Cutters with Bore

Jointing/Rabbeting/Chamfering/Rounding
222226
DIAMAX p-System Jointing Cutters CM DP
Product
Drawing
B
D
polycrystalline diamond [DP]
d
MAN
Machine / Application Design Advantages Notes
Ι table shaper
Ι for chip-free high-performance
jointing and dividing of solid
woods (free of knots) along and
accross the grain
Ι for jointing and dividing of melamine-,
paper-, HPL-laminated,
foiled and veneered panels and
lacquered surfaces
Ι Finish-quality in the case of
fiber materials such as fabriclaminated
panels, linoleum
with jute fibers, cork etc.
Ι symmetrical design
Ι non-convex design
Ι extremely scoring cut
Ι resharpening area 1.5 mm
Ι maximum cutting quality and
edge lives
Ι large depth of cut possible
Ι application against feed
Ι recommended feed rate per
tooth: wood-based panels 0.8
mm, solid wood 0.4 mm
Ι crowned design on request
Ι sense of rotation according to
DIN-EN 50144
Ø D B b Ø d Z Shear nmin-nmax Ident-No. [L] Ident-No. [R]
125 28,2 35.2 30 2+2 70 6100-10500 symmetrical 184332 184332
125 47,8 54.8 30 2+2 70 6100-10500 symmetrical 184333 184333
125 28,2 35.2 30 3+3 70 6100-10500 symmetrical 184329 184329 s
125 47,8 54.8 30 3+3 70 6100-10500 symmetrical 184330 184330 s
[mm] [mm] [mm] [mm] [°] [min-1]
R
3–79