simatic hmi

Operator Control and Monitoring DevicesPush Button PanelsSIMATIC PP7■ IntegrationThe push button panels can be connected to• SIMATIC S7-200/S7-300/S7-400, WinAC Software PLC andSlot PLC over MPI and PROFIBUS DP• SIMATIC S5 (S5-95/Master or IM 308C) only overPROFIBUS DP• PROFIBUS DP standard masters from any manufacturers(e.g. Allen Bradley)System interfacesPLC SIMATIC PP7 1)Target hardware (PROTOCOL) Connected via(connector/physical characteristics)SIMATIC S7 / SIMATIC WinAC (MPI as master) 2)using MPI interface tobus connector, bus cableS7-200/S7-300/S7-400/and MPI networkWinAC Software PLC / Slot PLC (see Catalog ST 70/IK PI)(9-pin female connector/RS 485), 3) 4)SIMATIC S5/S7 (PROFIBUS DP as standard slave)using PROFIBUS to max. 1 xS7-200 (CPU 215-DP)using MPI protocolS7-300/-400with integrated PROFIBUS interfaceS7-300 with CP 342-5S7-400 with CP 443-5using PROFIBUS DP toS5-95U /PROFIBUS DP master(6ES5 095-8ME02)S5-115U/S5-135U/S5-155Uwith IM 308C/IM 308BS5-115U/S5-135U/S5-155Uwith CP 5430/CP 5431PROFIBUS 5)(see Catalog ST 70/IK PI)PROFIBUS 5)(see Catalog ST 70/IK PI)Non-Siemens PLCs (PROFIBUS DP master)using PROFIBUS DP PROFIBUS 5)(see Catalog ST 70/IK PI)1) PP7 suitable up to 1.5 Mbit/s2) Standard PG/PC MPI cable cannot be used3) S7-200 only over MPI (CPU 212 not possible)4) S7-200 CPU 215-DP also possible on PROFIBUS DP interface overMPI protocol5) Bus connector: 6GK1 500-0EA02Note:The standard PG/PC MPI cable (6ES7 901-0BF00-0AA0)is not suitable for connecting a PP and a CPU.■ Technical specificationsOperating mode• Control elements• Operating options• Function keys, programmable• Membrane keyboard• Touch screen• Number of keysDigital inputsPP7• Voltage (DC)24 V• Additional digital inputs 4Typ. service life• Short-stroke keys1,500,000(on-off operations)Digital outputsMembrane keyboardKeys8 function keys, 8 with LEDsYesNo8 short-stroke keys• LEDs (ON period) 100 %Functionality• Short-stroke keys/digital inputs as Yespushbutton or switch• Integrated flashing rate for LEDs 0.5 Hz• Pushbutton and lamp test Yes•Max.1000 ms• Enabling inputNo• Max. number of slots for 22.5 mm 5standard elementsInterfaces1 x RS485 max. 1.5 Mbit/sSupply voltage• Permissible range+18 V to +30 V DC• Rated current0.2 ADegree of protection• FrontIP65• RearIP20CertificationCE, FM Class I Div. 2, UL, CSA(some only as options)Mechanical components/dimensions• Front panel W x H (mm) 144 x 204• Mounting cutout/depth W x H x D 130 x 190/53 mm depth of unit(mm)•Weight0.8 kgAmbient conditions• Max. permissible angle of +/- 35°inclination without external fan• Max. relative humidity (in %) 95%•Temperature- Operation (vertical installation) 0 to +55 °C- Operation0 to +55 °C(max. angle of inclination)- Transportation and storage-20 to +70 °CMiscellaneous• Free hotline• Warranty period in yearsFunctionality (under ProTool)Protocols• Interface to PLC(may only be an option)Yes1 yearS5, S7-200, S7-300/400Win AC,SINUMERIK, SIMOTION and othernon-Siemens drivers2Siemens ST 80 · 2006 2/9