ASTM Standards

Method 36063610,ASTM StandardsMemberASTM D-3606Benzene & Toluene in Finished Motor & Aviation Gasoline by GCOriginally designed forD-3606-99ASTMAromatics Quantitative Calibration Standard (without Internal Standards)D-3606-SET-25ML$ 800 / set of 7 x 25 mLAnalyte Std. 1 Std. 2 Std. 3 Std. 4 Std. 5 Std. 6 Std. 7Calibr. range Target Vol. % Vol. % Vol. % Vol. % Vol. % Vol. % Vol. %Benzene 0.06 - 5.0 5.00 2.50 1.25 0.67 0.33 0.12 0.06Toluene 0.5 - 20 20.00 15.00 10.00 5.00 2.50 1.00 0.50Isooctane 75.00 82.50 88.75 94.33 97.17 98.88 99.44D-3606MeetsEPA Guidelinesfor RFGAnalysisAromatics Quantitative Calibration Standard (with Internal Standard: MEK)D-3606/IS-SET$ 115 / set of 7 x 1 mLD-3606/IS-SET-2ML$ 190 / set of 7 x 2 mLD-3606/IS-SET-2ML-PAK$ 760 / 5 x (7 x 2) mLAnalyte Std. 1 Std. 2 Std. 3 Std. 4 Std. 5 Std. 6 Std. 7Calibr. range Target Vol. % Vol. % Vol. % Vol. % Vol. % Vol. % Vol. %Benzene 0.06 - 5.0 4.8 2.4 1.2 0.6432 0.3168 0.1152 0.0576Toluene 0.5 - 20 19.2 14.4 9.6 4.8000 2.4000 0.9600 0.4800Isooctane 72.0 79.2 85.2 90.5568 93.2832 94.9248 95.4624Methyl ethyl ketone (Internal Std.) 4.0 4.0 4.0 4.0 4.0 4.0 4.0Gasoline Refinery Quality Control StandardsDaily Quality Control Standard(with Internal Standard: MEK)D-3606-QC/IS-10ML$ 75 / 1 x 10 mLD-3606-QC/IS-10ML-PAK$ 300 / 5 x 10 mLEach at stated quantities4 comps.Compound Target Vol. %Benzene 0.6432Toluene 4.8000Isooctane 90.5568Methyl ethyl ketone (ISTD) 4.0100Daily Quality Control Standard(without Internal Standard)D-3606-QC-25ML$ 125 / 1 x 25 mLD-3606-QC-25ML-PAK$ 600 / 5 x 25 mLEach at stated quantities3 comps.Compound Target Vol. %Benzene 0.67Toluene 5.00Isooctane 94.33100Aromatics Quantitative Calibration Standard (w/ Internal Standard: sec Butanol)D-3606/IS2-SETD-3606/IS2-SET-PAKGasoline Refinery Quality Control StandardsDaily Quality Control StandardDaily Quality Control Standard(with Internal Standard: sec Butanol) (without Internal Standard)D-3606-QC-IS2-25ML$ 125 / 1 x 25 mLD-3606-QC-IS2-25ML-PAK$ 600 / 5 x 25 mLEach at stated quantities4 comps.Compound Target Vol. %Benzene 0.6432Toluene 4.8000Isooctane 90.5568sec-Butanol (ISTD) 4.0100$ 115 / set of 7 x 1 mL$ 500 / 5 x (7 x 1) mLAnalyte Std. 1 Std. 2 Std. 3 Std. 4 Std. 5 Std. 6 Std. 7Calibr. range Target Vol. % Vol. % Vol. % Vol. % Vol. % Vol. % Vol. %Benzene 0.06 - 5.0 4.8 2.4 1.2 0.6432 0.3168 0.1152 0.0576Toluene 0.5 - 20 19.2 14.4 9.6 4.8000 2.4000 0.9600 0.4800Isooctane 72.0 79.2 85.2 90.5568 93.2832 94.9248 95.4624sec Butanol (Internal Standard) 4.0 4.0 4.0 4.0 4.0 4.0 4.0D-3606-QC-25ML$ 125 / 1 x 25 mLD-3606-QC-25ML-PAK$ 600 / 5 x 25 mLEach at stated quantities3 comps.Compound Target Vol. %Benzene 0.67Toluene 5.00Isooctane 94.33100Technical NoteDue to changes in the possibleuse of other oxygenates likeethanol added to gasoline,AccuStandard formulated anew calibration curve usingsec-butanol as an InternalStandard. The use of this newISTD minimizes coelutioncaused by the oxygenate(s)and pre column - standardcolumn configuration in the GCsystem.ASTM D-3610Total Cobalt in Alumina-Base Cobalt-Molybdenum Catalyst by Potentiometric TitrationCobalt Oxide StandardD-3610-93-1$ 50 / 1 x 100 mLCobalt oxide @ 1500 µg/mL in WaterOriginally designed forD-3610-88 (Re-Approved 1993)18 Quality System is Certified to comply with the International ISO 9001 Quality Standard