LP-Gas Serviceman’s Manual

Repair of the MultiBonnet ®
The MultiBonnet ® is designed to allow quick and easy repair of
bonnet packings in MultiValves ® and Service Valves on active
propane systems. It eliminates the need to evacuate tanks or cylinders
to repair the MultiBonnet ® packing. The two section design
allows repair on MultiBonnet ® assembly without any interruption
in gas service.
The following illustrates the repair of a MultiBonnet ® in a RegO ®
MultiValve ® or Service Valve that is on an active pressurized propane
system. It is important that when actual repairs are conducted,
the individual doing the repairs be completely familiar with and
follow the 19104-800 instruction sheet included with the 19104-80
repair kit. These instructions MUST be followed. ONLY qualified
personnel should attempt installation of the MultiBonnet ® repair
kit. Follow all federal, state, and local regulations.
1
Turn handwheel counterclockwise
as far as possible to assure
valve is completely open and
backseated.
2
Remove self tapping screw and
handwheel.
43