Cutters with Bore

Technical Information
Checklist for molders (incl. „Weinig Powermat“ series)
Overview of the max.possible number of spindles (please mark with a cross)
Universal spindle (pos. 10) can be combined with every type series.
Universal spindle available: Yes O No O
Additional third spindle above (pos. 11), mostly after the first
spindle below (see pos. 1):
Yes O No O
Pos. 1
Spindle diameter (mm):
HSK interface: Yes O No O
Max. tool diameter (mm):
Max.RPM (min-1): RPM variable: Yes O No O From to
Max. vertical adjusting range (mm):
Max. horizontal adjusting range (mm):
Pos. 2
Spindle diameter (mm):
HSK interface: Yes O No O
Max. tool diameter (mm):
Max.RPM (min-1): RPM variable: Yes O No O From to
Max. vertical adjusting range (mm):
Max. horizontal adjusting range (mm):
Pos. 3
Spindle diameter (mm):
HSK interface: Yes O No O
Max. tool diameter (mm):
Max.RPM (min-1): RPM variable: Yes O No O From to
Max. vertical adjusting range (mm):
Max. horizontal adjusting range (mm):
Pos. 4
Spindle diameter (mm):
HSK interface: Yes O No O
Max. tool diameter (mm):
Max.RPM (min-1): RPM variable: Yes O No O From to
Max. vertical adjusting range (mm):
Max. horizontal adjusting range (mm):
497-03.1207
3–136