CONSTRUCTION ENVIRONMENTAL MANAGEMENT PLAN

More documents

Recommendations

Info

Construction Environmental Management PlanPlant and EquipmentTable 2 presents a list of major plant and equipment items to be utilised during Stage 2F construction activities.The actual type and number of construction plant and equipment items will vary throughout the constructionperiod depending on the timing and nature of construction activities being undertaken.A listing of major plant and equipment items to be utilised for individual construction sub-activities is provided inAttachment 1 of the Construction Noise Management Plan (Appendix A).Table 2Major Items of Construction Plant and EquipmentMobile Plant(model/capacity)Rail InfrastructureCoal Storage Area andStacker ReclaimersWharf Facilities andShiploadersMobile Cranes (600 t) - 2 2Mobile Cranes (150 t) 1 3 3Mobile Cranes (100t) - 4 3Mobile Cranes (50 t) - 6 5Mobile Cranes (25 t) - - -Franna (15 t) 2 7 3Elevated Work Platform (EWP) - 7 4Water Trucks 2 2 2Dump Trucks 6 3 -Dozers 4 2 2Excavators 3 3 3Scapers - - -Rollers 3 - -Compactor 2 5 2Graders 2 2 1Tracklaying Machine 1 - -Drill Rigs 1 - -Piling Rigs 1 2 2Loaders 2 1 1Backhoe 1 1 1Concrete Pump 2 6 6Concrete Trucks 3 12 8Forklift 1 2 2Utilities (utes) 20 20 10Source: Aurecon Hatch (2013).14
Construction Environmental Management Plan2.3 CEMP CONTEXT2.3.1 ConsultationConsultation will be conducted with the following government authorities and key community stakeholders withrespect to Project construction activities and the preparation of environmental managementplans/programs/protocols, where relevant:DP&I;OEH (including NSW National Parks and Wildlife Service [NPWS]);EPA;Department of Trade and Investment, Regional Infrastructure and Services (Department of Resources andEnergy);Roads and Maritime Services (RMS);Newcastle City Council (NCC);Australian Rail and Track Corporation (ARTC); andNewcastle Port Corporation.Consultation outcomes have been considered in the preparation of environmental managementplans/programs/protocols where relevant, including the management plans/protocol attached to this CEMP.2.4 CEMP OBJECTIVEThe objective of this CEMP is to detail the environmental management framework, practices and procedures thatwill be followed during construction of the Project to minimise potential environmental impacts and to identifystatutory and other obligations that NCIG is required to fulfil to assist in meeting these objectives.In accordance with Condition 7.3, Schedule 2 of the Project Approval (06_0009), this CEMP provides theframework and overarching environmental management information relevant to construction of the Project. ThisCEMP also includes the following more detailed plans and protocol that address the management issues ofparticular relevance to the site:Construction Noise Management Plan (Appendix A);Acid Sulfate Soil Management Plan (Appendix B);Construction Surface Water Management Plan (Appendix C);Construction Traffic Management Protocol (Appendix D); andConstruction Aboriginal Heritage Management Plan (Appendix E).In addition to the above management plans and protocols, a Construction Fill Transport Assessment(Attachment A of Appendix D) was conducted during the development of the Stage 2F CEMP to assess theadditional vehicle movements associated with the transport of fill material from external sources to the CET.15
Page 1 and 2: NEWCASTLE COALINFRASTRUCTURE GROUPC
Page 3 and 4: Construction Environmental Manageme
Page 7 and 8: L.P.//////// / / // / / ///////////
Page 17: Project ComponentLand Reclamation a
Page 21 and 22: Project DirectorProject ManagerProj
Page 23 and 24: Project ControlsManagerProcurement

CONSTRUCTION ENVIRONMENTAL MANAGEMENT PLAN

Create successful ePaper yourself

Delete template?

Save as template?