Apex - Catalogue complet

T O R Q U E W R E N C H E S
■■Made in the USA - Quality and Availability
■■Low Input Torque is Required and Can be Applied Easily
by One Person Using Standard 1/2" Drive Torque Wrenches.
■■Internal Planetary Gear System Provides Strength and Durability
Plus an Output Torque Accuracy of +/-5%
■■Square Drive Shears at 3% to 10% of Overload Torque to
Protect Against Expensive Internal Damage and the Square Drive
Can Then be Easily Replaced.
■■Built in Anti-Backlash Maintains the Multipliers Input Torque
Allowing the Use of Ratcheting Head Torque Wrench
■■Built in Angle of Turn Protractor Displays the Output Angle for
Use on Fasteners Requiring a Specific Angle Rotation After
Applied Torque.
■■The Torque Multiplier with an Impact Socket on the Output
Square is Placed on the Fastener to be Turned with the Reaction
Bar Restrained Against Some Substantial Part of the Equipment
Being Serviced.
■■Input and Output Rotation Directions Are the Same (If Input
is Clockwise, Output is Clockwise). Torque Reaction on the
Reaction Arm is in the Opposite Direction From the
Input/Output Force
■■Accuracy; +/- 5% CW From 20% to 100% of Wrench Capability
Cat. No. UPC No. Input Drive
2,200 Foot Pound Reaction Bar Torque Multiplier
Output
Drive
Max Input
(ft.lb.)
Max Output
(ft.lb.)
Gear Ratio
Torque
Ratio
Head
Width
Overall
Length
Replacement
Square Drive
64-834 781412648348 1/2 in 1 in 162 ft/lb 2200 ft/lb 15.0:1 13.6:1 4.031 in 20.000 in 64-851 20.60 lb
Product
Weight
T O R Q U E W R E N C H E S 7
■■Made in the USA - Quality and Availability
■■Low Input Torque is Required and Can be Applied Easily
by One Person Using Standard 1/2" Drive Torque Wrenches.
■■Internal Planetary Gear System Provides Strength and Durability
Plus an Output Torque Accuracy of +/-5%
■■Square Drive Shears at 3% to 10% of Overload Torque to
Protect Against Expensive Internal Damage and the Square Drive
Can Then be Easily Replaced.
■■Built in Anti-Backlash Maintains the Multipliers Input Torque
Allowing the Use of Ratcheting Head Torque Wrench
■■Built in Angle of Turn Protractor Displays the Output Angle for
Use on Fasteners Requiring a Specific Angle Rotation After
Applied Torque.
■■The Torque Multiplier with an Impact Socket on the Output
Square is Placed on the Fastener to be Turned with the Reaction
Bar Restrained Against Some Substantial Part of the Equipment
Being Serviced.
■■Input and Output Rotation Directions Are the Same (If Input
is Clockwise, Output is Clockwise). Torque Reaction on the
Reaction Arm is in the Opposite Direction From the
Input/Output Force
■■Accuracy; +/- 5% CW From 20% to 100% of Wrench Capability
3,200 Foot Pound Reaction Bar Torque Multiplier
Output Max Input Max Output
Torque Head Overall Replacement Product
Cat. No. UPC No. Input Drive Drive (ft.lb.) (ft.lb.) Gear Ratio Ratio Width Length Square Drive Weight
64-836 781412648362 1/2 in 1 in 173 ft/lb 3200 ft/lb 20.2:1 18.5:1 4.031 in 20.000 in 64-852 22.10 lb
802