Cutters with Bore

Jointing/Rabbeting/Chamfering/Rounding
mounted on Hydro-Bushing Ident-No. 172678
Ø D B Ø d Z nmax Ident-No. [L] Ident-No. [R]
200 42,9 60/40 8+8 9000 asymmetrical 184068 s 184067 s
200 62,5 60/40 8+8 9000 asymmetrical 184070 s 184069 s
[mm] [mm] [mm] [min-1]
223020
Jointing Cutters DP
Product
Drawing
polycrystalline diamond [DP]
MEC
Machine / Application Design Advantages Notes
Ι double end tenoners
Ι edge banding machines
Ι for chip-free jointing of melamine-,
paper-, HPL-laminated,
foiled and veneered panels
Ι tool allows for 3 adjustments =
four single edge lives between
sharpenings
Ι resharpenable area 3.5 mm
Ι opposing shear angle
Ι Ø 150 mm: n max = 12,000
min-1 / Ø 200 mm: n max =
9,000 min-1
Ι two-part version with spacer
rings
Ι the specified feed rates are
based on Ø = 150 mm: n =
9,000 min-1 / Ø = 200 mm: n
= 6,000 min-1
Ι sense of rotation according to
DIN-EN 50144
Ø D B b Ø d Z DKN Recommended feed Ident-No.
150 22 - 28 32 30 3+3 8x3 23 178798 s
200 22 - 28 32 35 4+4 10x4 20 178801 s
200 22 - 28 32 35 5+5 10x4 25 179073 s
200 22 - 28 32 35 6+6 10x4 30 178804
[mm] [mm] [mm] [mm] [mm] [m/min]
3–81