31 and 32: 14.0 Maintenance14.1 Opening your C
Page 33 and 34: 15.0 Technical Specifications15.1 G
Page 35: Zemic Europe B.V. T: +31 76 50 39 4

Product Manual - Zemic

Create successful ePaper yourself

Delete template?

Save as template?