Cutters with Bore

Technical Information
Order / Inquiry for Special Tools: Cutters with Bore
Please copy and send the completed form to one of the LEUCO sales offices. (Only one tool description per form)
Customer-no.: Order: o
Company: Inquiry: o
Plant:
Street:
Zip / City:
Country:
Contact partner:
Phone:
City and Date:
Delivery (week no.):
(Not binding)
No. of pieces:
Fax:
Signature:
Machine Type of feed: MAN o MEC o
Make:
Sense of
Left o Right o
Model:
Type (e.g. DET, etc.):
RPM range [min-1]
Feed rate [m/min]:
Workpiece
Description:
rotation:
Mode of
application:
No. of teeth [pcs.]:
Rakers:
Spur:
Grooving knives:
Edge breaker:
Arrangement of cutting edges:
Cutting quality: Shear angle: Single-sided o
Direction of cut: Alternate o
Solid wood With grain o Interface
Across grain o Bore d [mm]:
Against feed o With feed o
On end o Double keyway: Height Width
Wood-based materials Top layer o
Middle layer o Keyway: Height Width
Top and middle layer o
Coating Yes o No o Clamping Bushing [Ø]:
Hydro Bushing [Ø]::
Description:
Hydro-S-System:
Further Information
S-System:
Tool
Other:
Single tool o o check if applicable
Tool set:
With tipped cutting edges: o Please indicate the following on workpiece samples or drawings:
With exchangeable cutting edges: Bottom side of workpiece Dimensions
EcoPro Cutterhead o Sense of rotation Application conditions
SuperProfiler o Motor spindle Profile drawing
UltraProfiler o Hydro Bushing [Ø]:: Tool drawing
Standard
o
Cutting diameter D [mm]:
basic diameter D1 [mm]:
Please indicate clearly if the workpiece or the tool is shown.
Cutting width B [mm]:
Please indicate additional dimension and markings in the tool
Depth of cut [mm]:
drawing.
518-01.0708
3–135