Separator Bible
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Victor Marine Limited<br />
Eurocourt<br />
Cosgrove Road<br />
West Thurrock,<br />
United Kingdom<br />
Vat Reg. no. GB133212520<br />
Tel: +44 (0)1708 899780<br />
Fax: +44 (0)1708 890599<br />
Web: www.victormarine.com<br />
Painting Specification for Oily Water <strong>Separator</strong>s, Sewage Treatment Plants and other items<br />
The following document details the standards and procedures required when undertaking a blast cleaning operation<br />
to carbon steel substrate to provide a uniform surface profile and coating operations with specified products.<br />
Mask off all valves, pipes and fittings before painting. All surfaces to be coated should be clean, dry and free<br />
from contamination. Prior to paint application all surfaces should be assessed and treated in accordance with<br />
ISO 8504:2000. Prepare the paint and surface of the material as per Paint Manufacturer's specifications and<br />
requirements.<br />
http://www.international-pc.com/resource-centre/documents/surface-preparation.pdf<br />
Carbon Steel – Internal of shell<br />
Grit blast to Swedish standard Sa2½<br />
Apply one coat of International paints Interseal 670HS (white) to @ 125µm minimum DFT as per data sheet<br />
Ensure over coating time has been met as per paint specifications.<br />
Apply another coat of International paints Interseal 670HS (white) to @ 125µm DFT minimum as per data sheet<br />
Ensure complete unit is hard dried<br />
Check total internal DFT meets a minimum of 250µm<br />
http://www.international-pc.com/PDS/2394-P-eng-A4.pdf<br />
Carbon Steel – External of shell assembly<br />
Grit blast to Swedish standard Sa2½<br />
Apply one coat International paints Intergard 251 epoxy zinc phosphate primer/build coat @ 75µm DFT<br />
Ensure over coating time has been met as per paint specifications<br />
Apply another coat International paints Intergard 251 epoxy zinc phosphate primer/build coat @ 75µm DFT<br />
Ensure over coating time has been met as per paint specifications<br />
Apply topcoat International paints Interthane 990, acrylic polyurethane finish coating @ 50µm DFT<br />
Ensure complete unit is hard dried before packaging and transportation.<br />
Standard finish colour topcoat BS5252 18E53 - (Cornflower - International B571) or specified by customer.<br />
http://www.international-pc.com/PDS/2113-P-eng-A4.pdf<br />
http://www.international-pc.com/PDS/2484-P-eng-A4.pdf<br />
Issue: 02 21.10.2015