simatic hmi

Operator Control and Monitoring DevicesSystem interfaces: Panels and runtime softwareThird-party PLCsControllerTarget hardware (PROTOCOL)(physics)Omron (Link/Multi Link)• SYSMAC C(außer CPU CQM1 – CPU 11/21)• SYSMAC a• SYSMAC CV(RS 232)via NT-AL001 converterwith up to 4 PLCs• SYSMAC C(except CPU CQM1 – CPU 11/21)• SYSMAC a• SYSMAC CV(RS 232)with up to 4 PLCs• SYSMAC C(except CPU CQM1 – CPU 11/21)• SYSMAC a• SYSMAC CV(RS 422)Telemecanique (UNI-TELWAY) 6)via TSX SCA62 outlet with TSX 17or TSX 47/67/87/107 (RS 485)via TSX SCA62 + ACC01 outletswith TSX 37/57 (RS 485)via TSX SCA62 outlet andUNI-TELWAY networkwith 4 x TSX 17 or TSX 37/57 orTSX 47/67/87/107 (RS 485)SIMATIC HMITP 170A OP 77BTP 270TP 170BOP 270OP 170BMP 270BMobile Panel 177 DPTP 177B DPOP 177B DPTP 177B DP/PNOP 177B DP/PNMP 370ProTool/ProRuntimeWinCC flexibleRuntime1) Mobile Panel 177 DP connection via special connecting cable and junction box (see Mobile Panel section for MLFBs);see Manual for cables used.2) For TP 177B, OP 177B the RS 422/RS 232 adapter 6GK1 901-1BB10-2AA0 is required3) TP 170A can only be connected to one control unit4) An RS 485 interface card and a suitable cable are required on the PC. Detailed information (board tested, cables used)can be found in the online help for ProTool and in the Communication User Manual for windows-based systems5) Detailed information (cables used) can be found in the online help for ProTool or WinCC flexible and in theCommunication User Manual for Windows-based systems6) Not available with WinCC flexibleConnection via• • 1) 2) • • •See online help 5)• 3) • 1) 2) • • •See online help 5)• 3) • 1) • • – See online help 5)• • 1) 4)• • •6XV1 440-1E...(max. 20 m)• • 1) • • •4) 6XV1 440-1E...(max. 20 m)• 3) • 1) 4)• • •6XV1 440-1E...(max. 20 m)• System coupling is possible– System coupling not possible2Siemens ST 80 · 2006 2/179