BUSH

More documents

Recommendations

Info

CONGRATULATIONS! You have invested in the best implement of its type on the market today. The care you give your Bush Hog implement will greatly determine your satisfaction with its performance and its service life. We urge a careful study of this manual to provide you with a thorough understanding of your new implement before operating, as well as suggestions for operation and maintenance. If your manual should become lost or destroyed, Bush Hog will be glad to provide you with a new copy. Order from Bush Hog, P. O. Box 1039, Selma, Alabama 36702-1039. As an authorized Bush Hog dealer, we stock genuine Bush Hog parts which are manufactured with the same precision and skill as our original equipment. Our trained service personnel are well informed on methods required to service Bush Hog equipment, and are ready and able to help you. Should you require additional information or assistance, please contact us. YOUR AUTHORIZED BUSH HOG DEALER BECAUSE BUSH HOG MAINTAINS AN ONGOING PROGRAM OF PRODUCT IMPROVEMENT, WE RESERVE THE RIGHT TO MAKE IMPROVEMENTS IN DESIGN OR CHANGES IN SPECIFICATIONS WITH- OUT INCURRING ANY OBLIGATION TO INSTALL THEM ON UNITS PREVIOUSLY SOLD. BECAUSE OF THE POSSIBILITY THAT SOME PHOTOGRAPHS IN THIS MANUAL WERE TAKEN OF PROTOTYPE MODELS, PRODUCTION MODELS MAY VARY IN SOME DETAIL. IN ADDITION, SOME PHOTOGRAPHS MAY SHOW SHIELDS REMOVED FOR PURPOSES OF CLARITY. NEVER OPERATE THIS IMPLEMENT WITHOUT ALL SHIELDS IN PLACE.
307 SERIES ROTARY CUTTERS TABLE OF CONTENTS SECTION/PARA PAGE Warranty.................................................2 Dealer Preparation Check List ...............3 Safety Precautions.................................4 Federal Laws and Regulations...............5 I. INTRODUCTION & DESCRIPTION ......6 1-1 Introduction ......................................6 1-2 Description.......................................6 II. PREPARATION FOR USE .....................7 2-1 Attaching To Tractor (3-Point Hitch Models) ......................7 2-2 Attaching To Tractor (Pull Models) .....................................9 III.OPERATING INSTRUCTIONS ..............9 3-1 General Safety.................................9 3-2 Adjusting for Work............................9 3-2.1 Cutting Height Adjustment ............9 3-3 Operation .......................................10 3-4 Transporting...................................10 IV.MAINTENANCE...................................10 4-1 Maintenance Check List ................10 SECTION/PARA PAGE 4-2 Lubrication .....................................11 4-3 Blade Holder Assembly Removal and Installation...............11 4-4 Blade Replacement ......................11 4-5 Slip Clutch Operational Check ......11 4-6 Slip Clutch Adjustment..................12 4-7 Gearbox Maintenance...................12 4-8 Troubleshooting.............................13 V. ASSEMBLY .........................................15 5-1 Lift Models.....................................15 5-2 Gearbox Input Shield ....................15 5-3 Front and Rear Chain Guards.......16 5-4 Front Guard...................................16 5-5 Driveline Installation......................16 5-6 Pull Type with Wheels to Side.......16 5-7 Pull Type with Wheels to Rear ......17 5-8 Offset Pull Type.............................17 Safety Decals ......................................19 Torque Specifications ..........................20 RETAIL CUSTOMER’S RESPONSIBILITY UNDER THE BUSH HOG WARRANTY It is the Retail Customer and/or Operator’s responsibility to read the Operator’s Manual, to operate, lubricate, maintain and store the product in accordance with all instructions and safety procedures. Failure of the operator to read the Operator’s Manual is a misuse of this equipment. It is the Retail Customer and/or Operator’s responsibility to inspect the product and to have any part(s) repaired or replaced when continued operation would cause damage or excessive wear to other parts or cause a safety hazard. It is the Retail Customer’s responsibility to deliver the product to the authorized Bush Hog Dealer, from whom he purchased it, for service or replacement of defective parts which are covered by warranty. Repairs to be submitted for warranty consideration must be made within forty-five (45) days of failure. It is the Retail Customer’s responsibility for any cost incurred by the Dealer for traveling to or hauling of the product for the purpose of performing a warranty obligation or inspection. 1
Page 1: BUSH HOG® 307 SERIES ROTARY CUTTER
Page 5 and 6: DEALER PREPARATION CHECK LIST 307 S
Page 7 and 8: IMPORTANT FEDERAL LAWS AND REGULATI
Page 9 and 10: 2-1 ATTACHING TO TRACTOR (3-Point H
Page 11 and 12: 2-2 ATTACHING TO TRACTOR (Pull Mode
Page 13 and 14: 4-2 LUBRICATION (Figure 4-1) NOTE T
Page 15 and 16: Figure 4-5 Tightening Bearings Old
Page 17 and 18: Figure 5-1 3-Point Hitch A-Frame SE
Page 19 and 20: Figure 5-3 Pull Type With Wheels To
Page 21 and 22: SAFETY DECALS To promote safe opera
Page 23: BUSH HOG DIVISION OF P.O. Box 1039

BUSH

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?