Ag Catalog 2003

PGA Series ValvesGlobe / angle valves at an affordable priceThe PGA series valves are highperformance, versatile, andeconomical. These globe and angleconfiguration valves allow installationeither inline or on risers feedingindividual zones.And the PVC construction is designedto handle 150 psi operating pressures.Like the PESB and BPES series valves,the PGA valves have a flow controland internal bleed solenoid formanual internal bleed operation.They can also be easily converted topressure regulating operation byadding the PRS-D. Available in sizesfrom 1", 1 1/2", and 2".PRS-DialPressure regulating moduleThe PRS-Dial is an excellent means ofregulating outlet pressure at the valve.PGA Features• Globe / angle PVC constructionrated to 150 psi (10,35 bars)• Manual internal bleed. Pressureregulation operation withoutelectrical control signal• Convert to pressure regulatingoperation by adding PRS-D moduleOperating Range• Pressure: 15 to 150 psi(1,04 to 10,35 Bars)• Flow: 2 to 150 gpm(0,45 to 34,1 m 3 /h; 0,13 to 9,45 l/s)• Temperature: up to 110 F (43 C)Models• 100PGA 1" NPT (25mm)• 150PGA 1 1/2" NPT (40mm)• 200PGA 2" NPT (50mm)Notes:1.Valve and PRS-D module must be ordered separately2. BSP models available, please specify when orderingIt is used where consistent outletpressure regulation is requiredregardless of inlet pressure variations.The visible scale makes installationquick and easy. The regulator fits allRain Bird PGA, PESB, and BPESvalves. Simply insert between thesolenoid and valve bonnet for quickand easy field installation.Features• Regulates and maintains constantoutlet pressure between 15 and100 psi (1,0 to 6,9 bars) within+/- 3 psi (+/- 0,2 bars)• Adjustment knob with detentspermits fine-tune setting in 1/3 psi(0,02 bars) increments• Schrader valve connects pressurehose gauge, ordered separatelyPerformance Data - PGAPressure Loss (psi)100PGA 100PGA 150PGA 150PGFA 200PGA 200PGAgpm Globe Angle Globe Angle Globe Angle1" 1" 1 1/2" 1 1/2" 2" 2"2 4.1 4.1 - - - -5 4.9 4.6 - - - -10 5.8 5.1 - - - -20 5.3 4.5 - - - -30 5.0 4.5 2.1 1.6 - -40 8.5 7.4 2.8 2.2 1.9 2.050 - - 4.8 2.9 2.0 1.675 - - 11.1 7.4 2.7 1.9100 - - 18.8 12.7 4.6 3.4125 - - - - 8.1 5.1150 - - - - 11.5 7.3Pressure Loss (bars)100PGA 100PGA 150PGA 150PGFA 200PGA 200PGAm 3 /h l/s Globe Angle Globe Angle Globe Angle1" 1" 1 1/2" 1 1/2" 2" 2"0.5 0,14 0,29 0,28 - - - -1 0,28 0,32 0,31 - - - -2 0,56 0,38 0,34 - - - -3 0,83 0,39 0,34 - - - -4 1,11 0,38 0,32 - - - -5 1,39 0,36 0,31 - - - -6 1,67 0,35 0,31 - - - -7 1,94 0,37 0,32 0,15 0,11 - -8 2,22 0,47 0,41 0,17 0,13 - -9 2,50 0,57 0,50 0,19 0,15 - -10 2,78 - - 0,25 0,17 - -12 3,33 - - 0,38 0,24 0,14 0,1114 3,89 - - 0,54 0,35 0,16 0,1216 4,40 - - 0,69 0,46 0,18 0,1322 6,10 - - 1,23 0,83 0,30 0,2228 7,80 - - - - 0,54 0,3434 9,44 - - - - 0,79 0,50Notes:1. Loss values are with flow control fully open.2. PRS-D module recommended for all flow rates.• Inlet pressure difference must be15 psi (1 bar) greater than desiredoutlet pressure for PRS moduleto function• Easy field installation. PRS Dialthreads underneath solenoid andadapter• Improved spike reductioncapabilities reduce water hammer• Dial cartridge retrofits into existingPRS-B unitsModel• PRS-D• PRSPIC (dial cartridge)• PHG (pressure hose gauge)