000-fl-fld-eng

More documents

Recommendations

Info

ELINEFL FL BUSBAR PRODUCT ORDER CODES FL External Corner Kit Product Description White Grey Light Brown O r d e r C o d e Brown Oak Texture Coating Walnut Texture Coating ture Cherry Tex- Coating FL 32A 250V, L/N/PE, External Corner Kit, PVC 3048956 3048957 3049179 3048958 3050729 3050762 3050795 116.7 65 69.2 116.7 Top View Side View FL Internal Corner Kit Product Description White Grey Light Brown O r d e r C o d e Brown Oak Texture Coating Walnut Texture Coating ture Cherry Tex- Coating FL 32A 250V, L/N/PE, Internal Corner Kit, PVC 3048953 3048954 3049178 3048955 3050728 3050761 3050794 28 69.2 113.3 113.2 Top View Side View FL Mounting Bracket Set Product Description O r d e r C o d e FL Mounting Bracket Set, PVC 3048968 10
ELINEFL FL BUSBAR MOUNTING FL Busbar Feeder Unit Mounting 1 2 3 4 1-Busbar Feeder unit with cover. 2-Remove the cover of the feed unit and mount the unit on the wall with 2 M6 dowels and screws. 3-Cut the cable cover hole on the cover and remove. 4-Strip the end of the cable and insert through the hole. 5 6 7 8 FL CLICK 5-Fix the cable ends (L/N/PE) into the corresponding terminals and tighten the cable clamp. 6-Replace the feeder unit cover ensuring that the cover is correctly aligned with the end of the busbar. 7-Clip the cover into place ensuring that all of the claws are located. 8-Finally check that the cable is not loose and that the cover is fully slotted. FL Busbar Joint Set Mounting 1 2 3 4 1-Place the connector piece onto the FL Busbar body and insert the conductors between the contacts ensure a secure fit. 2-In the same way offer up the next piece of busbar inserting the conductors into the joint connector piece contacts ensure a secure fit. 3-Clip on the joint set cover piece central to the joint. 4-Check that the joint cover is secure and finish the mounting. FL Busbar End Cap Mounting 1 2 3 4 1-FL Busbar End Cap. 2-Install the End Cap at the end of the busbar run by pushing the tags into the busbar body moulding. 3-Make sure that the end cap is securely in position. 4-Complete the mounting of the end cap using screws as shown above. 11
Page 1 and 2: Indoor Busbar Trunking Systems (32
Page 3 and 4: CONTENTS E-LINE FL Overview General
Page 5 and 6: ELINEFL GENERAL SPECIFICATION Power
Page 7 and 8: ELINEFL SPECIFICATIONS Rated Curren
Page 9 and 10: ELINEFL FL BUSBAR PRODUCT ORDER COD
Page 11: ELINEFL FL BUSBAR PRODUCT ORDER COD
Page 15 and 16: ELINEFL FL BUSBAR AREA OF USAGE Wor
Page 17 and 18: ELINEFLD GENERAL SPECIFICATIONS Pow
Page 19 and 20: ELINEFLD FL DATA BUSBAR COLOURS and
Page 21 and 22: ELINEFLD FLD DATA BUSBAR PRODUCT OR
Page 23 and 24: ELINEFLD FLD DATA BUSBAR PRODUCT OR
Page 25 and 26: ELINEFLD FLD DATA BUSBAR MOUNTING 1
Page 27 and 28: ELINE FL/ FLD FL / FLD BUSBAR AREA
Page 29 and 30: ELINE FL/ FLD Declaration CE DECLAR
Page 31 and 32: Compact Busbar Distribution System

000-fl-fld-eng

Create successful ePaper yourself

Delete template?

Save as template?