Fisher Scientific Focus Products 2011

More documents

Recommendations

Info

Fisher Scientific* Isotemp* General-Purpose Refrigerator/Freezer Ideal for storing nonvolatile reagents, samples and specimens • Temperature range from 2° to 13°C (refrigerator), -18° to -10°C (freezer) • Total capacity: 17.9 cu. ft. (507L) • Refrigerator capacity: 12.9 cu. ft. (365L) • Freezer capacity: 5.0 cu. ft. (142L) • User-switchable to manual or automatic defrost • Controls at front of refrigerator for easy access • Separate adjustment of refrigerator and freezer temperatures • CFC-free R134-A refrigerant • Yellow warning label reads: “Laboratory Refrigerator” • Foamed polyurethane insulation ensures temperature uniformity • Textured white enamel steel exterior resists marking • Refrigerator has two white vinyl-coated–steel slide-out adjustable shelves, two tinted slide-out bottom drawers, four door shelves • Freezer has one compartment and two door shelves • Two adjustable, two fixed rollers on bottom for easy installation and leveling • Exterior dimensions, 30.75L × 30W × 66”H (78 × 76 × 168cm) • Requires air clearance of 3” (7.6cm) around top, back and sides • Shipping weight, 240 lb. (109kg) • For 115V, 60Hz; has NEMA 5-15 plug, requires NEMA-15 receptacle. CERTIFICATIONS: cUL listed. Description Cat. No. Refrigerator/Freezer 13-986-106A Fisher Scientific* accumet* AB15 Basic pH/mV/°C Meter Simple, menu-guided operation in an affordable pH/mV meter Easy operation, accuracy and affordability • Large LCD guides user with plain-language prompts and error messages • Display indicators keep you apprised of menu choice, measuring units, buffers standardized (in pH mode) and temperature • No cryptic icons to learn: prompts and status/error messages are displayed in plain language • Store up to 50 datapoints in nonvolatile memory • Powerful pH mode offers selectable resolution to 0.01pH; range -1.99 to +19.99pH with relative accuracy of ±0.01pH • mV mode: Range of 0 to ±1800mV (abs. or rel.) with 0.1mV resolution and ±0.2mV relative accuracy Fisher Scientific* Isotemp* Digital-Control Water Baths Ideal for industrial, clinical, pharmaceutical or biomedical procedures Microprocessor PID Control • ±0.24°C uniformity, ±0.5°C accuracy and stability at 37°C • Display shows °C or °F; easy to read from across the room Safety Features • Low profile and front-panel controls for easier access, safer operation • Dual thermostats guard against thermal runaway • Hinged acrylic or stainless-steel gable covers have fins that keep hands away from hot vapours • Covers stay open at 90° or, with quick-release hinge, lift off completely for use with large glassware • Heating elements will not burn out if bath accidentally runs dry Construction • Corrosion-resistant exterior with tough, easy-to-clean acrylic enamel coating • Temperature-resistant plastic rim insulates, resists leaks, keeps its shape and won’t dry out or crack like caulked seals • Exterior stays cool even after hours of operation • Deep-drawn, stainless-steel reservoirs and perforated sample trays prevent leaks, guard against rust and contamination • Rounded reservoir corners and sample trays with finger holes allow for easy removal, make cleaning easier • With acrylic cover CERTIFICATIONS: CSA approved. Model 205 210 220 Capacity 1.38 gal. (5L) 2.62 gal. (10L) 5.25 gal. (20L) Reservoir 5.88 x 11.75 x 6” 12.88 x 11.75 x 6” 11.75” x 19.75 x 6” L x W x D (14.8 x 30 x 15cm) (33 x 30 x 15cm) (30 x 50 x 15cm) Overall 10.5 14.12 x 6.25” 16.38 x 15.38 x 8.88” 16.38 x 24.38 x 8.88” L x W x H (27 x 36 x 19cm) (42 x 39 x 23cm) (42 x 62 x 23cm) Shipping weight 9.88 lb. (4.5kg) 16.5 lb. (7.5kg) 22.25 lb. (10.1kg) Electrical Reqts. 120V/60Hz 120V/60Hz 120V/60Hz Cat. No. 15-462-5Q 15-462-10Q 15-462-20Q • Temperature mode: Range of -5.0° to +105.0°C (23° to 221°F) with 0.1°C resolution and ±0.5°C relative accuracy • Automatic recognition of 15 buffers and five-point calibration • BNC and reference pin electrode inputs, ATC probe input, and input for accuFet* electrode • Dimensions: 7.5L × 5.5W × 3.25”H (19 × 14 × 8cm) • Net weight: 1.875 lb. (0.8kg) • Includes power supply, electrode support (13-637-671), operation manual, accumet liquid-filled, glass body combination pH Ag/AgCl Electrode (13-620-285) and separate ATC probe (13-620-19) Package Electrodes Cat. No. Meter Kit/pH accumet Ag/AgCl pH Combination Electrode 13-620-285; ATC Probe 13-620-19 13-636-AB15 2 *Trademark. For ownership, see www.fishersci.com/trademarks.
Fisher Scientific* Isotemp* Basic Magnetic Stirrers Compact, low-profile stirrers with analogue control Operating Features • Variable speed control from 60 to 1200rpm • Speed is set easily, even when wearing heavy gloves • Microprocessor controller maintains consistent stirring under changing viscosities • Large LED speed display • RESET key restores last settings • Base includes support rod mount with thumbscrew for rods up to 13mm dia. • Load capacity: 25 lb. (11kg) Safety Features • INSTANT ON begins stirring at a slow 50rpm to prevent splashing • White ceramic top plate models resist alkalis and acids, clean easily • Contoured housing diverts spills away from internal components • Includes detachable 3-wire line cord and plug, PTFE stir bar COMPLIANCE: IEC 1010 CERTIFICATIONS: cUL, CSA approved Top Plate Size Top Plate Material Electrical Requirements Cat. No. 4.25 x 4.25” (10.8 x 10.8cm) Ceramic 120V 50/60Hz 11-100-16S 7.25 x 7.25” (18.4 x 18.4cm) Ceramic 120V 50/60Hz 11-100-49S 10.25 x 10.25” (26.0 x 26.0cm Ceramic 120V 50/60Hz 11-100-100S Fisher Scientific* Isotemp* Digital Dry Bath Incubator Provides controlled dry heat for a wide variety of clinical and general chemistry applications • Exceptional temperature control and uniformity • Temperature range of 5°C above ambient to 130°C • Powder-coated steel body construction provides durability for demanding applications • Compact design saves valuable bench space • Choice of interchangeable heating blocks • PID microprocessor control, digital temperature setting • Just press UP/DOWN arrows to set temperature in 0.1° increments • Effectively hold samples at constant, warm temperature • 5°C above ambient to 130°C range; ±0.4° uniformity at 37°C; stability, ±0.2°C • Bright LED display continuously shows actual temperature in °C • Temperature probe in bottom of bath provides improved accuracy and control; free probe included • Accepts two 2.91L × 3.75W × 2”H (7.4 × 9.5 × 5.1cm) blocks, sold separately • Includes temperature probe, line cord and plug CERTIFICATIONS: CSA approved No. of Blocks Electrical Requirements 2 120V 50/60Hz, 1.25A, 150w Overall L x W x H Shipping Weight Cat. No. 14.44L x 8.69W x 3.31”H 6 lb. (3kg) 11-715-125DQ Fisher Scientific* Vortex Mixers Durable, rugged vortexers offer exceptional versatility and value • Dimensions: 6.88L × 4.88W × 4.88”H (17.3 × 12.2 × 12.2cm) • Net weight: 11 lb. (5kg) • Supplied with cup head and 3” (7.6cm) rubber head with cover Analogue Mixer • Variable analogue speed control from 300 to 3000rpm (maximum speed will vary depending on accessory used) for gentle to vigorous mixing action • Continuous mode for use with accessory attachments • Touch mode activated when depressing the cup head • Three-way power switch • Supplied with cup head and 3” (7.6cm) head with cover Digital Mixer • Ideal for applications demanding repeatable results • Variable speed control from 500 to 3000rpm (maximum speed will vary depending on accessory used) • Touch keypad controls and LED display for speed and time • Microprocessor control maintains set speed for consistent mixing • Timer displays countup during continuous run; countdown during timed run • Continuous or touch modes • Three-way power switch • Supplied with cup head and 3” (7.6cm) head with cover CERTIFICATIONS: cUL listed Model RPM Electrical Reqts. Cat. No. Analogue 0 to 3000 120V 50/60Hz, 150W 02-215-365 Digital 300 to 3000 120V 50/60Hz, 150W 02-215-370 Fisher Scientific* Isotemp* 500 Series Economy Lab Oven Ideal for small drying and sterilizing jobs Sturdy, reach-in gravity convection oven is well suited to bacteriological, clinical, educational and industrial labs on a tight budget. Light enough to move as needed. • Temperature range: Ambient +5° to 210°C • Capacity: 1.7 cu. ft. • Features front-mounted electronic temperature control, red heating cycle indicator, ON/OFF switch and green power indicator • Continuous temperature uniformity • Built-in backup controller for safety • Double-wall construction of heavy-gauge steel with 1” (2.5cm) layer of impregnated fibreglass • Aluminium chamber • Door opens 180°; cool-touch handle and positive dual spring-loaded latches • Three-shelf capacity • Includes thermometer holder, line cord with grounded plug; three shelves • Requires thermometer (13-246; order separately) Electrical Requirements Capacity Cat. No. 120V 50/60Hz, 6.7A, 800w 1.7 cu. ft. 13-246-516GAQ Phone: 1.800. 234.7437 Fax: 1.800.463.2996 www.fishersci.ca one source. infinite solutions. ® 3
Page 1 and 2: Private Label Top Products
Page 3: General laboratory Fisher Scientifi
Page 7 and 8: Fisher Scientific* Isotemp* Standar
Page 9 and 10: Fisher Scientific* Isotemp* Chromat
Page 11 and 12: Fisherbrand* Lab-Jacks* Nonsparking
Page 13 and 14: Fisherbrand* Polymer Carts Rugged m
Page 15 and 16: Fisherbrand* Stir Bars Egg-shaped o
Page 17 and 18: Fisherbrand* White Autoclavable Tap
Page 19 and 20: Fisher Scientific* accuCap* Capilla
Page 21 and 22: Fisherfinest* Premium Cover Glasses
Page 23 and 24: Fisherbrand* Reusable Glass Media B
Page 25 and 26: Fisherbrand* Sterile Plastic Tubes
Page 27 and 28: Fisherbrand* Cell Lifter and Scrape

Fisher Scientific Focus Products 2011

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?