Endumax – an ultra-strong thin tape with a high modulus
1JX6ojQ
1JX6ojQ
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Optional extras<br />
<<strong>strong</strong>>Endumax</<strong>strong</strong>> <strong>tape</strong> c<<strong>strong</strong>>an</<strong>strong</strong>> be supplied <strong>with</strong> the following optional extras: woven structures, color,<br />
pressure-sensitive adhesives, thermoplastic layers <<strong>strong</strong>>an</<strong>strong</strong>>d/or scratch-resist<<strong>strong</strong>>an</<strong>strong</strong>>t layers.<br />
<<strong>strong</strong>>Endumax</<strong>strong</strong>> UD/cross-ply XF23<br />
<<strong>strong</strong>>Endumax</<strong>strong</strong>> UD/cross-ply has excellent stiffness <<strong>strong</strong>>an</<strong>strong</strong>>d ballistic properties. It is ready to stack <<strong>strong</strong>>an</<strong>strong</strong>>d<br />
consolidate to plates, helmets or other shaped parts of different thicknesses. <<strong>strong</strong>>Endumax</<strong>strong</strong>>® is<br />
supplied in st<<strong>strong</strong>>an</<strong>strong</strong>>dard lengths of 150m at a st<<strong>strong</strong>>an</<strong>strong</strong>>dard width of 1.6m, wound on cardboard tubes.<br />
Property Unit Target<br />
Length m 150<br />
Areal density g/m 2 198<br />
Ballistic perform<<strong>strong</strong>>an</<strong>strong</strong>>ce (V50)* m/s ≥ 400<br />
Visual defects**<br />
per roll ≤ 10<br />
≤ 5% length<br />
* The V50 test is performed <strong>with</strong> a 9mm DM41 bullet. <<strong>strong</strong>>Endumax</<strong>strong</strong>> Shield XF23 test pack contains 18 layers. It is pressed according to our<br />
h<<strong>strong</strong>>an</<strong>strong</strong>>dling recommendations <<strong>strong</strong>>an</<strong>strong</strong>>d the shot is fired in accord<<strong>strong</strong>>an</<strong>strong</strong>>ce <strong>with</strong> the Teijin Aramid test method (HE3.04.01).<br />
** Visual deviations from the st<<strong>strong</strong>>an</<strong>strong</strong>>dard surface of the fabric are not removed during production. The location of visual defects is clearly<br />
marked at the side of the fabric. The commercial length of the fabric is calculated as actual length minus calculated length, equal to<br />
all parts <strong>with</strong> defects.<br />
7