R&S®ETL TV Analyzer - Product Brochure - Rohde & Schwarz

¸ETLR&S®TPCHECK transposer measurement softwarefor DVB-T and DVB-HSimilar to R&S®TxCheck, the R&S®TPCHECK transposermeasurement software is used to measure, evaluate anddocument TV signals. R&S®TPCHECK has been speciallydesigned for measurements on transposers. Again, a measurementprofile that can be changed by the user is thebasis for automatic measurements. The measurementscan be executed in three optional steps. The signal qualitycan be measured at the input and output of the transposerand also after a mask filter. R&S®TPCHECK can help determinehow well the measured transposer converts theinput signal. A specific sequence of measurements, whichruns automatically, additionally shows how the transposerbehaves when the input levels vary or when the GPS connectionis faulty. For reproducible results, a high-quality,defined signal source, such as the R&S®SFE broadcasttester, is recommended. The R&S®ETL integrates theR&S®SFE into the automatic measurements. The R&S®SFEis remotely controlled by the R&S®ETL via LAN.Measurement graphics in R&S®TPCHECK.Transposer check with the R&S®SFE¸SFELAN (TCP/IP)RF inDUTRF outRohde & Schwarz R&S®ETL TV Analyzer 29