Fisher Scientific Focus Products 2011

Fisherbrand* Colour-Coded TainerTop* Safety Closures
Colours correspond to
Vacutainer* cap colours,
ensuring easy identification
• For 13mm culture tubes
• Polyethylene
• Information can be written directly
on cap with indelible ink
• Ensure integrity of serum samples
after freezing or en route to reference labs
• Don’t require precutting
Pk/1000
• Won’t pop or crack when frozen
• Provide liquid-tight seal — will not aerosol when opened
• Hold fast under most rigorous procedures including agitation, centrifugation,
refrigeration and freezing
• Flexible closures are not autoclavable
Colour Cat. No.
White 14-376-69
Red 14-376-70
Lavender 14-376-71
Green 14-376-72
Blue 14-376-73
Fisherbrand* Nonsterile Plastic Tubes
Extra-heavy wall construction
is ideal for numerous testing
applications
• Clear polystyrene; without cap
• Round bottom
• Special molding avoids leaks and cracks
• 5mL capacity with heavier wall than competitive tubes
O.D. x L Cat. No.
12 x 75mm 14-961-10
Fisherbrand* Externally and Internally Threaded Cryogenic Storage Vials
Fisherbrand* Shaker Flasks
Ideal for suspension cell culture,
media preparation and storage
• Nonpyrogenic and noncytotoxic
• Autoclavable (flask and closure)
• Clear, durable polycarbonate with
molded-in graduations
• Polypropylene closure with 0.22µm
PTFE pore
• Individually packed for easy storage
and handling
• Plain bottom for use on benchtop or
baffled bottom for shaker table use
• Vented or non-vented screw closure
Choice of externally threaded vials with HDPE closures for aseptic technique, or internally
threaded vials featuring polypropylene clo- Externally threaded
sures with silicone gasket for tight seal • Conical-style bottom
• Sterile; not autoclavable
• High density polyethylene
• Noncytotoxic, nonpyrogenic
• Self-standing
• Large white writing area
Internally threaded
• Graduations in 0.5mL increments
• With silicone gasket
• Use with Fisherbrand Colour Coders for easier sample • Polypropylene
identification
• Conical- or round-style bottoms with a star-style foot
Note: Vials are for research use only; not for in vitro diagnosis or parenterals. Cryogenic
vials are intended for placement only in the vapor phase of liquid nitrogen, and should not
be used for storage in the liquid phase of liquid nitrogen. Immersion of the vials in the liquid
phase could result in penetration of the liquefied gas into the vial, resulting in rapid vaporization
of the liquid upon removal and possible violent explosion or leakage from the vial/
closure perimeter. To prevent cryogenic vials from exploding, never overfill liquid nitrogen
storage units. Always examine vials before use to ensure no visible defects around the
closure rims. Always use full faceshields, heavy safety gloves and laboratory protective
apparel when removing vials from cryogenic storage. Always permit vials to warm slowly
in a biological safety cabinet. Never reuse cryogenic vials.
CERTIFICATIONS:
CE marked
Capacity Quantity/Case Cat. No.
Plain Bottom, Vented Closure
4.22 oz. (125mL) 24 PBV125
8.45oz. (250mL) 12 PBV250
16.9 oz. (500mL) 12 PBV500
33.8 oz. (1000mL) 6 PBV1000
67.6 oz. (2000mL) 4 PBV2000
94.6 oz. (2800mL) 4 PBV2800
Plain Bottom, Non-vented Closure
4.22 oz. (125mL) 24 PBNV125
8.45 oz. (250mL) 12 PBNV250
16.9 oz. (500mL) 12 PBNV500
33.8 oz. (1000mL) 6 PBNV1000
Baffled Bottom, Vented Closure
4.22 oz. (125mL) 24 BBV125
8.45 oz. (250mL) 12 BBV250
16.9 oz. (500mL) 12 BBV500
33.8 oz. (1000mL) 6 BBV1000
67.6 oz. (2000mL) 4 BBV2000
94.6 oz. (2800mL) 4 BBV2800
Capacity Bottom Style Foot Style O.D. x H Pk/ Cat. No.
Externally Threaded Vials
1.2mL Conical ---- 13.5 x 38mm 100 10-500-25
2.0mL Conical ---- 13.5 x 48mm 100 10-500-26
5.0mL Conical ---- 13.5 x 92mm 50 10-500-27
Internally Threaded Vials
1.2mL Conical Star Foot 12.5 x 42mm 100 12-567-500
2.0mL Round Star Foot 12.5 x 49mm 100 12-567-501
5.0mL Round Star Foot 12.5 x 92mm 100 12-567-502
24 *Trademark. For ownership, see www.fishersci.com/trademarks.