Fisher Scientific Focus Products 2011
Fisher Scientific Focus Products 2011
Fisher Scientific Focus Products 2011
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Fisher</strong> <strong>Scientific</strong>* Isotemp* Basic Magnetic Stirrers<br />
Compact, low-profile stirrers<br />
with analogue control<br />
Operating Features<br />
• Variable speed control from 60 to<br />
1200rpm<br />
• Speed is set easily, even when<br />
wearing heavy gloves<br />
• Microprocessor controller maintains<br />
consistent stirring under changing<br />
viscosities<br />
• Large LED speed display<br />
• RESET key restores last settings<br />
• Base includes support rod mount with thumbscrew for rods up to 13mm dia.<br />
• Load capacity: 25 lb. (11kg)<br />
Safety Features<br />
• INSTANT ON begins stirring at a slow 50rpm to prevent splashing<br />
• White ceramic top plate models resist alkalis and acids, clean easily<br />
• Contoured housing diverts spills away from internal components<br />
• Includes detachable 3-wire line cord and plug, PTFE stir bar<br />
COMPLIANCE:<br />
IEC 1010<br />
CERTIFICATIONS:<br />
cUL, CSA approved<br />
Top Plate Size<br />
Top Plate<br />
Material<br />
Electrical<br />
Requirements<br />
Cat. No.<br />
4.25 x 4.25” (10.8 x 10.8cm) Ceramic 120V 50/60Hz 11-100-16S<br />
7.25 x 7.25” (18.4 x 18.4cm) Ceramic 120V 50/60Hz 11-100-49S<br />
10.25 x 10.25” (26.0 x 26.0cm Ceramic 120V 50/60Hz 11-100-100S<br />
<strong>Fisher</strong> <strong>Scientific</strong>* Isotemp* Digital Dry Bath Incubator<br />
Provides controlled dry heat<br />
for a wide variety of clinical<br />
and general chemistry<br />
applications<br />
• Exceptional temperature control<br />
and uniformity<br />
• Temperature range of 5°C above<br />
ambient to 130°C<br />
• Powder-coated steel body<br />
construction provides durability for<br />
demanding applications<br />
• Compact design saves valuable bench space<br />
• Choice of interchangeable heating blocks<br />
• PID microprocessor control, digital temperature setting<br />
• Just press UP/DOWN arrows to set temperature in 0.1° increments<br />
• Effectively hold samples at constant, warm temperature<br />
• 5°C above ambient to 130°C range; ±0.4° uniformity at 37°C; stability, ±0.2°C<br />
• Bright LED display continuously shows actual temperature in °C<br />
• Temperature probe in bottom of bath provides improved accuracy and<br />
control; free probe included<br />
• Accepts two 2.91L × 3.75W × 2”H (7.4 × 9.5 × 5.1cm) blocks, sold separately<br />
• Includes temperature probe, line cord and plug<br />
CERTIFICATIONS:<br />
CSA approved<br />
No. of<br />
Blocks<br />
Electrical<br />
Requirements<br />
2 120V 50/60Hz,<br />
1.25A, 150w<br />
Overall L x W x H Shipping<br />
Weight<br />
Cat. No.<br />
14.44L x 8.69W x<br />
3.31”H<br />
6 lb. (3kg) 11-715-125DQ<br />
<strong>Fisher</strong> <strong>Scientific</strong>* Vortex Mixers<br />
Durable, rugged vortexers<br />
offer exceptional versatility<br />
and value<br />
• Dimensions: 6.88L × 4.88W × 4.88”H<br />
(17.3 × 12.2 × 12.2cm)<br />
• Net weight: 11 lb. (5kg)<br />
• Supplied with cup head and 3”<br />
(7.6cm) rubber head with cover<br />
Analogue Mixer<br />
• Variable analogue speed control<br />
from 300 to 3000rpm (maximum<br />
speed will vary depending on<br />
accessory used) for gentle to<br />
vigorous mixing action<br />
• Continuous mode for use with accessory attachments<br />
• Touch mode activated when depressing the cup head<br />
• Three-way power switch<br />
• Supplied with cup head and 3” (7.6cm) head with cover<br />
Digital Mixer<br />
• Ideal for applications demanding repeatable results<br />
• Variable speed control from 500 to 3000rpm (maximum speed will vary<br />
depending on accessory used)<br />
• Touch keypad controls and LED display for speed and time<br />
• Microprocessor control maintains set speed for consistent mixing<br />
• Timer displays countup during continuous run; countdown during timed run<br />
• Continuous or touch modes<br />
• Three-way power switch<br />
• Supplied with cup head and 3” (7.6cm) head with cover<br />
CERTIFICATIONS:<br />
cUL listed<br />
Model RPM Electrical Reqts. Cat. No.<br />
Analogue 0 to 3000 120V 50/60Hz, 150W 02-215-365<br />
Digital 300 to 3000 120V 50/60Hz, 150W 02-215-370<br />
<strong>Fisher</strong> <strong>Scientific</strong>* Isotemp* 500 Series Economy Lab Oven<br />
Ideal for small drying and sterilizing jobs<br />
Sturdy, reach-in gravity convection oven<br />
is well suited to bacteriological, clinical,<br />
educational and industrial labs on a tight<br />
budget. Light enough to move as needed.<br />
• Temperature range: Ambient +5° to 210°C<br />
• Capacity: 1.7 cu. ft.<br />
• Features front-mounted electronic temperature<br />
control, red heating cycle indicator, ON/OFF<br />
switch and green power indicator<br />
• Continuous temperature uniformity<br />
• Built-in backup controller for safety<br />
• Double-wall construction of heavy-gauge steel with 1” (2.5cm) layer of<br />
impregnated fibreglass<br />
• Aluminium chamber<br />
• Door opens 180°; cool-touch handle and positive dual spring-loaded latches<br />
• Three-shelf capacity<br />
• Includes thermometer holder, line cord with grounded plug; three shelves<br />
• Requires thermometer (13-246; order separately)<br />
Electrical Requirements Capacity Cat. No.<br />
120V 50/60Hz, 6.7A, 800w 1.7 cu. ft. 13-246-516GAQ<br />
Phone: 1.800. 234.7437 Fax: 1.800.463.2996 www.fishersci.ca one source. infinite solutions. ®<br />
3
Change language