TONO-PEN XL Tonometer

Guidance & Manufacturer’s DeclarationGuidance and manufacturer’s declaration – electromagnetic immunity - PartIThe TONO-PEN is intended for use in the electromagnetic environment specified below. The customer or the userof the TONO-PEN® XL should assure that it is used in such an environment.Immunity testEN 60601test levelCompliance levelElectromagneticenvironment -guidanceElectrostatic discharge(ESD)EN 61000-4-2±6 kV contact±8 kV air±6 kV contact±8 kV airFloors should be wood,concrete, or ceramic tile.If floors are covered withsynthetic material, therelative humidity shouldbe at least 30 %.Power frequency (50/60Hz) magnetic fieldEN 61000-4-83 A/m 3 A/mPower frequencymagnetic fields shouldbe at levels characteristicof a typical location ina typical commercial orhospital environment.Guidance and manufacturer’s declaration – electromagnetic emissionsThe TONO-PEN is intended for use in the electromagnetic environment specified below. The customer or the userof the TONO-PEN® XL should assure that it is used in such an environment.EmissionsRF emissionsCISPR 11RF emissionsCISPR 11Harmonic emissionsEN 61000-3-2Voltage fluctuationsEN 61000-3-3ComplianceGroup 1Class BN/AN/AElectromagnetic environment -guidanceThe TONO-PEN® XL uses RF energy only for itsinternal function. Therefore, its RF emissions are verylow and are not likely to cause any interference innearby electronic equipment.The TONO-PEN® XL is suitable for use in allestablishments, including domestic establishmentsand those directly connected to the public low-voltagepower supply network that supplies buildings fordomestic purpose.Page 20