15.06.2016 Views

Apex - Catalogue complet

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

E N G I N E T O O L S<br />

■■Puller Removes Balancers, Pulleys, and Gears with Tapped Holes<br />

■■Floating Swivel Prevents Damage to the Shaft End<br />

■■Four Slots in the Yoke Allow for 2- or 3-Hole Applications<br />

■■Tool Bolts to Balancer with Center Screw on the End of the<br />

Crankshaft<br />

■■Tighten while Tapping on the Screw Head to Remove Balancer<br />

■■Puller includes 3/8-24 UNF, 5/16-18 UNC, 3/8-16 UNC and 10mm x<br />

1.5 Screws for most American and Imported Cars<br />

Harmonic Balancer Puller<br />

Cat. No. UPC No. Packaging Description Product Weight Shelf Pack Qty.<br />

2286D 082171022869 Carded Harmonic Balancer Puller 2.25 lb 1<br />

228675 082171337420 Bagged Replacement Part: Yoke and Screw Swivel 1.35 lb 1<br />

228677 082171337444 Bagged Replacement Part: Screw Assortment 1.00 lb 1<br />

Piston Ring Compressor Set<br />

■■Set Includes Pliers and 6 Bands, 1119 Through 1124<br />

■■Install Pistons From 2-7/8 to 4-3/8" (73 to 111mm)<br />

■■Pliers Can Be Used Parallel or Perpendicular to the Cylinder Block<br />

■■Fine-Tooth Ratcheting Lock Allows You to Compress Bands in Small Increments<br />

■■Set Works By Placing a Band Around the Piston, Covering the Rings and Hooking<br />

Pliers Into the Band and Squeezing<br />

■■With the Band Tightly Around the Piston, Insert Piston Into Cylinder and Tap Lightly<br />

With Hammer Handle to Install<br />

Cat. No. UPC No. Packaging Description Product Weight Shelf Pack Qty.<br />

850DD 082171008504 Boxed Piston Ring Compressor Set 2.18 lb 1<br />

Cat. No. Description Cat. No. Description<br />

1119D Piston Ring Compressor Band (2-7/8" to 3-1/8") 1123D Piston Ring Compressor Band (3-7/8" to 4-1/8")<br />

1120D Piston Ring Compressor Band (3-1/8" to 3-3/8") 1124D Piston Ring Compressor Band (4-1/8" to 4-3/8")<br />

1121D Piston Ring Compressor Band (3-3/8" to 3-5/8") 1125D Piston Ring Compressor Band (4-3/8" to 4-5/8")<br />

1122D Piston Ring Compressor Band (3-5/8" to 3-7/8")<br />

16<br />

Piston Ring Compressor Pliers<br />

■■Use these Pliers to Install Pistons from 2-5/8 to 5-7/8" (67 to 149mm) in Diameter<br />

■■Self-Locking Ratchet Allows you to Compress Rings in Small Increments<br />

■■Pliers can be used Parallel or Perpendicular to the Cylinder Block on Most Bands<br />

Cat. No. UPC No. Packaging Product Weight Shelf Pack Qty.<br />

1114D 082171011146 Carded 0.80 lb 1<br />

A U T O S P E C I A L T Y<br />

1179

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!