Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
MODULITE ® POWER MODULES<br />
119179<br />
POWER MODULES<br />
MODULITE ® PROTECTOR<br />
• The unit is rated for up to 2.1 amps for Turns/Stops circuits and 5.6 amps for<br />
the Taillight circuit<br />
• Draws power directly from the vehicle battery and uses less than 5mA of the<br />
vehicle circuit for sensing to turn the trailer functions on and off<br />
• Will work with either LED/Incandescent bulbs (vehicle & trailer)<br />
• Has integrated re-settable Short Circuit and Overload protection, to safeguard<br />
itself and the tow vehicle from shorts and installation wiring mishaps<br />
• Designed not to send feedback thru the vehicle circuits<br />
• The trailer brakes will override the hazard lamps when the brake is activated<br />
• The taillight circuit has been upgraded to work with vehicles that use a pulse<br />
width modulation (PWM), this will allow the converter to turn on fully and gives<br />
the trailer lights full brightness during activation<br />
• Will not work with vehicles with low-side switch<br />
• Can be used on a 2 wire or 3 wire system<br />
• All solid-state components in potted encapsulation<br />
• Includes integrated protective cover<br />
Part No. Description Packaging<br />
119179 Modulite ® Protector Clam<br />
119179-012 Modulite ® Protector (12 Pack) Bulk<br />
119179-050 Modulite ® Protector (50 Pack) Bulk<br />
119180 Modulite ® Protector & Wiring Kit (119179 & 118151) Clam<br />
119147<br />
119180<br />
MODULITE ® HD PROTECTOR<br />
• The unit is rated for up to 4.2 amps for Turns/Stops circuits and 7.5 amps for<br />
the Taillight circuit<br />
• Draws power directly from the vehicle battery and uses less than 5mA of the<br />
vehicle circuit for sensing to turn the trailer functions on and off<br />
• Will work with either LED/Incandescent bulbs (vehicle & trailer)<br />
• Has integrated re-settable Short Circuit and Overload protection, to safeguard<br />
itself and the tow vehicle from shorts and installation wiring mishaps<br />
• Designed not to send feedback thru the vehicle circuits<br />
• The trailer brakes will override the hazard lamps when the brake is activated<br />
• The taillight circuit has been upgraded to work with vehicles that use a pulse<br />
width modulation (PWM), this will allow the converter to turn on fully and gives<br />
the trailer lights full brightness during activation<br />
• Will not work with vehicles with low-side switch<br />
• Can be used on a 2 wire or 3 wire system<br />
• All solid-state components in potted encapsulation<br />
• Includes integrated protective cover<br />
Part No. Description Packaging<br />
119147 Modulite ® HD Protector Clam<br />
119147-012 Modulite ® HD Protector (12 Pack) Bulk<br />
119147-050 Modulite ® HD Protector (50 Pack) Bulk<br />
119148 Modulite ® HD Protector & Wiring Kit (119147 & 118151) Clam<br />
ELECTRICAL WIRING & ACCESSORIES<br />
119148<br />
† = Available while supply lasts.<br />
www.cequentgroup.com ©2015 <strong>Cequent</strong> Performance Products, Inc. P/N 98929-<strong>2016</strong> Rev. A. 11/15 for <strong>2016</strong><br />
C-10