Installation Manual - James Hardie

Table 11Components Not Supplied by James HardieJames Hardie recommends the following products for use in conjunction with its eaves and soffit linings. James Hardie does not supplythese products. Please contact component manufacturer for information on their warranties and further information on their products.Accessories Description Accessories DescriptionHardieFlex Nail40 x 2.8mm galvanised or stainless steel nails.Second coat trowel 200mmFor installing second coats on set joints on VillaboardLining.Rondo P35Control joint used in movement joints.Perforated paper tapeJoint reinforcing tape.Finishing coat trowelFor installing top coats on set joints on VillaboardLining.Corner toolFor setting of internal corners on Villaboard Lining.Level/straight edgeFor checking straightness of frame.Hand guillotineGuillotine for cutting fibre cement.HawkTo assist in the application of finishing compoundsespecially with the use of trowels.Hand sanderFor sanding set joints on Villaboard Lining.Collated screw gunNotched trowelFor applying tile adhesive to face of Villaboard Lining.Hole sawBroadknife 150mmFor setting of joints on Villaboard Lining.Electric shear/fibreshearFor cutting Villaboard Soffit Lining, HardieGrooveSoffit Lining, Hardiesoffit Lining, HardieFlex EavesLining.Flashing tapeProprietary tape to adhere to building wrap.Tyvek, Protecto wrap or similarFlashing to Table 20 ‘E2/AS1’Flashing fabricatorFlexible joint sealantTubeSikaflex MS or similarMasking tape3M Scotch Blue painters tape 2090 or Sellotape5855 Long LifePaperback corners‘Goldline’ corner mouldsPolyurethane tapeAdhesive sealantSikaflex-11FC by SikaSeal N Flex-1 by BostikAcrylic paintDulux X10 or similar brandWaterproofing admixtureMultiplast Resin by Plaster Systems. Used in dilutedform over Villaboard Lining sheet edges to controlmoisture suction before flush stopping.James Hardie Eaves And Soffits Installation Manual February 2013 New Zealand 9