DAFTAR PUSTAKA Andrew Ciesielski, (1999) - USU Institutional ...

DAFTAR PUSTAKA
Andrew Ciesielski, (1999) “Introduction to Rubber Technology” , Rapra
Technology Limeted United Kingdom.
Avella , M La Rota ,G. Martuscelli , E, Raimo,M, Sadaco, P Elegar , G and
Riva R (2000) ,” Poly (3 –Hydroxylbutyrate-co-3-Hydroxyvalerate) and
Wheat Sraw Fiber Composites : Thermal Mechanic Properties and
Biodegradation Behevior , Jurnal of Material Science, 35: 829-836.
Bahrudin, (2010), “Pembuatan Termoplastik – Elastomer Dari Campuran
Karet Alam Dan Polipropilena”, http//digilib.its.ac.id .6/25/2010
Budiman, AFS., (2002),” Recent Development in Natural Rubber Prices”.
FAO. Consultation on Agricultural Commodity Price Problems Rome
(2526 March)
Bahruddin Sumarno, G. Wibawa dan N. Soewarno , (2007), “Morfologi Dan
Properti Campuran Karet Alam/Polipropilena Yang Komposit
Natural Rubber/Polipropilena”, Seminar Nasional Teknik Kimia
Indonesia – SNTKI PP (ISBN 978-979-98300-1-2)
Bahruddin, Ida Zahrina, Said Zul Amraini ,(2009),” Pengaruh filler Carbon
black Terhadap Sifat dan morfologi Komposit natural
Rubber/Polypropilene” ,proceding Seminar Nasional teknik Kimia
Indonesia, ISBN 978-979-98300-1-2 Bandung.
Bussaya Rattanasupa and Wirunya Keawwattana,(2007) ,” The Development
of Rubber Compound based on Natural Rubber (NR) and Ethylene-
Propylene- Diene-Monomer (EPDM) Rubber for Playground Rubber
Mat”, Kasetsart J. (Nat. Sci.) 41 : 239 – 247
Bukit, Nurdin , (2004),”Pengujian Sifat Mekanik Karet SIR 20 Terhadap
Bahan Pengisi Carbon Black Dari Tempurung Kelapa “,Laporan
Reseacrch Grand Sp4 Jurusan Fisika FMIPA Unimed.
Bukit,Nurdin ,Rugaya ,(2009) ,”Sintesis carbon dari limbah Perkebunan Desertai
analisis Penggunaanya Sebagai Filer material kompon Karet dan Breket
Arang” Laporan Penelitian Hibah Bersaing DIKTI
Basuki Wirjosentono, (1995), “Analisis dan Karakterisasi Polimer” . USU Press
Brydson, J.A., (1989), “Plastic Materials”. 5 ed. London : Mid-County Press
Inc. (196- 241).
Cheremisinoff, N.P. © 1996,” Polymer Characterization - Laboratory
Techniques and Analysis “,William Andrew Publishing .
Universitas Sumatera Utara

Charles E. Carraher, Jr,(2003),” Essential Materials for Everyday Living and
Problem Solving”, Second Edition, John Wiley & Sons, Inc.
C. Rosales, L. Marques, J. Gonzales, R. Perera, B. Rojas, M. Vivas,(1996)
“Free radical grafting of diethylmaleate on linear low-density
polyethylenes”, Polym. Eng. Sci, 36 , 2247-2252.
Cho, J.W., Logsdon, J., Omachinski, S., Qian, G., Lan, T., Womer, T.W. and
SmithW.S,(2000)., “ Nanocomposites: A Single Screw Mixing Study of
Nanoclay-filled Polypropylene”. ANTEC 2000 Conference Proceedings,
May 8-9, . Orlando. Florida, Society of Plastics Engineers (SPE). 2000.
58(1), 428.
Chayanoot Sangwichien, Panita Sumanatrakool and Orasa
Patarapaiboolchai,(2008), ”Effect of Filler Loading on Curing
Characteristics and Mechanical Properties”, of Thermoplastic
Vulcanizate”, Chiang Mai J. Sci. ; 35(1) : 141-149 .
Chai Mee Kin , Asiah Hussain,dan Zainab Ramli,(2001) , “Penentuan kapasiti
dan jenis pencerapan Zeolit asli terhadap bahan pencelup sintetik”
Malaysian Journal of Analytical Sciences, Vol. 7, No. 1 (2001) 69-79
Choucihary, N.R. Chaki, T.K., Dutta, A. and Bhowmick, A.K. (1989). Thermal,
X- ray and Dynamic Mechanical Properties of TPE NR/PE Blends.
Polymer. 30: 2047-2053.
David I. bower, (2002),” An Introduction to Polymer Physics”, Cambridge
University Press.
D. Munteanu, Chapter 5 (1997): “Moisture cross-linkable silane-modified
polyolefins, in Reactive Modifiers for Polymers”, (Ed. S. Al-Malaika),
Blackie Academic & Professional, London , 196-265.
Dong, W., Zhang, X., Liu, Y. Gui, H., Wang, Q., Gao, J., Song, Z., Lai, J.,
Huang, F., Qiao, J. (2006) ,”Effect of rubber on properties of nylon-6 /
unmodified clay / rubber Nanocomposites”, European Polymer
Journal, 42, 2515-2522.
Ellul,M.D.dan D.R Hazelton, (1994) ,“ Chimical Surface Treatments of Nutural
Rubberand EPDM Thermoplastic Elastomers : Efect on friction and
Adhession” ,Rubber Chem.Technol ,67 hal 582-601.
Etty Marti Wigayati, 2009, Pembuatan Nanopartikel LixMn2O4 , Jurnal Teknologi
Indonesia LIPI Volume 32 ,no 2;107-113
Feng, M., Gong, F., Zhao, C., Chen, G., Zhang, Sand Yang, M. (2004)
“ Effect of Clay on the Morphology of Blends of Polypropylene and
Polyamide 6/Clay Nanocomposites”, Polymer International 53, 1529-1537
Universitas Sumatera Utara

Frounchi, M., Dadbin, S., Salehpour, Z., Noferesti, M. (2006),” Gas barrier
properties of PP/EPDM blend nanocomposites.” Journal of Membrane
Science, 282, 142-148.
Coran , A ,Y and. R.Patel ,(1981)” Elastoplastic Compositions of Cured Diene
Rubber and polypropylene”U.S Paten No 4,271,049
Garcia-Lopez, D., Picazo, O., Merino, J.C., and Pastor, J.M. (2003).
“Polypropylene- clay nanocomposites: effect of compatibilizing agents on
clay dispersion”. European Polymer Journal. 39: 945-950.
Halimatuddahliana, H. Ismail, H. Md. Akil, (2004), “Rheological Properties of
Polipropilena/EthylenePropylene Diene Terpolymer/Natural Rubber
(PP/EPDM/NR) Blends by Torque Rheometer”, Jurnal Teknologi Proses,
3, hal. 77-86
Halimatuddahliana,indra Surya , Maulida , (2008), “ Modifikasi Elastomer
TermoplastikPolipropilena/karet alam (PP/NR) dengan proses
Pemulkasian Dinamik “, Jurnal Penelitian Rekayasa Volume 1,No 2
Desember
Hull,D,(1992), “An Introduction to Composite Material” , Cambridge
University Press, London ,
Hanafi Ismail, Halimatuddahliana and Hazizan. Md. A ,2005,” Properties Of
Polypropylene/Ethylene-Propylene Diene
Terpolymer/Natural Rubber (Pp/Epdm/Nr) Ternary Blend:
The Effect Of Dynamic Vulcanization”, Solid State Science and
Technology, Vol. 13, No 1 & 2 (2005) 184-194
http//digilib.its.ac.id .6/25/2010, “Pengaruh Komposisi maleated polypropilene
terhadap properti Blend Natural Rubber dan polypropilene yang diproses
secara vulkanisasi Dinamik”.
Hasegawa, N., Kawasumi, M., Kato, M., Usuki, A. and Okada, A. (1998).
“Preparation and Mechanical Properties of Polypropylene-Clay
Hybrids Using a Maleic Anhydride-Modified Polypropylene
Oligomer”. Journal of Applied Polymer Science. 67: 87-92.
Ismail,H,Salmah, Nasir M.(2001) .”Dynamic vulcanization of rubber wood –
filled polypropylene/natural rubber blends “,polymer testing. 819-823.
Ismail,H,Suryadiansah .(2002) .”Termoplastic vulcanizates based on
polypropylene/natural and polypropylene /recycle rubber blends”
,Polymer testing. 389-395.
Universitas Sumatera Utara

Ismail,H,Salmah, Nasir M.(2003), “The Effect of Dynamic Vulcanization on
mechanical Properties and Water Amsorbsi of Silika and Rubber wood
Filled polypropylene/Nutural Rubber Hybrid Composites” ,
Inter,J.Polym, Mater.53(3) : 229-238
.
Ismail, H. and Suryadiansyah, R. (2004), Effects of filler on properties of
polypropylene-natural rubber-recycle rubber powder (PP-NR-RRP)
composites, J. Reinforced Plastics and Composites., 23, 639-650.
James E. Mark, BurakErman, (2005), “ Scince and tecnology of rubber”,
Elseiver Academic press Inc All rights reseved USA.
J. W. Lim, A. Hassan, A. R. Rahmat, M. U. Wahit, (2005), “Rubber-
Toughened Polipropilena Nanocomposite: Effect of Polyethylene Octene
Copolymer on Mechanical Properties and Phase Morphology”, Published
online 19 January 2006 in Wiley InterScience
Krishnamoorti, R., Giannelis, E. P. (1997) Rheology of end-tethered polymer
layered silicate nanocomposites. Macromolecules, 30, 4097-4102.
Kun-Jun Hwang, Jin-Woo Park, Il Kim, and Chang-Sik Ha*,(2006),” Effect of
a Compatibilizer on the Microstructure and Properties of Partially
Biodegradable PP /Aliphatic Polyester/Organoclay Nanocomposites”
Macromolecular Research, Vol. 14, No. 2, pp 179-186.
Kuriakose, B. and De, S.K. (1985),” Studies on the melt flow behavior of
thermoplastic elastomers from polypropylene-natural rubber blends,
Polym. Eng. Sci., 25, 630- 634.
Karian, H.G. (1999). “Handbook of Polipropilena and Polipropilena
Composites”, nd2. New York, Marcel Dekker,
K. Kosonmetee, P. Laokijeharoen , V.Tanrattanukul,(2007) ,” Tensil properties
of thermoplastic vulcanizateprepared from polypropylene and natural
rubber”CRRI & IRRDB Iternational Rubber Conference .Siem Reap ,
Cambodia.
Kurokawa, Y., Yasuda, H., Kashiwagi, M., and Oya, A. (1997). “Structure and
properties of a montmorillonite/polipropilena nanocomposite “, Journal
of Materials Science Letters. 16: 1670-1676.
Kusmono, Z. A. Mohd Ishak, W. S. Chow, T. Takeichi Rochmadi , (2008),
“Enhancement of properties of PA6/PP nanocomposites via organic
modification and compatibilization 1M.”
Ketan, K. Maniar (2002), “A Literature Survey On Nanocomposites”,
University of Massachusetts Lowell: Master of Science Thesis.
Universitas Sumatera Utara

Kim,H,S.,Lee,B,H.,Choi,S,W.,Kim,S.,Kim,H.J.(2007) ,”The Efect of Types of
Maleic Anhydride-Grafted polypropylene (PP-g-MA) on the Interfacial
Adhesion Properties of Bio-Flour-Filled Polypropylene Composites. “
Composittes ,38(A);1473- 1482 .
Kinsuk Naskar, (2004) “Dynamically vulcanized PP/EPDM thermoplastic
elastomers” , Ph.D. Thesis, University of Twente, Enschede, The
Netherlands 2
K. Chatterjee, K. Naskar,(2007),” Development of thermoplastic elastomers
based on maleated ethylene propylene rubber (m-EPM) and polypropylene
(PP) by dynamic vulcanization,” Express Polymer Letters Vol.1, No.8
,527–534
Kohls,J.L, and Beaucage,(2002) , Rational Desing of Reinforced Rubber , Cur
OP.Solid St Mat Sci ,6:183-194.
Lee, D.C. and Jang, L.W. (1996).” Preparation and characterization of
PMMA-clay hybrid composite by emulsion polymerization”. Journal of
Applied polymer Science. 61: 1117-1122.
Lew, C.Y., Murphy, W.R., and McNally, G.M. (2004).” Preoaration and
Properties of Polyolefin-Clay Nanocomposites”. Polymer Engineering
Science. 44: 10271035.
Leszczyn ska, J. Njuguna, K. Pielichowski, J. R. Banerjee, (2007),”
Polymer/montmorillonite nanocomposites with improved thermal
properties. Thermochimica Acta, Volume 454, Issue 1, 15 February,
Pages 1-22.
Lim Jian Wei ,2006, “Development Of Layered Silicates
Montmorillonite Filed Rubber-On-Toughened Polypropilene
Nanocomposite (RTPPNC)” ,Thesis Faculty of Chemical and Natural
Resources Engineering Universiti Teknologi Malaysia
Lynch, J.C.(2000). “Impact Modification of Polipropilena as a Function of
Rubber Toughening Parameters”. Rensselaer Polytechnic Institute Troy,
New York, PhD Thesis arcel Dekker.
Li. Y.M. (2001). Mechanical Behavior of Multi-Phase Clay-Modified Polypropylene
Blend Systems. Texas A&M University: Doctor of Philosophy.
Li, Y., Zhang, Y., Zhang, Y.X. (2004). “Morphology and mechanical
properties of HDPE/SRP/elastomer composites: effect of elastomer
polarity”. Polymer Testing 23: 83-90.
Liang, J.Z. and Li, R.K.Y. (2000). “Rubber Toughening in Polypropylene: A
Review”. Journal of Applied Polymer Science. 77: 409-417.
Universitas Sumatera Utara

Lew, C.Y., Murphy, W.R., and McNally, G.M. (2004). Preoaration and Properties
of Polyolefin-Clay Nanocomposites. Polymer Engineering Science. 44:
10271035.
Leblance,J,R.(2002). Rubber-filler Interaction and Rheology properties in
Filled Coumpaund, Prog .Polym . Sci 27:627-687.
Ma, J.S., Qi, Z.N., and Hu, Y.L. (2001). “Synthesis and Characterization of
Polypropylene/Clay Nanocomposites”. Journal of Applied Polymer
Science. 82: 3611-3617.
Mashuri, Ana Marini,dan Sudirman,(2005), “Pengaruh Anti Oksidan
Terhadap Kestabilan Sifat Fisis Bahan Polipaduan Polipropilena-Karet
Alam; I. Studi Morfologi dan Sifat Mekanik”, Jurnal Fisika Dan
Aplikasinya, Volume 1, Nomor 2
Mikrajuddin Abdullah,Khairurrijal ,(2010),”Karakteristik Nanomaterial ”, CV
Rezeki Putra Bandung.
Mangaraj, D., (2005), “Rubber Recycling by Blending with Plastics”, in De,
S.K., Isayev, A.I., and Khait, K (Ed.). Rubber Recycling, Taylor &
Francis, New York, hal. 18- 25
Mu Mu Htay, Mya Mya Oo, (2008),”Preparation of Zeolite Y Catalyst for
Petroleum Cracking”, World Academy of Science, Engineering and
Technology 48 .
M.M. Redy ,Rahul K, Gupta,S,N.Bhattacarya ,and Rparthasarathy,(2007),”
“Struktur Property relationship of melt intercalated maleated
polyethilene nanocomposites”, Jurnal Rheology Korea-Australia
volume 19,No 3, November ,PP 133-139 .
Makadia, C.M. (2000). “Nanocomposites of Polypropylene by Polymer Melt
Compounding Approach”. University of Massachusetts Lowell: Master of
Science Thesis.
Ma, J., Zhang S., Qi, Z. and Hu, Y. (2002). Crystallization Behaviors of
Polypropylene/Montmorillonite Nanocomposites. Journal of Applied
Polymer Science. 83: 1978-1985.
Maiti, P., Nam, P.H., Okamoto, M., Kotaka, T., Hasegawa, N., Usuki, A. (2002a).
Influence of Crystallization on Intercalation. Morphology, and
Mechanical Properties of Polypropylene/Clay Nanocomposites.
Macromolecules, 35: 2042-2048.
Universitas Sumatera Utara

Maiti, P., Nam, P.H., Okamoto, M., Kotaka, T., Hasegawa, N., Usuki, A. (2002b).
The Effect of Crystallization on the Structure olypropylene/Clay
Nanocomposites. Polym Engng Sci. 42:1864-1871.
Nam, P.H., Maiti, P., Okamoto, M., Kotaka, T., Hasegawa, N. and Usuki, A.
(2001). A hierarchical structure and properties of intercalated
polypropylene/clay nanocomposites. Polymer. 42: 9633-9640.
Nuyah , ( 2009), “Penentuan Formulasi Karet pegangan stang (Grip Handle )
Dengan Menggunakan Karet Alam dan Sintetis Berdasarkan SNI 06 –
7031 – 2004”, Balai Riset dan Standardisasi Industri Palembang .
N .Othman,N.Zahhari,( 2010),”Optimization of Zeolite as Filler in
Polypropylene Composite”,sega jurnal on line.
Nakason, C., Saiwari, S., Kaesaman, A., (2006), “Thermoplastic
Vulcanizates Based on Maleated Natural Rubber/Polipropilena Blends:
Effect of Blend Ratios on Rheological, Mechanical, and Morphological
Properties”, Polymer Engineering and Science, 46, hal.594-600.
Nadras Binti Othman ,2007 ,”Characterrisation And Properties Of
Bentonite/Polypropilene Composite”,desertation PhD
Universiti Sains Malaysia.
Nowacki, R., Monasse, B., piorkowska, E., Galeski, A., Haudin, J.M. (2004).
Spherulite nucleation in isotactic polypropylene based nanocomposites
with montmorillonite under shear. Polymer, 45: 4877-4892.
Octavia,(2010)” Pengaruh komposisi kompatibiliser Maleated polypropilene
terhadap properti Blend Natural Rubber dan polypropiline yang
diproses secara Vulkanisasi Dinamik”, http//digilib.its.ac.id
.6/25/2010 .
Pracella, M .Chionna, D Anguillesi ,I, Kuliski , S, and Piorkowska,E
(2006).”Functionalization compatibizer and properties of Polypropylene
Composites With Hemp fibers “ , Composite Scince Tecnology , 13:2218-
2230
Pakpun Phewphong,(2007),” Silica reinforcement in chlorinated
polyetylene/naturalrubberBlends”, Faculty of graduate studies , Thesis
Mahidol University Tailand.
Peter A. Ciullo R.T. Vanderbilt Company, Inc. Norwalk, Connecticut Norman
Hewitt PPG Industries, Inc. Pittsburgh, Pennsylvania,(1999), “The
Rubber Formulary” Published in the United States of America by Noyes
Publications/William Andrew Publishing, LLC 13 Eaton Avenue,
Norwich, New York 13815 .
Universitas Sumatera Utara

Paul, S., and Kale, D.D. (2000). “Impact Modification of Polypropylene
Copolymer with a Polyolefinic Elastomer’. Journal of Applied Polymer
Scienc. 76: 14801484.
Pocut Nurul Alam, Teuku Rihayat,(2007), “Sintesa dan Karakteristik Sifat
Mekanik Karet Nanokomposit”, Jurnal Rekayasa Kimia dan Lingkungan
Vol. 6, No. 1, hal. 1-6.
R Rastago Sisakht Mohsen , Nouuri Khorasani Saied , Zadhouseh Ali , 2009,”
Theoritical and Experimental Determination of Tensil Properties of
Nanosized and Micron-sized CaCO3 /PA66 Composites “ , Polymer
Composites ,30,3 ,274Pro Ques science Journal
Rahmat Saptono ,(2008),” Ilmu Pengetahuan Bahan”, Departemen of
Metallurgi and material fakultas Teknik UI
Robert Eller, (2007),” And The Rubber Interface Global Perspectives On
TPE Markets, Growth Ttrends, RMA/EPG Annual Meeting” .
Roger Brown ,(2002),”Handbook of Polymer TestingRapra”, T First Published
by Rapra Technology LimitedShawbury, Shrewsbury, Shropshire, SY4
4NR, UK.
Ratu Evina Dibyantini ,Eddiyanto ,(2009),” Studi Pemanfaatan Ban Bekas
(Post Consumer Rubber) Sebagai Filler dan Binder Pada Pencampuran
Reaktif Dengan Karet Alam (SIR- 20) dan Nitrile Rubber”, laporan
Penelitian Hibah Penelitian Strategis nasional FMIPA UNIMED.
Ray, S.S., and Okamoto, M. (2003).” Polymer/layered silicate
nanocomposites: a review from preparation to processing”. Progress
in Polymer Science. 28: 1531641.
Raj .R .G Kokta ,B V dan Denault ( 1990) . “ The use of Isocyanate as a
Bonding Agent to Improve the Mechanical Properties of PE wood
fiberes Composites “. Intern ,J.Polym Mater , 18: 213-235 .
Reichert, P., Nitz, H., Klinke, S., Brandsch, R., Thomann, R., and Mulhaupt, R.
(2000). “ Poly(propylene)/organoclay nanocomposite formation:
Influence of compatibilizer functionality and organoclay
modification”. Macromol. Mater. Eng. 275, 8-17.
Richardson,T , (1987), “Composite A Design Guide” ,Industrial Press,New York.
Ragunathan Santiagoo, Hanafi Ismail and Kamarudin Hussin,(2010),” The
Effect of Polypropylene Maleic Anhydride (PP MAH) on Properties of
Polypropylene (PP)/Recycled Acrylonitrile Butadiene Rubber (NBRr)/
Rice Husk Powder (RHP) Composites” Pertanika J. Sci. & Technol. 18
(2): 427– 432.
Universitas Sumatera Utara

Rohani Abdul Majid, Hanafi Ismail, and Razaina Mat Taib,(2010),” Effects of
Polyethylene-g- maleic Anhydride on Properties of Low Density
Polyethylene/Thermoplastic Sago Starch Reinforced Kenaf Fibre
Composites”Iranian Polymer Journal 19 (7), 2010, 501-510.
Sabu Thomas, Ranimol Stephen (2010),” Rubber Nanocomposites Prepara
Tion, Properties, And Applications”, John Wiley & Sons (Asia) Pte L
td, 2 Clementi Loop, Singapore .
Sperling,LH,(2006), “ Intruduction to physical polymer scince”, edition 4
,John Wiley & Sons, inc.publication New Jersey.
Steven.Malcom P ( Terjemahan Iis Sopyan) ,( 2001) , “Kimia Polimer” ,Edisi 1
PT Pradnya Paramita Jakarta .
Supri A.G, H. Salmah, and K. Hazwan , (2008), “Low Density Polyethylene-
Nanoclay Composites: The Effect of Poly(acrylic acid) on Mechanical
Properties, XRD, Morphology Properties and Water Absorption”
Malaysian Polymer Journal (MPJ) Vol 3 No. 2, p 39-53.
Supong Arunvisut, Sutthipat Phummanee, Anongnat
Somwangthanaroj,(2007), “ Effect of Clay on Mechanical and Gas
Barrier Properties of Blown Film PP
/Clay Nanocomposites”, Published online 25 July 2007 in Wiley
InterScience (www.interscience.wiley.com) .
Samuel Pati seda , Hen Saputra , Ade Sholeh H, Mochamad Rossjidi,Anwar
Mustafa,(2005), “Prospek Aplikasi Produk Berbasis Zeolit Untuk Slow
Release Subtances (SRS) dan Membran “, Jurnal Dasar Dasar Teknik
Kimia .
Sabet, S.A. and Datta, S., (2000), “Thermoplastic Vulcanizates”, in Paul,
D.R. & C.B. Bucknall (Ed.). Polymer Blends, Vol. 2, John Wiley &
Sons, hal. 517555.
Soeseno,Soewati (1978), “Pedoman Pengujian sifat mekanik karet mentah
“,Balai Penelitian Perkebunan Bogor, Bogor .
Sonia Zulfiqar, Muhammad Rafique, Muhammad Sajjad Shaukat1,
Muhammad Ishaq and Muhammad Ilyas Sarwar ,(2009) “ Influence of
clay modification on the properties of aramid-layered silicate
nanocomposites, Colloid and Polymer Science “Springer-Verlag .
Setiadi dan Astri Pertiwi,(2007) , “ Preparasi Dan Karakterisasi Zeolit Alam
Untuk Konversi Senyawa ABE Menjadi Hidrokarbon”, Prosiding
Konggres Dan Simposium Nasional Kedua MKICS 2007 ISSN : 0216
– 4183.
Universitas Sumatera Utara

Sotya Astutiningsih, Pandu Lanang Kinasih, dan Arief Cahyo Wibowo ,(2009),
“Stabilitas Termal Galeri Clay Pada Komposit Nano Polipropilena -
Clay Montmorillonit Dengan Pengkompetabel Polipropilena grafting
Maleik Anhidrida”, Makara, Teknologi, Vol. 13, No. 1, April : 19-24.
Sudirman , Aloma K. K.I, Ari H.I, Bambang Sugeng, Betha dan
Mashuriz,(2000), “Pengaruh Komposisi Filler Terhadap Struktur Mikro
dan Desinsitas Komposit Polipropilena -Pasir” ,J. Mikroskopi dan
Mikroanalisis VoL3 No.2 2000 /SSN /4/0-5594 .
Suttati, M dan Rachmawati ,M (1994) , “Zeolit Tinjauan Literatur” , Pusat
Dokumentasi dan Informasi Ilmiah LIPI Jakarta .
Salmah .( 2005) ,”Pencirian dan Sifat-Sifat Komposit Polipropilena(PP) /
Etilena propilena Diena Monomer (EPDM) Terisi Sludge Kertas “
,” Desertasi Universiti Sain Malaysia.
Sinto Jacob, Suma K.K. Sona Narayanan, Abhilash G, Jude Martin Mendez
K.E.George,(2010),” Maleic anhydride modification of PP/silica
nanocomposites”,International Conference on Advances in Polymer
Technology, Feb. 26-27, 2010, India, Page No. 223.
Sebayang ,P .Mulyadi, Anggito P.Tetuko, 2009,” Pembuatan Bahan filter
Keramik Berpori Berbasis Zeolit Alam dan Arang Sekam padi” , Jurnal
Teknologi Indonesia LIPI Volume 32 ,no 2.
Sichina, WJ. (1994). “Prediction of End-use characteristics of Polyethylene
Materials Using Differential Scanning Calorimetry”. USA: Application
Briff DSC-11.
Terra Sports Technology BV,(2006), “Differences between EPDM based
ond TPE/TPV based infill systems for artificial turf.” Sittard, The
Netherlands.
Tengku Faisal Zulkifli Hamid , (2008),” Pengaruh modifikasi Kimia Terhadap
Sifat-Sifat Komposit Polietilena Densitas Rendah (LDPE) terisi
Tempurung Kelapa “, Tesis Sekolah Pasca Sarjana USU Medan.
Tserki . V. Patzinos .P Da Panayiotou ,C (2006) ,”Novel Biodegradable
Composites based on Treated Lignacellulosic wasre Flour as Filler . Part
II Development of Biodegradable Composite Using Treated and
Compatiblized waste flour” . Composit Aplpled Scince and Manufacturing
. 37: 1231-1238 .
Tinker,A.j.R.D Icenogle and I.whittele ,(1989) , “ Natural Rubber Based
TPEs”, Rubber World , 199 hal 25-29 .
Universitas Sumatera Utara

Tang H. (2000). “Novel Polyolefin Elastomer-Based Blends and Their
Applications”, University of Florida. Doctor of Philosophy Dissertation.
Timothy R. Felthouse, Joseph C. Burnett, Ben Horrell, Michael J. Mummey,
and Yeong-Jen Kuo,(2001) ,” Maleic Anhydride, Maleic Acid, And
Fumaric Acid”, Huntsman Petrochemical Corporation Austin Laboratories
7114 North Lamar Boulevard Austin, Texas 78752-2310 Submitted for
Kirk Online.
T.Laosee,(1998) ,Morphology and Mechanical Properties of Compatibilised
Polypropylene/Vulcanised Rubber Blands,J.Sci.Soc.Thailand,24, 251-264.
Utracki, L.A. (1999),” Polypropylene Blends with Elastomers”. In: Karger-
Koccis, K. Polypropylene: A-Z Reference. Dordrecht: Kluwer
Publishers, 1999; 621.
Usuki, A., Kojima, Y., Kawasumi, Okada, A., Fukushima, Y., Kurauchi, T.,
Kamigaito, O. (1993),” Synthesis of nylon 6-clay hybrid”, Journal of
Materials Resesarch, 8, 11851189.
W. Xu, H. Zhai,H.Guo, N. Whitely and W.-P. Pan,(2004),” PE/ORG-MMT
Nanocomposites Non-isothermal crystallization kinetics”, Journal of
Thermal Analysis and Calorimetry, Vol. 78 .
Weller, M.T. (1994). “Inorganic Materials Chemistry”. Oxford University
Press.Wang, Y., Chen, F.B., Li, Y.C., Wu K.C. (2004a).” Melt processing
of polypropylene/clay nanocomposites modified with maleated
polypropylene compatibilizers. Composites”: Part B. 35: 111–124.
Wang, Y., Chen, F.B., Wu, K.C. (2004b). “Twin-Screw Extrusion
Compounding of Polypropylene/ Organoclay Nanocomposites Modified
by Maleated Polypropylenes.” Journal of Applied Polymer Science. 93:
100-112.
WangY., Chen F.B., and Wu K.C. (2005). “Effect of the molecular weight of
maleated polypropylenes on the melt compounding of
polypropylene/organoclay nanocomposites”. Journal of Applied Polymer
Science. 97: 1667-1680.
W.Michaeli, H.Köppen, Aachen,(2010) ,” Compounding of TPV in Internal
Mixers” Maschinen Und Anlagen Machinery and Equipments.
Xanthos, M.W. Young, G. P. Kafwyannidis, D. N. Bikiaris, “Reactive
Modification of Polyethylene Terephthalate With Polyepoxides”
www.scintag.com ,(1999) ,Chapter 7: Basics of X-ray Diffraction © 1999
Scintag Inc.
Universitas Sumatera Utara