Wind River Diab Compiler Release Notes, 5.9.2 - Embedded Tools ...

Wind River Diab CompilerRelease Notes, 5.9.2-Xcomdat-off has not been supported since 5.9.1. The new C++ ABI requiresCOMDAT support to correctly implement the semantics of the language.3. System RequirementsThis section lists the minimum requirements for the Wind River Diab Compilerwhere the host and target are separate computers.3.1 Host System RequirementsWindows HostThe host is the computer on which you do your development work. This sectionlists the minimum requirements for running the Wind River Diab Compiler in thestandard configuration.These system requirements are for the Wind River Diab Compiler only; they do nottake into consideration any other software you are running on the host computer.■■■■■■■■■■■One of the following:– Microsoft Windows XP Professional (Service Pack 2 or 3), x86-32– Microsoft Windows Vista Business, x86-32– Microsoft Windows Vista Enterprise, x86-32– Microsoft Windows 7, x86-32/64Administrator rights.Monitor capable of displaying 1024 x 768 @ 16 bpp or better.Intel Pentium 4 class computer with a 2 GHz processor, or a computer withhigher performance.1 GB of RAM (2 GB of RAM is recommended for larger projects).500 MB disk space for installing all supported architectures. Installing a subsetof supported architectures will require less disk space. When calculating theamount of disk space needed, be sure to reserve space for your ownapplications and development.A local DVD-ROM drive or access to a network for installation.A current version of a standards-compliant Web browser.TCP/IP must be installed on the host system, even if it is being used as astandalone PC with a serial connection to the target.A network interface card for debugging over a network (recommended).An active Internet connection is recommended during initial installation toaccess patches, documentation, and other important information from theWind River Online Support Web site. (See 1.2 Latest Release Information, p.2.)8