SLOVENIA

SI2000 Ganymede 822+ Router User Guide
1.3 Preliminary setup
1.3.1 LAN and TCP/IP setup
© The contents of this document is the property of ISKRATEL KRANJ, SLOVENIA, and may not be copied, reproduced or disclosed to a third party without written consent of the owner
This section of the manual provides important information to keep in mind when setting up the first
connection between your computer and SI2000 Ganymede 822+ Router.
The factory default settings of the SI2000 Ganymede 822+ Router have values listed bellow:
Local IP address: 192.168.1.1
Subnet mask: 255.255.255.0
DHCP server: Disabled
User defined IP address
The default option is to set up the connection by yourself. In this case you must specify the IP
address of your system. Be careful that the subnet values of your system and the router are the
same, e.g. 192.168.1.0 (IP address 192.168.1.1 for router and IP address 192.168.1.2 for computer).
Example is shown on the picture bellow.
Figure 1: User defined IP address set up for Local Area Connection on
computer
KSS5316B0-EDE-010 6/41