NEW KITS FO

Secret Alarm KitThis is the perfect device to scare off someone who opens your desk, dresser, file cabinet, lunchbox, etc. Simply turn the arming switch to the on position. You have a couple of seconds to put yourSecret Alarm in a desk and close the drawer. The next time someone opens it, a loud obnoxiousnoise comes from the horn until unit is reset. Uses sensitive CDS and SCR circuit to respond tolight. As long as it is kept in the dark it is quiet, but when light hits the sensor, WATCH OUT! Sizeof board: 3.75” x 2.25” Operates from one 9V battery (not included). Complete with all parts, PCboard and instructions. Skill Level 1. optional plastic Type 5 box C6367 $3.90Secret Alarm Kit..........................................................................C6455 $7.25PIR Wireless Alarm System KitTurn on a lamp, siren, horn, etc, when a human intruder is detected by this kit. Uses a sophisticated PIR sensorthat is fully assembled and a 433MHz receiver that you build. The PIR can detect the presence of a humanat up to 40 feet away and transmit the intruder detection to the tiny 433MHz receiver kit that you build. Thereceiver consists of a pre-assembled front end 433MHz receiver module and a pre-programmed microcontrollerIC circuit which must be assembled. The size of the receiver PC board is 2.05” x 1.35”. It operates from one9V battery (not included) and has a relay that can switch on your 120VAC lamp, optional sound bomb, orany device of your liking up to the current rating of the contacts. The receiver kit turns on devices for about15 seconds each time an intruder is detected, then resets itself and waits for the next activation. The PIRsensor uses one 9V battery (not included) and can operate for up to a month before the battery needs tobe replaced. The receiver unit can be activated by more than one sensor, so if you purchase more than onesensor you can protect various rooms, garage, etc, in your house. Receiver range to sensor is about 30 feet.Complete package containing one pre-assembled sensor, all parts, PC board and instructions to build thereceiver. Skill level 2. optional plastic Type 2 box C6364 $2.40PIR Wireless Alarm System Kit...............................................C7003 $28.95ALARM KITSGot-Ya KitOne of the sneakiest, disruptive, frustrating kits ever made. Just the ticket for a curious friend who just can’tresist picking up this innocent looking creation. As soon as he or she picks it up, it emits an obnoxious noisewhich can’t be silenced -you can’t turn it off with the switch and the way it is constructed you can’t evenremove the battery! Once they pick it up, they have really messed up, that is unless someone knows theone secret turn off procedure! Uses IC, SCR, CDS cell and transistor circuit. Works on one 9V battery (notincluded). Size of circuit board: 4.125” x 3.875”. Comes with all parts, PC board and instructions (you needto supply glue). Skill Level 2.optional plastic Type 5 box C6367 $3.90Got-Ya Kit......................................................................................C6464 $9.25Burglar Alarm KitUniversal type burglar alarm kit has on board horn and red LED “ON” indicator. Can be used with eithernormally closed and/or normally open loops. This allows you to use reed switches, foil, lever switches,mat switches or just about any type and quantity of switches (switches not included). With the ability touse N.C. and N.O. switches many areas can be protected by this one kit. Operates from 6VDC (batterynot included). Size of board: 3.6” x 2.5”. Skill Level 1.optional plastic Type 5 box C6367 $3.90Burglar Alarm Kit........................................................................C6280 $7.25Window/Door Burglar Alarm KitThis kit makes a great burglar alarm for your home. Whenever anyone attempts to open yourwindow, this kit produces a loud pulsating electronic sound from the built in piezo speaker andit also flashes a bright red LED. The sound won’t stop, even if the window is closed again. Onlyyou can shut it off. The kit will protect a window or door. It is very simple to install as only a smallmagnet (included) needs to be attached (glued) to the movable window or door. Uses IC, SCRand transistor circuitry. Operates on a 9V battery (not included). Size of PC board: 2 1/8” x 3 7/8”.Complete with all parts, PC board, reed switch, magnet and instructions. Skill Level 2.optional plastic Type 5 box C6367 $3.90Window/Door Burglar Alarm Kit.............................................C6703 $8.25Insanity Alarm KitSet this kit in an inconspicuous place with light shining on it and it remains perfectly silent,however, as soon as the light is turned off the kit emits a high pitched irritating tone! When theyturn the light on again to look for the culprit it keeps silent again! Easy to build and loads offun to use. Operates from one 9V battery (not included). Size of board: 2.9” x 1.8”. Completewith all parts, PC board and instructions. Skill Level 1. optional plastic Type 2 box C6364 $2.40Insanity Alarm Kit.......................................................................C6240 $5.25Chaney Electronics, Inc. • PO Box 4116 • Scottsdale, AZ 85261 • www.chaneyelectronics.com 35