08.12.2012 Views

Fisher Scientific Focus Products 2011

Fisher Scientific Focus Products 2011

Fisher Scientific Focus Products 2011

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

<strong>Fisher</strong> <strong>Scientific</strong>* Isotemp* Standard Lab Incubator<br />

30° to 75°C (86° to 167°F) range<br />

Incubator with gravity flow circulation provides accurate, efficient<br />

heating for routine laboratory procedures: drying and staining of<br />

slides, paraffin embedding, tissue culture work, incubation of antibody<br />

tests, microbiological determinations, crystallization studies and more.<br />

Electrical receptacle inside (5A at 120V) to plug in a stirrer, shaker or<br />

other apparatus.<br />

• Capacity: 5.0 cu. ft. (141.6L)<br />

• Temperature: Range 30° to 75°C (86° to 167°F); average uniformity ±0.7°C at<br />

37°C; resolution 0.1°C; control sensitivity ±0.1°C; recovery time 2 min.<br />

• Air changes: 3/hr.<br />

• BTU/hr. at 75°C: 430<br />

Easy to operate<br />

• Microprocessor control<br />

• Keypad with arrow keys to increase or decrease set point temperature in<br />

0.1°C increments<br />

• Overtemperature value is automatically set at 3°C above setpoint<br />

• PID controller comes with fixed parameters so no tuning is required<br />

• Circuit breaker protects incubator from power surges; battery backup<br />

• Designed to stack two units<br />

Big three-character LED display<br />

• Digits display actual temperature to nearest 0.1°C<br />

• Display shows current value for set point temperature<br />

• HEAT indicator light cycles on and off to show when incubator heaters are on<br />

• ALARM indicator lights up if temperature exceeds overtemperature limit;<br />

backup controller maintains temperature at 3°C above setpoint; safety backup<br />

built into software<br />

<strong>Fisher</strong> <strong>Scientific</strong>* Sonic Dismembrators<br />

Choice of small or large volume processing with 50 to 700W of power<br />

• For 117V 50/60Hz<br />

• Includes generator, converter, 0.125 or 0.5” probe (depending on model),<br />

cables, wrench set<br />

Model 50<br />

• Economical, small-volume cell disruptor<br />

• Compact, portable and extremely simple to operate<br />

• Weighs less than 4 lb.; highly effective for cell disruption, sample preparation<br />

and many other small volume applications<br />

• Processes 0.2 to 50mL<br />

• 50W<br />

• Continuous or Remote operation (footswitch optional)<br />

• Lightweight converter for handheld operation<br />

Model 120<br />

• Programmable system for effective cell lysis and sample preparation delivering<br />

consistent and reproducible results<br />

• Ideal for small sample size<br />

• Manual and programmable operation<br />

• Processes 0.2 to 100mL<br />

• Programmable from 1 second to 10 hours<br />

• Overload protection<br />

• Pulse mode (1 second to 59 seconds)<br />

Model 505<br />

• High-power, programmable system ideal for nanotechnology, cell disruption<br />

and homogenization applications<br />

• Same programmable features as Model 120 but delivers substantially more<br />

power<br />

Construction<br />

• Durable, enamel-coated steel<br />

exterior<br />

• Extruded aluminium trim has<br />

acrylic powder coating<br />

• Easy-to-clean stainless-steel<br />

chamber<br />

• Low-watt-density heater elements<br />

are designed for long life<br />

• Silicone gasket on outer door and<br />

3” thick (7.6cm) fibreglass insulation<br />

throughout prevent heat loss<br />

• Outer door opens to 180° for unhindered access and features two grabbertype<br />

latches<br />

• Inner door is tempered glass<br />

• Two steel shelves (included): 17.37” wide and 16.75” front-to-back (44 ×<br />

42.5cm)<br />

• Black synthetic rubber feet keep incubator from slipping and maintain a<br />

space between incubator and benchtop for ventilation<br />

• Exterior L × W × H: 23.5 × 26 × 39” (60 × 66 × 99cm)<br />

• Interior D × W × H: 18 × 18 × 26.5” (46 × 46 × 67cm)<br />

• Shipping weight: 145 lb. (66kg)<br />

• 120V 60Hz, 320w, 2.7A<br />

CERTIFICATIONS:<br />

CSA approved.<br />

Model Capacity Shelves Cat. No.<br />

Large 5.0 cu. ft. (141.6L) 2 11-690-650D<br />

• Processes small and large sample<br />

volumes<br />

• Processes 0.5 to 500mL<br />

• 500W<br />

• Programmable from 1 second to<br />

10 hours<br />

• Pulse mode (1 second to<br />

59 seconds)<br />

• Energy display (watts and Joules)<br />

Model 705<br />

• Ultrahigh power with advanced<br />

programming for DNA shearing/ChIP and all liquid processing applications<br />

• Easy-to-use touchscreen control and overload protection<br />

• Processes 0.2 to 1000mL<br />

• 700W<br />

• Programmable from 1 second to 99 hours<br />

• Saves up to 10 different programs<br />

• Pulse mode (1 second to 24 hours)<br />

• Temperature monitoring (requires optional temperature probe)<br />

Model Power Requirements Cat. No.<br />

50 50W FB-501-10<br />

120 120W FB-120-110<br />

505 500W FB-505-110<br />

705 700W FB-705-110<br />

Phone: 1.800. 234.7437 Fax: 1.800.463.2996 www.fishersci.ca one source. infinite solutions. ®<br />

5

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!