2010 PRODUCT CATALOG

GROUPING for Semi-Custom DesignCabINET COmbINaTIONS USING 16" x 30" aND 24" x 30" wITh TOP-mOUNT INCaNDESCENT LIGhTS15¼" 46½"45¾"61"33"16" x 30"/MTL16T Two 24" x 30"/MTL24TThree 16" x 30"/MTL16TFour 16" x 30"/MTL16TCabINET COmbINaTIONS USING PL1637 aRCh CabINETS aND LIGhTS18¼" 48¾"18¼"45¾"37"PL1637MTFLPL1637 with Two PL1630MTFLPL1637/PLL33TTwo PL1630 (outer)/MTL16FOne PL1637 (center)CabINET COmbINaTIONS USING PL1630 aND PL2430 wITh TOP- aND SIDE-mOUNT INCaNDESCENT LIGhTS21¼" 36½"51¾"59¾"33"PL1630MTL16T/PLL33TNOTES aND aSSEmbLy INSTRUCTIONSTwo PL1630MTL16T/PLL33TTwo PL1630 (outer)/MTL16TOne PL1637 (center)/PLL33TTwo PL1630 (outer)/MTL16TOne PL2430 (center)/PLL33T1. Start assemblyby removingdoors from thecabinet boxes.2. If using light fixtures,attach lights to thecabinets.4. If recessing the cabinetinto the wall, no side kit isrequired. Subtract ¾" fromthe overall height and widthfor rough-in dimensions.Fasten cabinet combinationsto wall framing throughmounting holes in cabinet.5. If surface mounting cabinet, firstanchor the bottom mountingstrip and concealed top clipsto the wall. Place the bottomlip of the cabinet in the bottommounting strip, and then fastenthe top clips over the top lip ofthe cabinet. Attach side kit.NOTES:1. One side kit is required forsurface-mount applications.– Top-mount lights include light side kits– MTFL vertical lights use side kits2. When recessing a cabinet (and light) orcombination of cabinets (and lights), therough opening dimension is:– Overall width less ¾"– Overall height less ¾"– Depth 4"3. The PL1637 is 37" high to the top ofthe arch.3. With the cabinetslying flat on thefloor, use theinterconnectinghardware toattach all of thecabinets together.6. After the cabinet is securelyfastened, reattach and adjustthe doors.PRODUCT SELECTION | 135