environment

More documents

Recommendations

Info

ar 8 6 4 2 0 Verderair Pure & Solid The Verderair Pure double diaphragm pump is a new, robust, high-end series of VA METALLIC double diaphragm pumps, produced from one-piece solid material. The Verderair Pure is designed for heavy-duty operation, also for harsh liquids and severe process conditions, such as operating VA80 in power plants and refineries. VA50 VA40 The Verderair Pure has all the benefits of a Verderair double diaphragm pump such VA25 as increased productivity through a higher flow rate and reduced operational cost because of lower air consumption. Thanks to the efficient Applications Chemicals transfer Pharmaceutical industry operation there is less maintenance, and an improved working <strong>environment</strong> Solar power industry VA20 is created because the pump makes less noise. The Verderair Pure is Electronics-plating (Galvanics) available in 4 wetted part materials; each pump being made from one solid Refineries piece of the purest and finest PTFE or PE. 0 200 400 600 800 1000 1200 l/m MATERIALS VA NON METALLIC bar 8 Polyethylene (PE) Extremely abrasion resistant. Upto 7 times better then Polypropylene. Chemical resistance is 6 comparable to Polypropylene. VA80 VA50 VA40 4 Conductive VA25 polyethylene Similar VA15properties to polypropylene but conductive for Atex applications. 2 VA10 Teflon (PTFE) Widest chemical compatibility, extreme corrosion resistance, very low frictional coefficient, non-adhesive, high heat resistance. Conductive teflon Similar to PTFE, but electrical conductive (Atex!). VA8 mm VA-P08 VA-P10 VA-P15 VA-P25 VA-P40 VA-P50 0 0Connections 100 200 8 300 10 400 15 50025 60040 700 50 800 900 1000 1100 1200 l/m 6 VA PURE FLOW 17 l/min - 615 l/min FLOW DISCHARGE 17 l/min PRESSURE - 615 up to l/min 7 bar DISCHARGE PRESSURE up to 7 bar bar 4 2 VA-P15 VA-P10 VA-P25 VA-P40 VA-P50 VA-P8 0 0 50 100 200 300 400 500 600 l/min
Verderair Non-Metallic Series Verderair non-metallic double diaphragm pumps are excellent pumps for use in a wide range of applications across many industries. Depending on your wishes, fluid and process specifications, the best solution is selected. Verderair VA offers four non-metallic materials to choose from. Conductive Polypropylene and Acetal can be used in Atex rated zones. PVDF is the best choice for even the most chemically aggressive media. Applications Ink & paper Preparation of CIP solutions Surface finishing Car wash chemicals Water based paints bar 8 6 4 2 MATERIALS VA METALLIC Polypropylene Wide chemical compatibility. General Purpose. VA80 Limited temparature resistant. VA50 VA40 Conductive polypropylene Similar to VA25 standard Polypropylene but electrical conductive (Atex!). VA20 PVDF (Kynar) Conductive Polypropylene and Acetal can be used in Atex rated zones. PVDF is the best choice for even the most chemically aggressive media. Acetal Compatible with many solvent applications and can withstand extreme fatigue. Good resistance to abrasive media and is conductive for Atex applications. 0 mm VA-08 VA-10 VA-15 VA-25 VA-40 VA-50 VA-80 0 Connections 2008 10 40015 25 600 40 50 800 80 1000 1200 l/m VA NON METALLIC 8 FLOW 17 l/min - 1135 l/min DISCHARGE PRESSURE up to 8.6 bar bar 6 4 VA15 VA25 VA40 VA50 VA80 2 VA10 0 VA8 0 100 200 300 400 500 600 700 800 900 1000 1100 1200 l/m VA PURE www.verderair.com Verderair Air Operated Double Diaphragm Pumps | 10
Page 1 and 2: VERDERMAG VERDERair This Air Operat
Page 3 and 4: Verderair Meet the most efficient d
Page 5 and 6: experience diaphragm pumps sold Som
Page 7: The heart of your pump: The air val
Page 11 and 12: Verderair Special Diaphragm Pumps T
Page 13 and 14: Verderair Sparekits The Verderair p
Page 15 and 16: Verderair The most efficient diaphr

environment

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?