31.07.2015 Views

Rialta Service Manual - RialtaInfo

Rialta Service Manual - RialtaInfo

Rialta Service Manual - RialtaInfo

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

SECTION 1ELECTRICALF'POWER CORD REMOVAL~ 1. Disconnect power cord from shoreli ne or generator power.2. Remove power cord plate retaining screws (6) (located in left rear cap trunk). Pull plate free of rear cap.3. Disconnect power cord wires at load center. Note location of wire connections for ease of laterinstallation.4. Loosen power cord connector at load center. Pull coad free of load center. Remove connector fromcable.5. Remove any clamps retaining the power cord.6. Pull power cord free of the vehicle.POWER CORD REPLACEMENT1. Place connector for power plate into cord.2. Route cord through rear cap and back wall up to the load center.3. Place connector for load center into cord. Route cord into load center.4. Make wire connections at load center. Tighten cord connector at load center.5. Install any power cord retaining clamps.6. Install power plate into power plate connector, tighten connector.7. Install power plate to rear cap. Secure with (6) retaining screws.1-7

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!