Flooring Brochure - Building Systems - BASF.com

FlooringIn industrial, commercial and institutional buildings, it's the flooring that takes the most abuse.Proper selection requires accurate assessment of environmental conditions and hazards.High performance, seamless flooring systems are specifically designed to enhance functional lifeand reduce maintenance costs. They provide high chemical, bacterial and abrasionresistance, ease of maintenance, toughness and durability... in attractive colors, finishesand surface profiles.Underlayments and ToppingsApplications• Underlayments• Surface Sealers & Hardeners• Chemical / Abrasion ResistantCoatings and Toppings• Polymeric &Cementitious Toppings• Joint FillersIndustrial• Pulp and Paper• Petro Chemical Processing• General ManufacturingCommercial / Institutional• Retail Shopping• Maintenance• Mechanical Rooms• WarehousesTechnologies• Acrylic• Silicate• Epoxy• Urethane• Metallic Shake & Topping• PolyureaMBT ® Protection and Repair ProductsThoro ® ProductsSonneborn ® ProductsMASTERTOP ® 110 PLUS UNDERLAYMENTA cement-based, self-leveling, poured-in-place floorunderlayment. It can be used to level precast or cast-in-placeconcrete floors prior to the installation of finished floor materials.It can accept foot traffic in 4 hours and full service within 24hours.Sonoflow ®A flowable, self-leveling underlayment for uneven, rough ordeteriorated floors. It can be extended with aggregate forthicker pours and subsequent lower installed costs. It iscompatible with most radiant heating floor systems.Thoro ® Underlayment Self-LevelingA one-component, extended healing time, cementitiousunderlayment for leveling concrete and sound wood floors priorto the installation of carpet, tile or other flooring systems. Thefinal flooring system can be installed in 24 hours.MASTERTOP ® Topping 112A self-leveling cementitious polymer-modified industrial toppingfor leveling and/or resurfacing distressed industrial concretefloors. It is highly fluid and pumpable for fast installation, andgains rapid strength for fast turnaround time.MB PRIMER IIA single component latex copolymer primer, tinted light blue tofacilitate even coverage. Easy 1:1 mixing with water. An optionalprimer accelerator is available. Primarily used as a primer forboth MASTERTOP ® 110 PLUS UNDERLAYMENT andMASTERTOP ® TOPPING 112.Shake-on HardenersMineralMASTERCRON ®A ready-to-use mineral-aggregate dry shakesurface hardener available in 24 standard colors, including lightreflective formulations. It increases the wear resistance of aconcrete floor surface, extends the service life, and creates ahigh density and easy-to-clean surface with increasedresistance to liquid penetration.MASTERCRON ® FfA mineral-aggregate dry shake surface hardener and flatnessenhancer specifically developed for floors designed to conform toa flatness designation. It provides greater surface density thanplain concrete for resistance to oil and grease penetration.MAXIMENT ®A ready-to-use mineral-aggregate dry shakehardener that provides increased water resistance at a moderatecost. It is recommended for both indoor and outdoor floors inareas that require increased wear resistance, as well as floorsthat are frequently or continually wet.MAXIMENT ® HDAn abrasion-resistant mineral-aggregate dry shake hardenerthat provides maximum hard aggregate surface density andallows application of the dry shake from moderate to heavierrates in one application, thereby optimizing mechanicalapplication techniques. Recommended for indoor concrete floorinstallations requiring increased wear resistance.MetallicMASTERPLATE ® 200A metallic-aggregate dry shake hardener for areas requiringgreater abrasion and impact resistance, and areas subject toheavy or frequent traffic. It provides a high-density surface withincreased resistance to liquid penetration, and is available inlight reflective formulations.MASTERPLATE ® FfA metallic-aggregate dry shake surface hardener and flatnessenhancer especially developed for floors designed to conform toa specific flatness designation. It provides greater abrasion andimpact resistance than mineral aggregate hardeners andtoppings, and leaves a denser surface.LUMIPLATE A non-oxidizing ferrosilicon metallic-aggregate dry shakesurface hardener ideal for industrial floors requiring addedabrasion and impact resistance. It provides greater surfacedensity, and increased resistance to penetration by oil, grease,hydraulic fluids, many industrial chemicals, and is available in alight-reflective formula.MASTERPLATE ® DPSA metallic-aggregate, spark-resistant dry shakesurface hardener recommended for areas where static chargesare continually generated. Its impact resistance is twice that ofplain concrete, and it provides a greater surface density withincreased resistance to penetration by oil, grease, hydraulicfluids, and many industrial chemicals.

Underlayments and ToppingsMASTERTOP ® APS 2011A 100% solids, pigmented hybrid polymer blend ofrapid-curing resins floor coating or topcoat. Used asa coating for concrete warehousing and commercialstorage facilities; light manufacturing and assemblyfacilities; food and beverage facilities; hospitals; schools;new or repair applications that require quick turnaround.Contains no solvents; fast cure rates; low odor allowsinstallation in occupied areas; nonflammable,noncombustible, and noncorrosive;various surface textures can be achieved.High-Build PrimerA 100% solids epoxy primer to fill highly profiledfloors. It can be installed in one lift to a thickness of150 mils. It can be pigmented with a choice of ninecolors and should be topcoated with the appropriateSonneborn ® finish coat.Sonoplex ® Epoxy SurfacerA durable, 100% solids, high-build epoxy topcoatdesigned for medium to heavy traffic areas. It providesboth chemical and abrasion resistance in a variety ofenvironmental conditions. It can be pigmented in achoice of nine separate colors.Prime and KoteA dual-purpose, waterborne, two-component epoxycoating that can be used as a base primer or as afinish coat in areas where a low-odor installation isdesired. It is a fast drying product that allowsminimum downtime between coats and quicker returnto service.Sonothane ® VOCA one-component, high solids, VOC-compliantpolyurethane coating with high gloss. It is designed forinterior use in areas where aesthetics andperformance are preferred. It can be colored withseparate color additives in nine different colors, or canbe used as a clear topcoat for decorative aggregatebroadcast systems.Sonoglaze ® VOCA one-component, UV resistant aliphatic, VOCcompliantpolyurethane coating that can be used ininterior or exterior application. It can be pigmented orused as a highly durable clear topcoat for a variety ofdecorative systems.ToppingsMASTERTOP ® 1182A heavy-duty epoxy and metallic-aggregate troweldown floor topping designed to provide excellentabrasion resistance and high impact tolerance. It ismeasurably tougher than concrete and has goodchemical resistance. It provides a very strong bond toconcrete, and is nonflammable, noncombustible, andsolvent free.MASTERTOP ® APS 2051A 100% solids, hybrid polymer blend of rapidcuringresins combined with a silica aggregate blend.Trowel-applied floor system for seamless 3/16” to1/4” installations. Designed for industrial andmanufacturing facilities, and floor areas that are proneto traffic and abuse such as beverage plants, dairies,breweries, high usage mechanical and shop floors,loading docks and staging areas, and aisleways andother high-traffic areas. Contains no solvents; curesquickly from 40°F to 90°F, excellent bond to concrete;good abrasion resistance; greater toughness and goodchemical resistance.MASTERTOP ® APS 2056A 100% solids, hybrid polymer blend of rapidcuringresins combined with a metallic aggregateblend. Trowel-applied floor system for seamless 1/4”to 1-1/2” installations. Designed for industrial andmanufacturing facilities, and floor areas that are proneto traffic and abuse such as wastecollection and transfer stations, areas of high impactand abrasion, heavy equipment maintenance facilities,and high usage mechanical and shop floors. Containsno solvents; cures quickly from 40°F to 90°F, excellentbond to concrete; high abrasion resistance; greatertoughness and good chemical resistance.Polymeric / Cementitious ToppingsCementitiousMASTERTOP ® Anvil-Top 100An extra heavy-duty metallic-aggregate industrial floortopping which provides extra protection for areassubject to concentrated or high-frequency traffic andhighpoint loads. It offers extremely high compressiveand flexural strengths, and resists oil, grease, andmany industrial chemicals.MASTERTOP ® Topping 112A self-leveling cementitious polymer-modifiedindustrial topping for leveling and/or resurfacingdistressed industrial concrete floors. It is highly fluidand pumpable for fast installation, and gains rapidstrength for fast turnaround time.MASTERTOP ® Anvil-Top 300A heavy-duty metallic-aggregate industrial floortopping which provides extra protection againstabrasion and impact for high-traffic areas such asloading docks, heavy equipment manufacturing,and waste collection and transfer stations. It hasa high-slump screedable consistency, extendedworking time, and compressive strengths equivalent orsuperior to no-slump toppings. Resistant to oil,grease, and many industrial chemicals.Joint FillersEpoxyMASTERFILL ® 300iA semi-rigid, 100 % solids epoxy joint filler usedfor filling non-moving concrete joints or filling andsealing wire slots in concrete pavement. Theeconomical filler is conveniently mixed at a 1:1volume ratio and provides protection and prevention ofspalling in non-moving control and relief jointsin manufacturing, warehouse and commercialapplications.PolyureaMASTERFILL ® 400 CTA two-component, polyurea control joint filler withrapid gel and tack free times for faster turnaround ofhorizontal joints in concrete, industrial floors, runways,highways, bridges, plazas, water treatment andsewage plants. This VOC compliant and solvent freesystem provides resistance to chemicals, abrasion,hydrocarbon attack, corrosion and bonds to dissimilarsubstrates when applied.