13.07.2015 Views

Installation Manual - James Hardie

Installation Manual - James Hardie

Installation Manual - James Hardie

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Product Warranties<strong>James</strong> <strong>Hardie</strong> ®February 2013All <strong>James</strong> <strong>Hardie</strong> eaves and soffit linings come with a 15 year product warranty. Pre-finished products such as Eclipsa Eaves Lining and SilklineSoffit Lining come with a 10 year coating warranty and 15 year warranty on the base sheet. All accessories supplied by <strong>James</strong> <strong>Hardie</strong> arewarranted for a period of 15 years. For full warranty details visit www.jameshardie.co.nz or Ask <strong>James</strong> <strong>Hardie</strong> on 0800 808 868.Disclaimer: The recommendations in <strong>James</strong> <strong>Hardie</strong>’s literature are based on good building practice, but are not an exhaustive statement of all relevant information andare subject to conditions (c), (d), (f) and (g) in each products warranty under “Conditions of Warranty”. <strong>James</strong> <strong>Hardie</strong> has tested the performance of the Eclipsa EavesLining, <strong>Hardie</strong>Groove Soffit Lining, Silkline ® Soffit Lining, Villaboard ® Soffit Lining, <strong>Hardie</strong>soffit Lining and <strong>Hardie</strong>Flex Eaves when installed in accordance with theEclipsa Eaves Lining, <strong>Hardie</strong>Groove Soffit Lining, Silkline ® Soffit Lining, Villaboard ® Soffit Lining, <strong>Hardie</strong>soffit Lining and <strong>Hardie</strong>Flex Eaves Lining installation manual,in accordance with the standards and verification methods required by the New Zealand Building Code (NZBC) and those test results demonstrate the product complieswith the performance criteria established by the NZBC. However, as the successful performance of the relevant system depends on numerous factors outside the control of<strong>James</strong> <strong>Hardie</strong> (e.g. quality of workmanship and design) <strong>James</strong> <strong>Hardie</strong> shall not be liable for the recommendations made in its literature and the performance of the relevantsystem, including its suitability for any purpose or ability to satisfy the relevant provisions of the NZBC, regulations and standards, as it is the responsibility of the buildingdesigner to ensure that the details and recommendations provided in the relevant <strong>James</strong> <strong>Hardie</strong> installation manual are suitable for the intended project and that specificdesign is conducted where appropriate.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!