Packing and Handling Instruction for the TC01(2910C) Type IP-2 ...

Package and Handling Instruction for the TC01 (2910C) Type IP-2 ISO ContainerPage 18 of 289.1.3 If the Container is to be stored for a period of 6 months or longer, all lid clamp nutsshall be removed and a thin coat of lubricant applied to the threaded studs. Theclamps and nuts shall be replaced and tightened to between 15 - 20Nm.9.2 Container Retrieval from StorageUpon retrieval from storage the container vent port cover plate is to be fitted and thecontainer examined in accordance with Section 5.10 References[1] IAEA Safety Standard Series No TS-R-1: Regulations for the Safe Transportof Radioactive Material, 2009 Edition.[2] International Convention for Safe Containers, 1972 (CSC).1996 Edition[3] BS EN ISO 9001 Quality Management Systems – Requirements[4] BS 3951: Part 2: Section 2.1 (ISO 1496/1), Freight Containers. Part 2,Specification and Testing of series 1 freight containers. Section 2.1, GeneralCargo Containers for General Purposes Amendment 1: 1AAA and 1BBBContainers Fifth Edition; Amendment 1: 03/01/93; Amendment 2:07/01/98[5] PAA/GN01 LLW Repository IP2 ISO Container CSC Technical Inspectionand Seal Leakage Test Guidance Document.[6] BS ISO 3874: Series 1 Freight Containers - Handling and Securing FifthEdition; 1997. Corrected and Reprinted 15/07/1999; Amendment 115/11/2000; Amendment 2 01/07/2002.[7] PAA/GN03: Low Level Waste Repository Stud Repair Guidance document.[8] PAA/GN04: Low Level Waste Repository Guidance for Securing Items withinthe TC01, TC03, TC06 & TC09 LLWR IP-2 ISO Containers.[9] PAA/GN02 Low Level Waste Repository IP-2 ISO Container Direct PourEncapsulation Guidance DocumentOM_LLWRGR_MECH_00007_A