2009 - 2010

Furling Accessories
Carbo Furling Lead Block Assemblies
Harken recommends equipping every system with Carbo lead blocks for safe
furling from the cockpit. The 7404 kit’s lightweight, UV-stabilized Carbo blocks
run exclusively on ball bearings for fast trimming under any load.
A 7402 ratchet maintains tension when spooling so the unit can furl smoothly
and easily. The 7403 outboard assembly allows furling line to travel outboard of
the stanchion to keep the sidedeck clear. Block mounts with a strong four-screw
clamp without removing the stanchion or lifelines. Use the 7401 40 mm block
on the bow pulpit as an inboard lead. Both the 7401, 7402 have ball and socket
bases to align blocks for smooth leads aft. The 7404 lead block kit provides a
complete system for most boats.
Stanchion Mount Bases
The 061 and 319 bases for Classic blocks leads furling line inside the stanchion.
Halyard Restrainers
Halyard restrainers prevent the halyard from wrapping around the foil on boats
where the swivel isn’t mounted near the masthead. Stainless steel brackets
feature Hardkote-anodized aluminum sheaves that accommodate both wire
and rope. Halyard restrainers should not be used unless required.
Prefeeders and Snap Shackles
Prefeeders and snap shackles facilitate fast sail changes. The 7006 prefeeder
features Hardkote-anodized rollers with low-friction bushings.
7404
061
7401 7402
7403
319
448
884
944
449 885
945
947
7006
Part
Sheave
Ø
Weight
Max line
Ø
Maximum
working load
No. Description
in mm oz g in mm lb kg
Use with
061 Stanchion mount base — — 2 57 — — 350 159 7
/8", 1" (22, 25 mm) stanchions**
319 Stanchion mount double lead 1 1 /2 38 6 170 — — 350 159 7
/8", 1" (22, 25 mm) stanchions
448 Fixed lead for bulwark 1 1 /2 38 2.1 60 3
/8 10 300 136 0/1/2
449 Fixed lead for bulwark 1 3 /8 35 2.1 60 3
/8 10 500 227 3/3.25
884 Snap shackle — — 2.3 65 — — 1500 680 00AL/0/1
885 Snap shackle — — 5 141 — — 2300 1040 2
944 Halyard restrainer‡
15
/16 25 3 85 — — — — 00AL/0/1
945 Halyard restrainer‡ 1 1 /4 31 6 170 — — — — 2/3/3.25
947 Prefeeder — — 1 28 — — — — All
7006 Carbo racing foil prefeeder — — 3 85 — — — — All
7401 40 mm Carbo lead block assembly 1 9 /16 40 3.7 106 3
/8 10 485 220 1" (25 mm) stanchions
7402 57 mm Carbo ratchet lead block assembly 2 1 /4 57 5.4 152 3
/8 10 500 227 1" (25 mm) stanchions
7403 29 mm Outboard lead block assembly 1 1 /8 29 3.0 84 3
/8 10 — — 1" (25 mm) stanchions
7404 Lead block kit*** Kit includes 3 x 7403/1 x 7401/1 x 7402/1 cleat 1" (25 mm) stanchions
‡#10 RH (5 mm) **Fits Classic Bullet/Big Bullet/2.25"/ratchet blocks with swivel post ***Max line Ø: 3 /8" (10 mm); Weight: 19.2 oz (544 g)
172