PXA30-K11 Extension module for KNX / EIB - Siemens
PXA30-K11 Extension module for KNX / EIB - Siemens
PXA30-K11 Extension module for KNX / EIB - Siemens
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Ordering<br />
When ordering, please specify the quantity, product name and type code.<br />
Example:<br />
30 <strong>Extension</strong> <strong>module</strong>s <strong>PXA30</strong>-<strong>K11</strong><br />
Design<br />
• Two-part snap-together housing (plastic)<br />
• Cover <strong>for</strong> contact protection<br />
• PCB with electronic components<br />
• Two-pole <strong>EIB</strong>/<strong>KNX</strong> connection terminals<br />
• RJ45 service socket<br />
• Service pin<br />
9280Z01<br />
Mounting<br />
The extension <strong>module</strong> is plugged into the PXC..-U modular automation station.<br />
It is important to follow the instructions supplied with the device, in particular:<br />
• Avoid touching the connector pins (ESD precautions)<br />
• Push the <strong>module</strong> firmly into position (1.5 mm) and check that it is securely in place<br />
so that the fine contact pins interlock properly.<br />
2<br />
1<br />
3<br />
3<br />
1 Plug-in unit<br />
2 Device base<br />
3 <strong>Extension</strong> <strong>module</strong><br />
9280Z02<br />
2/4<br />
<strong>Siemens</strong> <strong>PXA30</strong>-<strong>K11</strong> – <strong>Extension</strong> <strong>module</strong> <strong>for</strong> <strong>KNX</strong> / <strong>EIB</strong> CM1N9280en_02<br />
Building Technologies 18 May 2009