000-fl-fld-eng

More documents

Recommendations

Info

ELINEFL FL BUSBAR MOUNTING Bracket Set and FL Busbar Mounting 1 650 - 700mm 2 3 4 35mm A M6 Dowel 1-After determining the required installation height for the FL busbar drill two pairs of rawlplug holes for each bracket at 35mm vertical centres and 650-700mm horizontally. 2-Insert the rawlplugs into the holes. 3-Fix the wall brackets with screws as shown above. 4-Ensure that all of the wall brackets are correctly aligned. 5 6 7 8 5-Offer up the FL Busbar close to the wall brackets. 6-First hook the lower clamps at the back of the busbar body onto the sprung section of the wall bracket and push upwards. 7-Then hook the upper clamps at the back of the busbar body onto the top of the wall bracket. 8-To complete the mounting of the FL Busbar check that the clamps are secure. 9 10 OFF ON OFF ON FL BUSBAR minimum offset return distance is 20 cm. Order special modules by submitting dimensions for off-set returns lower than 20 cm. 9-Connect the internal and external corners using the same method used in fitting the connector piece and fix to the wall using the rawlplugs and screws. 10-Insert the FL socket into the trunking and secure it by turning in the specified direction. Caution: The “ON” position must be aligned to the top edge of the FL Busbar. ATTENTION: FL Busbar can be cut to l<strong>eng</strong>th during installation. A stand saw is recommended for this. 12
ELINEFL FL BUSBAR AREA OF USAGE Workshops FL Laboratories 13
Page 1 and 2: Indoor Busbar Trunking Systems (32
Page 3 and 4: CONTENTS E-LINE FL Overview General
Page 5 and 6: ELINEFL GENERAL SPECIFICATION Power
Page 7 and 8: ELINEFL SPECIFICATIONS Rated Curren
Page 9 and 10: ELINEFL FL BUSBAR PRODUCT ORDER COD
Page 11 and 12: ELINEFL FL BUSBAR PRODUCT ORDER COD
Page 13: ELINEFL FL BUSBAR MOUNTING FL Busba
Page 17 and 18: ELINEFLD GENERAL SPECIFICATIONS Pow
Page 19 and 20: ELINEFLD FL DATA BUSBAR COLOURS and
Page 21 and 22: ELINEFLD FLD DATA BUSBAR PRODUCT OR
Page 23 and 24: ELINEFLD FLD DATA BUSBAR PRODUCT OR
Page 25 and 26: ELINEFLD FLD DATA BUSBAR MOUNTING 1
Page 27 and 28: ELINE FL/ FLD FL / FLD BUSBAR AREA
Page 29 and 30: ELINE FL/ FLD Declaration CE DECLAR
Page 31 and 32: Compact Busbar Distribution System

000-fl-fld-eng

Create successful ePaper yourself

Delete template?

Save as template?