Cs-3 Manual - Scintrex

Getting StartedThe stray magnetic field created by this current could corrupt themeasurement of the ambient field. To prevent that happening, the outside ofthe electronics box is covered with a thin, plastic insulating sleeve.Important:Please, make sure that this plastic sleeve is notdamaged to such an extent that the metal part of theCS-3 electronics housing is making contact to ametal part of the airplane or vehicle frame.The sensor head connector is mounted on one side panel of the electronicbox. On the opposite side, following components are mounted on the controlpanel, see Figure 4.Hemisphere Control SwitchThe hemisphere control switch is a four-position rotary switch as shownbelow.Figure 4 - Schematic of the hemisphere control switch1- 8CS-3 Manual - part # 762701 Revision 1.0