14.12.2016 Views

EXPLORER

7dTeR8

7dTeR8

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Driving Aids<br />

The following are other situations that may<br />

limit the Cross Traffic Alert performance:<br />

• Adjacently parked vehicles or objects<br />

obstructing the sensors.<br />

• Approaching vehicles passing at<br />

speeds greater than 37 mph<br />

(60 km/h).<br />

• Driving in reverse faster than 7 mph<br />

(12 km/h).<br />

• Backing out of an angled parking spot.<br />

False Alerts<br />

Note: If your vehicle has a tow bar with a<br />

factory equipped trailer tow module and it<br />

is towing a trailer, the sensors will<br />

automatically turn the Cross Traffic Alert<br />

off. If your vehicle has a tow bar but no<br />

factory equipped trailer tow module, it is<br />

recommended to turn the Cross Traffic Alert<br />

off manually. Operating Cross Traffic Alert<br />

with a trailer attached will cause poor Cross<br />

Traffic Alert performance.<br />

There may be certain instances when there<br />

is a false alert by the Cross Traffic Alert<br />

system that illuminates the alert indicator<br />

with no vehicle in the coverage zone. Some<br />

amount of false alerts are normal; they are<br />

temporary and self-correct.<br />

System Errors<br />

If Cross Traffic Alert senses a problem with<br />

the left or right sensor a message will<br />

appear in the information display. See<br />

Information Messages (page 113).<br />

Switching the System Off and On<br />

You can temporarily switch Cross Traffic<br />

Alert off in the information display. See<br />

General Information (page 99). When<br />

you switch Cross Traffic Alert off, you will<br />

not receive alerts and the information<br />

display will display a system off message.<br />

Note: The Cross Traffic Alert switches on<br />

whenever the ignition is switched on and<br />

ready to provide appropriate alerts when<br />

the transmission is in reverse (R). Cross<br />

Traffic Alert will not remember the last<br />

selected on or off setting.<br />

You can also have Cross Traffic Alert<br />

switched off permanently at an authorized<br />

dealer. Once switched off permanently,<br />

the system can only be switched back on<br />

at an authorized dealer.<br />

STEERING<br />

Electric Power Steering<br />

WARNINGS<br />

The electric power steering system<br />

has diagnostic checks that<br />

continuously monitor the system. If<br />

a fault is detected, a message displays in<br />

the information display. Stop your vehicle<br />

as soon as it is safe to do so. Switch the<br />

ignition off. After at least 10 seconds,<br />

switch the ignition on and watch the<br />

information display for a steering system<br />

warning message. If a steering system<br />

warning message returns, have the system<br />

checked by an authorized dealer.<br />

If the system detects an error, you<br />

may not feel a difference in the<br />

steering, however a serious condition<br />

may exist. Obtain immediate service from<br />

an authorized dealer, failure to do so may<br />

result in loss of steering control.<br />

Your vehicle has an electric power steering<br />

system. There is no fluid reservoir. No<br />

maintenance is required.<br />

If your vehicle loses electrical power while<br />

you are driving, electric power steering<br />

assistance is lost. The steering system still<br />

operates and you can steer your vehicle<br />

manually. Manually steering your vehicle<br />

requires more effort.<br />

226<br />

Explorer (TUB) Canada/United States of America, enUSA, Edition date: 03/2016, First Printing

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!