FASTEKS+ FILKO® Blind rivet nuts - KVT-Fastening Sp. z o.o.
FASTEKS+ FILKO® Blind rivet nuts - KVT-Fastening Sp. z o.o.
FASTEKS+ FILKO® Blind rivet nuts - KVT-Fastening Sp. z o.o.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
FASTEKS FILKO ®<strong>Blind</strong> <strong>rivet</strong> <strong>nuts</strong>Efficient, blind, resilient
High-performance solutions from <strong>KVT</strong>-<strong>Fastening</strong>are found wherever absolutely safe and secureconnections are essential. These small butextremely resilient components play key roleswhere it matters most – whether in the electronicsand energy sector, the automotive and transportationindustries, aviation and aerospace, engineeringand construction, precision engineering, ormedical equipment.<strong>KVT</strong>-<strong>Fastening</strong> does not just supply standardproducts and individual components, but also providesclose and active customer support in thesearch for ideal solutions, particularly when specificrequirements must be fulfilled. This portfoliois complemented by a range of innovative tools andmachines as well as, if needed, the integration intoautomated serial production workflows.Ever since 1927, <strong>KVT</strong>-<strong>Fastening</strong> has stood forexperience, solution-driven know-how, uniqueexpertise in development and consultancy as wellas the ultimate in reliability. Since December2012, <strong>KVT</strong>-<strong>Fastening</strong> is a member of the BossardGroup. Bossard is a leading provider of intelligentsolutions for industrial fastening technology. Therange includes global sales, technical consulting(engineering) and logistics of fastening technologycomponents and bolts. Customers benefitfrom the extension of competencies in industrialfastening technology and from an optimallyenhanced product or service portfolio.3
FASTEKS FILKO ® – <strong>Fastening</strong> technologyFASTEKS FILKO ® blind <strong>rivet</strong> <strong>nuts</strong> are single-parthollow-thread <strong>nuts</strong> which are installed ‘blind’ froma single side without the need for reworking. Theytherefore represent an efficient and impressivesolution. Generally used for screw connections,they can also be applied in a combination of <strong>rivet</strong>ingand additional screw fastenings. A resilientthread is produced as a result, especially on thincomponents and hollow sections. The pronounced<strong>rivet</strong> beading on the rear side guarantees a hightear-out strength.Advantages• Can be installed from a single side – ‘blindapplication’• Can be used as a blind <strong>rivet</strong> or blind <strong>rivet</strong> nut• High tear-out strength as the result ofpronounced <strong>rivet</strong> beading• Use on surface-treated parts possible• Wide range of head shapes and materialssupplied• Efficient processing with manual or pneumatichydraulictoolsMore about FASTEKS ®www.kvt-fastening.de/en/products/brands/fasteks4
ContentsTechnical information 6 – 7FASTEKS FILKO ® blind <strong>rivet</strong> <strong>nuts</strong>, flat head, open, cold-formed 8Steel, zinc plated, thick coat passivated (RoHS compliant) STor stainless steel 1.4567 (A2) / AISI 304 CuFASTEKS FILKO ® blind <strong>rivet</strong> <strong>nuts</strong>, 90° countersunk head, open, cold-formed9Steel, zinc plated, thick coat passivated (RoHS compliant) STor stainless steel 1.4567 (A2) / AISI 304 CuFASTEKS FILKO ® blind <strong>rivet</strong> <strong>nuts</strong>, flush head, open, cold-formed 10 – 11Steel, zinc plated, thick coat passivated (RoHS compliant) STor stainless steel 1.4567 (A2) / AISI 304 CuFASTEKS FILKO ® blind <strong>rivet</strong> <strong>nuts</strong>, flush head, open, cold-formed12Steel, zinc plated, thick coat passivated (RoHS compliant)FASTEKS FILKO ® blind <strong>rivet</strong> <strong>nuts</strong>, flat head, open13Steel, zinc plated, thick coat passivated (RoHS compliant)FASTEKS FILKO ® blind <strong>rivet</strong> <strong>nuts</strong>, flush head, open 14Steel, zinc plated, thick coat passivated (RoHS compliant)FASTEKS FILKO ® blind <strong>rivet</strong> <strong>nuts</strong>, flat head, closed15Steel, zinc plated, thick coat passivated (RoHS compliant)FASTEKS FILKO ® blind <strong>rivet</strong> <strong>nuts</strong>, flush head, closed16Steel, zinc plated, thick coat passivated (RoHS compliant)FASTEKS FILKO ® blind <strong>rivet</strong> <strong>nuts</strong>, flat head, open 17 – 18Stainless steel (A2) AISI 302/304 / Stainless Steel 1.4404 (A4) / AISI 316LFASTEKS FILKO ® blind <strong>rivet</strong> <strong>nuts</strong>, flush head, open 19 – 20Stainless steel (A2) AISI 302/304 / Stainless Steel 1.4404 (A4) / AISI 316LFASTEKS FILKO ® blind <strong>rivet</strong> <strong>nuts</strong>, flush head, open21Stainless steel (A2) AISI 302/304FASTEKS FILKO ® blind <strong>rivet</strong> <strong>nuts</strong>, flush head, closed22Stainless steel (A2) AISI 302/304FASTEKS FILKO ® blind <strong>rivet</strong> bolts, flat head24Steel, zinc plated, thick coat passivated (RoHS compliant)FASTEKS FILKO ® blind <strong>rivet</strong> bolts, countersunk head25Steel, zinc plated, thick coat passivated (RoHS compliant)FASTEKS FLEXINUT ® blind clip-in <strong>nuts</strong>26Neoprene, brassHand tools and pneumatic-hydraulic tools 28 – 30All dimensions are specified in mm.5
Fasteks filko ®Technical informationInstallation sequence1 2 3 4 5Stage 1Thread the blind<strong>rivet</strong> nut onto themandrel.Stage 2Insert the blind<strong>rivet</strong> nut into theinstallation hole.Stage 3Compress – thenut is drawnagainst the mouthpieceof the tooland expands radiallyin and behindthe installationhole.Stage 4Retrieve themandrel from theinstalled blind<strong>rivet</strong> nut.Stage 5The blind <strong>rivet</strong> nutcan now be loaded.Configuration for checking torque – the screwed-on part must not rotate.Technical data (standard values)Thread Stainless steel Steel AluminumAxial loadkNShear forcevkNTighteningtorquesNmAxial loadkNShear forcekNTighteningtorquesNmAxial loadkNShear forcekNTighteningtorquesNmM3 6.0 2.8 1.2 5.0 2.5 1.2 2.8 1.0 0.6M4 9.0 3.3 3.1 8.0 3.0 3.1 4.8 1.4 2.0M5 12.0 3.6 6.2 11.0 3.3 6.2 6.5 1.8 4.0M6 16.0 5.0 10.2 15.0 4.4 10.2 8.3 2.6 6.0M8 30.0 7.3 24.2 28.0 6.5 24.2 13.0 4.3 15.0M10 40.0 8.6 48.6 38.0 8.0 48.6 20.0 6.6 27.0M12 60.0 12.0 86.0 56.0 11.6 86.0 28.0 9.0 45.0These values may vary considerably depending on the quality, surface and dimensional accuracy of screws,plate and installation hole – it is therefore advisable to run initial trials.Tightening torque is not identical with torsion resistance!www.kvt-fastening.com7
<strong>Blind</strong> <strong>rivet</strong> <strong>nuts</strong>Flat head, open, cold-formedType FK round shank3-D Data: http://kvt.partcommunity.comLK D dSType RFK knurled shank3-D Data: http://kvt.partcommunity.comLK D dSType HEX FK hexagonal shank(enhanced resistance to spinning in the hole)3-D Data: http://kvt.partcommunity.comd DL dKHoleSHMaterialSteel, zinc plated, thick coat passivated(RoHS compliant) ST orstainless steel 1.4567 A2 / AISI 304 CuAdditional types on requestOrdering data example: M4-20 RFK STThread size M4 +code indicating grip rangeType: Knurled shankMaterial: SteelThreadM4M5M6M8M10M12Grip rangeK0.3 – 2.0 20= Code Hole-/H+0.1 d D S L1.5 – 3.0 30 6.0 6.0 9.0 0.810.72.5 – 4.0 40 11.70.5 – 3.0 3013.07.0 7.0 10.0 1.02.0 – 4.0 40 15.00.5 – 3.0 3014.59.0 9.0 13.0 1.53.5 – 6.0 60 17.50.5 – 3.5 3516.011.0 11.0 16.0 1.53.0 – 6.0 60 18.50.8 – 3.5 3521.013.0 13.0 19.0 2.03.0 – 6.0 60 24.01.0 – 4.0 4024.016.0 16.0 23.0 2.03.5 – 7.0 70 28.09.78www.kvt-fastening.com
Fasteks filko ®<strong>Blind</strong> <strong>rivet</strong> <strong>nuts</strong>Countersunk head 90°*, open, cold-formedType SK round shank3-D Data: http://kvt.partcommunity.comLK D dSType RSK knurled shank3-D Data: http://kvt.partcommunity.comLKMaterialSteel, zinc plated, thick coat passivated(RoHS compliant) ST orstainless steel 1.4567 A2 / AISI 304 Cu DS dAdditional types on requestOrdering data example: M4-36 RSK STThread size M4 +code indicating grip rangeType: Knurled shankMaterial: SteelThreadM4M5M6M8M10M12Grip rangeK= Code Hole-/H+0.1 d D S L1.5 – 3.5 3611.56.0 6,0 9,0 1.53.5 – 5.0 51 13.52.0 – 4.0 4113.07.0 7,0 10,0 1.54.0 – 6.0 61 15.01.0 – 3.0 3114.09.0 9,0 11,0 1.03.5 – 6.0 61 17.01.0 – 3.0 3116.011.0 11,0 13,0 1.03.5 – 6.0 61 19.01.5 – 4.0 4122.013.0 13,0 15,5 1.63.5 – 6.5 66 25.01.7 – 4.5 4626.016.0 16,0 19,0 1.84.0 – 7.5 76 29.0* Countersinking of the drilled hole is necessary.www.kvt-fastening.com9
<strong>Blind</strong> <strong>rivet</strong> <strong>nuts</strong>Flush head*, open, cold-formedType TSN round shank3-D Data: http://kvt.partcommunity.comLK D dSType RTSN knurled shank3-D Data: http://kvt.partcommunity.comLK D dSType HEXTSN hexagonal shank(enhanced resistance to spinning in the hole)3-D Data: http://kvt.partcommunity.comdL dHoleDSHMaterialSteel, zinc plated, thick coat passivated(RoHS compliant) ST orstainless steel 1.4567 A2 / AISI 304 CuAdditional types on requestOrdering data example: M4-20 RTSN STThread size M4 +code indicating grip rangeType: Knurled shankMaterial: SteelThreadM4M5M6M8M10M12Grip rangeK= Code Hole-/H+0.1 d D S L0.3 – 2.0 2010.56.0 6.0 6.8 0.52.0 – 3.0 30 11.50.5 – 3.0 3011.57.0 7.0 8.0 0.52.5 – 4.5 45 13.00.5 – 3.0 302.0 – 4.5 45 9.0 9.0 10.0 0.616.03.5 – 6.0 60 17.50.5 – 3.0 302.0 – 4.5 45 11.0 11.0 12.0 0.618.03.0 – 6.0 60 19.50.8 – 3.5 3520.013.0 13.0 14.2 0.63.0 – 6.0 60 23.01.0 – 4.0 4024.016.0 16.0 17.2 0.63.5 – 7.5 70 27.514.516.5* With flush heads, no countersinking of the drilled hole is necessary ^= time saving.10www.kvt-fastening.com
Fasteks filko ®<strong>Blind</strong> <strong>rivet</strong> <strong>nuts</strong>Flush head*, open, cold-formedType Poly round shank3-D Data: http://kvt.partcommunity.comLK D dSType RPoly knurled shank3-D Data: http://kvt.partcommunity.comLK D dSType HEXPoly hexagonal shank(enhanced resistance to spinning in the hole)3-D Data: http://kvt.partcommunity.comdL dHoleDSHMaterialSteel, zinc plated, thick coat passivated(RoHS compliant) ST orstainless steel 1.4567 A2 / AISI 304 CuGrip range of up to 3.0 for all thread sizesAdditional types on requestOrdering data example: M4 RPoly STThread size M4Type: Knurled shankMaterial: SteelThreadGrip rangeKHole-/H+0.1 d D S LM4 0.5 – 3.0 7.0 7.0 8.0 0.5 10.5M6 0.5 – 3.0 8.0 8.0 9.0 0.5 13.0M8 0.5 – 3.0 10.0 10.0 11.0 0.5 15.5* With flush heads, no countersinking of the drilled hole is necessary ^= time saving.www.kvt-fastening.com11
<strong>Blind</strong> <strong>rivet</strong> <strong>nuts</strong>Flush head*, open, cold-formedType AVKS round shank3-D Data: http://kvt.partcommunity.comLKLK D d D dSType AVRKS knurled shank3-D Data: http://kvt.partcommunity.comSType AVHEXKS hexagonal shank(enhanced resistance to spinning in the hole)3-D Data: http://kvt.partcommunity.comdL dHoleDSHMaterialSteel, zinc plated, thick coat passivated(RoHS compliant)Additional types on requestOrdering data example: M4 AVRKSThread size M4Type: Knurled shankThreadGrip rangeKHole-/H+0.1 d D S LM4 0.5 – 2.0 6.4 6.4 7.1 0.5 10.5M5 0.5 – 3.0 7.2 7.2 7.9 0.6 12.0M6 0.5 – 3.0 9.5 9.5 10.2 0.6 14.0M8 0.5 – 3.0 10.5 10.5 11.3 0.6 16.0* With flush heads, no countersinking of the drilled hole is necessary ^= time saving.12www.kvt-fastening.com
Fasteks filko ®<strong>Blind</strong> <strong>rivet</strong> <strong>nuts</strong>Flat head, openType UC round shank3-D Data: http://kvt.partcommunity.comLK D dSType RUC knurled shank3-D Data: http://kvt.partcommunity.comLK D dSType HUC hexagonal shank(enhanced resistance to spinning in the hole)3-D Data: http://kvt.partcommunity.comd DL dKHoleSHMaterialSteel, zinc plated, thick coat passivated(RoHS compliant)Additional types on requestOrdering data example: M4 RUC FEF 3.0Thread size M4Type: Knurled shankCode indicating grip rangeThreadM3M4M5M6M8M10M12Grip rangeK= Code Hole-/H+0.1 d D S Lup to 1.7 FEF 1.77.75.0 5.0 7.0 0.81.1 – 2.3 FEF 2.3 8.3up to 2.1 FEF 2.110.16.0 6.0 8.0 0.81.3 – 3.0 FEF 3.0 10.9up to 1.5 FEF 1.51.0 – 2.5 FEF 2.5 7.0 7.0 9.0 1.011.71.5 – 3.5 FEF 3.5 12.7up to 2.5 FEF 2.514.29.0 9.0 11.0 1.21.5 – 3.5 FEF 3.5 15.21.0 – 3.0 FEF 3.015.611.0 11.0 14.0 1.53.0 – 5.0 FEF 5.0 18.00.5 – 4.0 FEF 4.021.313.0 13.0 16.0 1.53.0 – 5.5 FEF 5.5 23.0up to 4.2 FEF 4.224.016.0 16.0 20.0 1.73.5 – 7.6 FEF 7.6 27.610.7www.kvt-fastening.com13
<strong>Blind</strong> <strong>rivet</strong> <strong>nuts</strong>Flush head*, openType UC round shank3-D Data: http://kvt.partcommunity.comLK D dSType RUC knurled shank3-D Data: http://kvt.partcommunity.comLK D dSType HUC hexagonal shank(enhanced resistance to spinning in the hole)3-D Data: http://kvt.partcommunity.comdL dHoleDSHMaterialSteel, zinc plated, thick coat passivated(RoHS compliant)Additional types on requestOrdering data example: M4 RUC FEKS 3,0Thread size M4Type: Knurled shankCode indicating grip rangeThreadM3M4M5M6M8M10M12Grip rangeK= Code Hole-/H+0.1 d D S Lup to 1.1 FEKS 1,17.25.0 5.0 5.8 0.31.1 –2.3 FEKS 2,3 8.4up to 1.3 FEKS 1,39.46.0 6.0 6.8 0.31.3 – 3.0 FEKS 3,0 11.0up to 1.5 FEKS 1,51.0 – 2.5 FEKS 2,5 7.0 7.0 8.0 0.411.81.5 – 3.5 FEKS 3,5 12.8up to 1.5 FEKS 1,513.39.0 9.0 10.0 0.41.5 – 3.5 FEKS 3,5 15.3up to 1.8 FEKS 1,81.0 – 3.0 FEKS 3,0 11.0 11.0 12.0 0.415.93.0 – 5.0 FEKS 5,0 17.8up to 3.2 FEKS 3,220.713.0 13.0 14.4 0.53.0 – 5.5 FEKS 5,5 22.9up to 4.2 FEKS 4,224.116.0 16.0 17.4 0.53.5 – 7.6 FEKS 7,6 27.710.814.5* With flush heads, no countersinking of the drilled hole is necessary ^= time saving.14www.kvt-fastening.com
Fasteks filko ®<strong>Blind</strong> <strong>rivet</strong> <strong>nuts</strong>Flat head, closedType UC round shank3-D Data: http://kvt.partcommunity.comLK D dSType RUC knurled shank3-D Data: http://kvt.partcommunity.comLK D dSType HUC hexagonal shank(enhanced resistance to spinning in the hole)3-D Data: http://kvt.partcommunity.comd DL dKHoleSHMaterialSteel, zinc plated, thick coat passivated(RoHS compliant)Additional types on requestOrdering data example: M4 RUC FEFG 3,7Thread size M4Type: Knurled shankCode indicating grip rangeThreadM3M4M5M6M8M10M12Grip rangeK= Code Hole-/H+0.1 d D S Lup to 1.1 FEFG 1,111.61.1 – 2.3 FEFG 2,3 5.0 5.0 7.0 0.812.82.3 – 3.0 FEFG 3,0 13.4up to 2.1 FEFG 2,115.86.0 6.0 8.0 0.81.7 – 3.7 FEFG 3,7 17.4up to 1.5 FEFG 1,517.21.0 – 2.5 FEFG 2,5 7.0 7.0 9.0 1.018.22.0 – 3.5 FEFG 3,5 19.20.5 – 2.5 FEFG 2,522.29.0 9.0 11.0 1.21.5 – 3.5 FEFG 3,5 23.21.0 – 3.0 FEFG 3,025.111.0 11.0 14.0 1.53.0 – 5.0 FEFG 5,0 27.50.5 – 4.0 FEFG 4,032.813.0 13.0 16.0 1.52.5 – 5.5 FEFG 5,5 34.3up to 4.2 FEFG 4,236.016.0 16.0 20.0 1.73.5 – 7.6 FEFG 7,6 39.6www.kvt-fastening.com15
<strong>Blind</strong> <strong>rivet</strong> <strong>nuts</strong>Flush head*, closedType UC round shank3-D Data: http://kvt.partcommunity.comLK D dSType RUC knurled shank3-D Data: http://kvt.partcommunity.comLK D dSType HUC hexagonal shank(enhanced resistance to spinning in the hole)3-D Data: http://kvt.partcommunity.comdL dHoleDSHMaterialSteel, zinc plated, thick coat passivated(RoHS compliant)Additional types on requestOrdering data example: M4 RUC FEKSG 3,0Thread size M4Type: Knurled shankCode indicating grip rangeThreadM3M4M5M6M8M10M12Grip rangeK= Code Hole-/H+0.1 d D S Lup to 1.1 FEKSG 1,111.71.0 – 2.3 FEKSG 2,3 5.0 5.0 5.8 0.312.92.3 – 3.2 FEKSG 3,2 13.8up to 1.3 FEKSG 1,315.16.0 6.0 6.8 0.31.3 – 3.0 FEKSG 3,0 16.8up to 1.5 FEKSG 1,516.51.0 – 2.5 FEKSG 2,5 7.0 7.0 8.0 0.417.51.5 – 3.5 FEKSG 3,5 18.5up to 1.5 FEKSG 1,521.39.0 9.0 10.0 0.41.5 – 3.5 FEKSG 3,5 23.3up to 1.8 FEKSG 1,824.01.0 – 3.0 FEKSG 3,0 11.0 11.0 12.0 0.425.43.0 – 5.0 FEKSG 5,0 27.8up to 3.2 FEKSG 3,232.013.0 13.0 14.4 0.53.0 – 5.5 FEKSG 5,5 34.4up to 4.2 FEKSG 4,236.116.0 16.0 17.4 0.53.5 – 7.6 FEKSG 7,6 39.7* With flush heads, no countersinking of the drilled hole is necessary ^= time saving.16www.kvt-fastening.com
Fasteks filko ®<strong>Blind</strong> <strong>rivet</strong> <strong>nuts</strong>Flat head, openType C round shank3-D Data: http://kvt.partcommunity.comLK D dSType RC knurled shank3-D Data: http://kvt.partcommunity.comLK D dSType HC hexagonal shank(enhanced resistance to spinning in the hole)3-D Data: http://kvt.partcommunity.comd DL dKHoleSHMaterialStainless steel (A2) AISI 302/304Additional types on requestOrdering data example: M4 RC ROF 3,0Thread size M4Type: Knurled shankCode indicating grip rangeThreadM3M4M5M6M8M10M12Grip rangeK= Code Hole-/H+0.1 d D S Lup to 1.1 ROF 1,17.21.0 – 2.3 ROF 2,3 5.0 5.0 7.0 0.87.82.3 – 3.0 ROF 3,0 8.5up to 1.3 ROF 1,38.30.8 – 2.1 ROF 2,1 6.0 6.0 8.0 0.89.11.8 – 3.0 ROF 3,0 9.9up to 1.5 ROF 1,59.51.0 – 2.5 ROF 2,5 7.0 7.0 9.0 1.010.51.5 – 3.5 ROF 3,5 11.50.5 – 2.5 ROF 2,512.89.0 9.0 11.0 1.21.5 – 3.5 ROF 3,5 13.81.0 – 3.0 ROF 3,015.111.0 11.0 14.0 1.53.0 – 5.0 ROF 5,0 17.31.0 – 4.0 ROF 4,019.813.0 13.0 16.0 1.52.5 – 5.5 ROF 5,5 21.3up to 4.2 ROF 4,220.616.0 16.0 20.0 1.74.0 – 7.6 ROF 7,6 26.0www.kvt-fastening.com17
<strong>Blind</strong> <strong>rivet</strong> <strong>nuts</strong>Flat head, openType C round shank3-D Data: http://kvt.partcommunity.comLKSLK D d D dType RC knurled shank3-D Data: http://kvt.partcommunity.comSType HC hexagonal shank(enhanced resistance to spinning in the hole)3-D Data: http://kvt.partcommunity.comd DL dKHoleSHMaterialStainless steel 1.4404 (A4) / AISI 316LAdditional types on requestOrdering data example: M4 HC 4404F 3,0Thread size M4Type: Knurled shankCode indicating grip rangeThreadM4M5M6M8Grip rangeK= Code Hole-/H+0.1 d D S Lup to 1.3 4404F 1,38.30.8 – 2.1 4404F 2,1 6.0 6.0 8.0 0.89.01.8 – 3.0 4404F 3,0 9.9up to 1.5 4404F 1,59.57.0 7.0 9.0 1.01.5 – 3.5 4404F 3,5 11.5up to 1.5 4404F 1,511.89.0 9.0 11.0 1.21.5 – 3.5 4404F 3,5 13.8up to 1.8 4404F 1,813.91.0 – 3.0 4404F 3,0 11.0 11.0 14.0 1.515.43.0 – 5.0 4404F 5,0 17.318www.kvt-fastening.com
Fasteks filko ®<strong>Blind</strong> <strong>rivet</strong> <strong>nuts</strong>Flush head*, openType C round shank3-D Data: http://kvt.partcommunity.comLK D dSType RC knurled shank3-D Data: http://kvt.partcommunity.comLK D dSType HC hexagonal shank(enhanced resistance to spinning in the hole)3-D Data: http://kvt.partcommunity.comdL dHoleDSHMaterialStainless steel (A2) AISI 302/304Additional types on requestOrdering data example: M4 RC ROKS 3,0Thread size M4Type: Knurled shankCode indicating grip rangeThreadM3M4M5M6M8M10M12Grip rangeK= Code Hole-/H+0.1 d D S Lup to 1.1 ROKS 1,16.71.0 – 2.3 ROKS 2,3 5.0 5.0 5.8 0.37.92.3 – 3.2 ROKS 3,2 8.8up to 1.3 ROKS 1,38.41.0 – 2.3 ROKS 2,3 6.0 6.0 6.8 0.39.71.8 – 3.0 ROKS 3,0 10.0up to 1.5 ROKS 1,59.61.0 – 2.5 ROKS 2,5 7.0 7.0 8.0 0.410.61.5 – 3.5 ROKS 3,5 11.6**up to 1.5 ROKS 1,511.99.0 9.0 10.0 0.41.5 – 3.5 ROKS 3,5 13.9up to 1.8 ROKS 1,814.11.0 – 3.0 ROKS 3,0 11.0 11.0 12.0 0.415.63.0 – 5.0 ROKS 5,0 17.4up to 3.2 ROKS 3,219.013.0 13.0 14.4 0.52.5 – 5.5 ROKS 5,5 21.4up to 4.2 ROKS 4,222.516.0 16.0 17.4 0.54.0 – 7.6 ROKS 7,6 26.1* With flush heads, no countersinking of the drilled hole is necessary ^= time saving.** Length for type HC = 12.9www.kvt-fastening.com19
<strong>Blind</strong> <strong>rivet</strong> <strong>nuts</strong>Flush head*, openType C round shank3-D Data: http://kvt.partcommunity.comLKSLK D d D dType RC knurled shank3-D Data: http://kvt.partcommunity.comSType HC hexagonal shank(enhanced resistance to spinning in the hole)3-D Data: http://kvt.partcommunity.comdL dHoleDSHMaterialStainless steel 1.4404 (A4) / AISI 316LAdditional types on requestOrdering data example: M4 HC 4404KS 3,0Thread size M4Type: Knurled shankCode indicating grip rangeThreadM4M5M6M8Grip rangeK= Code Hole-/H+0.1 d D S Lup to 1.3 4404KS 1,38.41.0 – 2.3 4404KS 2,3 6.0 6.0 6.8 0.39.71.8 – 3.0 4404KS 3,0 10.0up to 1.5 4404KS 1,59.67.0 7.0 8.0 0.41.5 – 3.5 4404KS 3,5 11.6up to 1.5 4404KS 1,511.99.0 9.0 10.0 0.41.5 – 3.5 4404KS 3,5 13.9up to 1.8 4404KS 1,814.11.0 – 3.0 4404KS 3,0 11.0 11.0 12.0 0.415.63.0 – 5.0 4404KS 5,0 17.4* With flush heads, no countersinking of the drilled hole is necessary ^= time saving.20www.kvt-fastening.com
Fasteks filko ®<strong>Blind</strong> <strong>rivet</strong> <strong>nuts</strong>Flat head, closedType C round shank3-D Data: http://kvt.partcommunity.comLK D dSType RC knurled shank3-D Data: http://kvt.partcommunity.comLK D dSType HC hexagonal shank(enhanced resistance to spinning in the hole)3-D Data: http://kvt.partcommunity.comd DL dKHoleSHMaterialStainless steel (A2) AISI 302/304Additional types on requestOrdering data example: M4 RC ROFG 3,7Thread size M4Type: Knurled shankCode indicating grip rangeThreadM3M4M5M6M8M10M12Grip rangeKup to 1.1 ROFG 1,1= Code Hole-/H+0.1 d D S L1.0 – 2.3 ROFG 2,3 5.0 5.0 7.0 0.811.92.3 – 3.0 ROFG 3,0 12.6up to 1.3 ROFG 1,30.8 – 2.1 ROFG 2,1 6.0 6.0 8.0 0.814.82.5 – 3.7 ROFG 3,7 16.4up to 1.5 ROFG 1,51.0 – 2.5 ROFG 2,5 7.0 7.0 9.0 1.017.01.5 – 3.5 ROFG 3,5 18.00.5 – 2.5 ROFG 2,520.89.0 9.0 11.0 1.21.5 – 3.5 ROFG 3,5 21.81.0 – 3.0 ROFG 3,023.811.0 11.0 14.0 1.53.0 – 5.0 ROFG 5,0 26.21.0 – 4.0 ROFG 4,031.813.0 13.0 16.0 1.52.5 – 5.5 ROFG 5,5 32.8up to 4.2 ROFG 4,234.316.0 16.0 20.0 1.74.0 – 7.6 ROFG 7,6 37.911.214.016.0www.kvt-fastening.com21
<strong>Blind</strong> <strong>rivet</strong> <strong>nuts</strong>Flush head*, closedType C round shank3-D Data: http://kvt.partcommunity.comLK D dSType RC knurled shank3-D Data: http://kvt.partcommunity.comLK D dSType HC hexagonal shank(enhanced resistance to spinning in the hole)3-D Data: http://kvt.partcommunity.comdL dHoleDSHMaterialStainless steel (A2) AISI 302/304Additional types on requestOrdering data example: M4 RC ROKSG 3,0Thread size M4Type Knurled shankCode indicating grip rangeThreadM3M4M5M6M8M10M12Grip rangeKup to 1.1 ROKSG 1,1= Code Hole-/H+0.1 d D S L1.0 – 2.3 ROKSG 2,3 5.0 5.0 5.8 0.311.92.3 – 3.2 ROKSG 3,2 13.8up to 1.3 ROKSG 1,31.0 – 2.3 ROKSG 2,3 6.0 6.0 6.8 0.315.01.8 – 3.0 ROKSG 3,0 16.0up to 1.5 ROKSG 1,51.0 – 2.5 ROKSG 2,5 7.0 7.0 8.0 0.417.51.5 – 3.5 ROKSG 3,5 18.5up to 1.5 ROKSG 1,519.99.0 9.0 10.0 0.41.5 – 3.5 ROKSG 3,5 21.9up to 1.8 ROKSG 1,81.0 – 3.0 ROKSG 3,0 11.0 11.0 12.0 0.424.83.0 – 5.0 ROKSG 5,0 26.9up to 3.2 ROKSG 3,231.013.0 13.0 14.4 0.52.5 – 5.5 ROKSG 5,5 33.4up to 4.2 ROKSG 4,234.516.0 16.0 17.4 0.54.0 – 7.6 ROKSG 7,6 37.910.714.416.523.3* With flush heads, no countersinking of the drilled hole is necessary ^= time saving.22www.kvt-fastening.com
Fasteks filko ®www.kvt-fastening.com23
<strong>Blind</strong> <strong>rivet</strong> boltsFlat head3-D Data: http://kvt.partcommunity.comMaterialSteel, zinc plated, thick coat passivated(RoHS compliant)DKBdL3We recommend the following tools:Type DFS 309 T or <strong>KVT</strong>-types with appropriateancillary equipment, see page 28 – 30.L2L1Additional types on requestThread Order code Grip rangeKM5M6M8Hole-+0.1D K B d L1 L2* L3*M5x201018.0 10.00.2 – 2.09.0M5x2015 23.0 15.06.6 9.0 0.756.5M5x351018.0 10.02.0 – 3.5 10.5M5x3515 23.0 15.0M6x251019.5 10.0M6x2515 0.3 – 2.4 7.8 10.0 1.00 10.0 7.7 24.5 15.0M6x2520 29.5 20.0M6x401019.5 10.0M6x4015 2.5 – 4.0 7.8 10.0 1.00 11.5 7.7 24.5 15.0M6x4020 29.5 20.0M6x601021.0 10.0M6x6012 24.0 12.04.0 – 6.0 7.8 10.0 1.00 13.5 7.7M6x6015 26.0 15.0M6x6020 31.0 20.0M8x301527.0 15.00.3 – 3.012.5M8x3020 32.0 20.09.9 12.0 1.509.8M8x501527.0 15.03.0 – 5.0 15.0M8x5020 32.0 20.04.55.05.05.07.0* Dimensions may differ according to the stroke setting of the tool.24www.kvt-fastening.com
Fasteks filko ®<strong>Blind</strong> <strong>rivet</strong> boltsCountersunk head3-D Data: http://kvt.partcommunity.comMaterialSteel, zinc plated, thick coat passivated(RoHS compliant)90°DKdL3We recommend the following tools:Type DFS 309 T or <strong>KVT</strong>-types with appropriateancillary equipment, see page 28 – 30.BL2L1Additional types on requestThread Order code Grip rangeKM5M6M8Hole-+0.1D K B d L1 L2* L3*M5x311018.0 10.01.5 – 3.0 6.6 9.0 1.40 10.0 6.5M5x3115 23.0 15.0M6x361019.5 10.0M6x3615 1.5 – 3.4 7.8 10.0 1.30 11.0 7.7 24.5 15.0M6x3620 29.5 20.0M8x411527.0 15.01.5 – 4.013.5M8x4120 32.0 20.09.9 12.0 1.309.8M8x561527.0 15.04.0 – 5.5 15.0M8x5620 32.0 20.04.55.07.0* Dimensions may differ according to the stroke setting of the tool.www.kvt-fastening.com25
<strong>Blind</strong> clip-in <strong>nuts</strong>Flat head and large flat headFlexiNut seriesNeoprene versionS• Can be installed without tools• Can be used blind (sections, pipes)• Also suitable for blind holes• Dampens shocks and vibration• Dielectrically (insulating) d DMaterialNeoprene/thread insert of brassFlat headThread Order code Grip range Hole-+ 0.1 d D S LM3 M3 WNPA 11 0.4 – 4.0 8.0 7.9 11.0 1.2 11.4M4 M4 WNPA 11 0.4 – 4.0 8.0 7.9 11.0 1.2 11.4M5M6M5 WNPA 16 0.9 – 5.914.0 1.0 16.0M5 WNPA 22 4.0 – 10.0 9.7 9.614.0 0.9 20.6M5 WNPA 25 7.9 – 15.0 14.0 1.3 25.2M6 WNPA 15 0.4 – 4.016.0 1.3 14.7M6 WNPA 19 4.7 – 8.7 12.8 12.716.0 1.3 19.0M6 WNPA 25 6.4 – 11.5 16.3 2.0 24.7M8 M8 WNPA 15 0.4 – 4.0 16.0 15.9 21.5 3.2 18.3Large flat headThread Order code Grip range Hole-+ 0.1 d D S LM3 M3 WNPL 25 9.5 – 13.0 6.2 6.1 14.0 0.9 24.0M4 M4 WNPL 13 0.4 – 4.4 8.0 7.9 19.1 1.5 12.7M5M5 WNPL 16G 0.8 – 5.819.0 4.7 16.39.7 9.6M5 WNPL 16J 0.8 – 5.8 19.0 2.0 16.0M6 M6 WNPL 15 0.8 – 4.7 12.8 12.7 19.1 4.8 16.326www.kvt-fastening.com
Fasteks filko ®www.kvt-fastening.com27
Hand toolsPNT 110• Hand pliers for installing smaller series• Suitable for repairs and laboratory purposes• Weight: 0.68 kg• Suitable for:<strong>Blind</strong> <strong>rivet</strong> <strong>nuts</strong>AluminumSteelStainless steelThread sizesM3/M4/M5/M6M3/M4/M5/M6M3/M4/M5• Standard set: M3/M4/M5/M6DFS 309 T• Hand tool for inserting blind <strong>rivet</strong> <strong>nuts</strong> and blind<strong>rivet</strong> bolts• Weight: 2.4 kg• Suitable for:<strong>Blind</strong> <strong>rivet</strong> <strong>nuts</strong>Steel/AluminumStainless steel<strong>Blind</strong> <strong>rivet</strong> boltsThread sizesM4 – M8M4 – M8Thread sizesM5 – M8• Complete set in aluminum case 3080KS 08• Hand tool for inserting FASTEKS FILKO ® andecosyn ® -BCT blind <strong>rivet</strong> <strong>nuts</strong>• Weight: ca. 1.7 kg• Suitable for:<strong>Blind</strong> <strong>rivet</strong> <strong>nuts</strong>Steel/AluminumStainless steelThread sizesM4 – M8M4 – M8• Standard set: M5 – M828www.kvt-fastening.com
Fasteks filko ®Pneumatic-hydraulic toolsTechnicaldataPNT XT 20 <strong>KVT</strong> 810Usuable forinserting blind<strong>rivet</strong> bolts, too.<strong>KVT</strong> 912Usuable forinserting blind<strong>rivet</strong> bolts, too.Weight 1.7 kg 1.88 kg 1.99 kgOperatingpressure5 – 7 bar 5 – 7 bar 5 – 7 barTensile force(at 6 bar)10 kN 19.2 kN 30 kNStroke length 0 – 5.0 mm 0 – 6.0 mm 0 – 6.0 mmAir consumption(at 7 bar)about0.9 l / Hubabout1.8 l / Hubabout2.5 l / HubApprox. height 155 mm 160.5 168Approx. length 291 mm 344 354Equipment without M5 – M8 M8 – M12Thread sizesTool Material M3 M4 M5 M6 M8 M10 M12PNT XT 20AluminumSteelStainless steel<strong>KVT</strong> 810AluminumSteelStainless steel<strong>KVT</strong> 912AluminumSteelStainless steelRecommended working rangePossible working rangeOutside of the possible working rangeLimited working range depending on air pressure, shankshape, grip range/plate thickness (enquire/carry out trials)www.kvt-fastening.com29
Pneumatic-hydraulic tools74200, stroke controlledTechnical data 74200WeightOperating pressureTensile force (at 5 bar)Stroke lengthApprox. heightApprox. lengthEquipment2.2 kg without equipment5 – 7 bar19.1 kNmax. 7 mm280 mm250 mmwithoutSuitable for:<strong>Blind</strong> <strong>rivet</strong> <strong>nuts</strong>Steel/aluminumStainless steelThread sizesM3 – M12M3 – M1074201, force controlledTechnical data 74201WeightOperating pressureTensile force (at 5.5 bar)Stroke lengthApprox. heightApprox. lengthEquipmentabout 2.1 kg without equipment5 – 7 bar17.65 kN7 mm295 mm300 mmwithoutSuitable for:<strong>Blind</strong> <strong>rivet</strong> <strong>nuts</strong>Steel/aluminumStainless steelThread sizesM3 – M8M3 – M830www.kvt-fastening.com
<strong>KVT</strong>-<strong>Fastening</strong> – <strong>Fastening</strong> technology<strong>Blind</strong> <strong>rivet</strong> <strong>nuts</strong><strong>Blind</strong> <strong>rivet</strong> technologyThread insertsSelf-clinchingfastenersStud welding systems 1)Lock <strong>nuts</strong>Bonding fastenersAccess solutionsQuick fasteningelements and clipsQuick release pinsand spring plungersAdhesives andsealants 1)Installation technologyConstructionfasteners 2)Quick connectors 4)<strong>Sp</strong>ecial processes 2)PlugsPressure intensifiers 3)<strong>Fastening</strong>, sealing and flow control solutions for complexapplicationsThe extensive <strong>KVT</strong>-<strong>Fastening</strong> portfolio offers optimal solutionsfor your most challenging applications. The products included inthis catalog represent only a selection from our entire productportfolio. Upon request, we will be pleased to provide additionalinformation or an individual consultation to you.Intelligent logistic systemsBossard SmartBin and SmartLabel areintelligent logistics systems which monitorstock with total reliability and ensurestock replenishment automatically.An online system transmits the datato our server, and this – if necessary –triggers an order. These systemsensure quick and easy availability ofC-parts while production is running.Logistic systemsFor more information about our rangeof products and order at our E-shop,please visitwww.kvt-fastening.comCompetent analysis for efficientsolutions<strong>KVT</strong>-<strong>Fastening</strong>’s highly qualified expertsanalyze the given task at hand.Based on this sound understanding ofthe project, they then develop idealsolutions that are economical, efficient,and safe.Solutioneering1)Not available in Germany. 2) Only available in Switzerland. 3) Not available in Switzerland. 4) Not available in Austria.
<strong>KVT</strong>-<strong>Fastening</strong> AGDietikon/Zürich | SwitzerlandTel: +41 44 743 33 33info-CH@kvt-fastening.comwww.kvt-fastening.ch<strong>KVT</strong>-<strong>Fastening</strong> GmbHIllerrieden | GermanyTel: +49 7306 782 - 0info-DE@kvt-fastening.comwww.kvt-fastening.de<strong>KVT</strong>-<strong>Fastening</strong> GmbHAsten/Linz | AustriaTel: +43 7224 67 09 0info-AT@kvt-fastening.comwww.kvt-fastening.at<strong>KVT</strong>-<strong>Fastening</strong> <strong>Sp</strong>. z o.o.Radom | PolandTel: +48 58 762 17 80info-PL@kvt-fastening.comwww.kvt-fastening.pl<strong>KVT</strong>-<strong>Fastening</strong> S.R.L.Bucureşti | RomaniaTel: +40 37 1381155info-RO@kvt-fastening.comwww.kvt-fastening.ro<strong>KVT</strong>-<strong>Fastening</strong> spol. s.r.o.Bratislava | SlovakiaTel: +421 9 11102510info-SK@kvt-fastening.comwww.kvt-fastening.sk<strong>KVT</strong>-Tehnika pritrjevanja d.o.o.Ljubljana | SloveniaTel: +386 1 2808019info-SI@kvt-fastening.comwww.kvt-fastening.si<strong>KVT</strong>-<strong>Fastening</strong> s.r.o.Brno | Czech RepublicTel: +420 547 125200201info-CZ@kvt-fastening.comwww.kvt-fastening.cz<strong>KVT</strong>-<strong>Fastening</strong> Kft.Budapest | HungaryTel: +36 1 769 0925info-HU@kvt-fastening.comwww.kvt-fastening.huwww.kvt-fastening.com©<strong>KVT</strong> / FASTEKS FILKO ® <strong>Blind</strong> <strong>rivet</strong> <strong>nuts</strong> / EN / 02-2015 / qu / We reserve the right to make changes
Change language