Perfect Match: Best Management Practices - MCS

More documents

Recommendations

Info

Slot 1Slot 6Slot 12Put the Pieces were they BelongCameraSlot 2Inserter collatorSlot 16Insert Station Slot 161. Jam occurs at slot 24 (before diverter) 3 piecesjammed up.2. All 3 pieces are addressed with the inkjet. If theoperator places these pieces on the conveyor, thePerfect Match system has marked them asremoved because they did not trigger the sensoron slot 25. This can cause doubles, because thepieces might be reprinted.3. Every piece removed in the yellow area should beplaced in the piece removed bin.4. The diverter is used for misreads that make itthrough the system without jams and QC pieces(Sequence checking etc.).Slot 19Turn Over Station Slot 19JamInkjet and Camera BaseSlot 19-23Inkjet Slot 22Slot 25Diverter Slot 24
OperationsProcedures for Operators• When does the operator get briefed on the purpose of thePerfect Match job? (Read and Print? 2 Way Match?Sequential Match?) Who briefs them?• What condition does the operator ask for help (i.e.. Howmany misreads, How many jams)?• Does the operator do manual reworks during the job? Forthe purpose of productivity, and integrity, we recommendrework at the end of a shift or the job, which ever comesfirst.
Page 1 and 2: Your customers are paying for highe
Page 3 and 4: Most Common Ways to inadvertently o
Page 5 and 6: PeopleAssign a team for your Camera
Page 7 and 8: OperationsWhat is the procedure to
Page 9: Slot 1Slot 6Slot 12Jams: Remove, Up

Perfect Match: Best Management Practices - MCS

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?